Sign in
PHOENIX CONTACT Field Device Connectors (FDC)VC-K-KV-PG16( 7-10,5) 1853751 PHOENIX CONTACT Cable gland
PHOENIX CONTACT VC-K-KV-PG16( 7-10,5) 1853751 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

VC-K-KV-PG16( 7-10,5) 1853751 PHOENIX CONTACT Cable gland

Reference: VC-K-KV-PG16( 7-10,5)

Code: 1853751

Manufacturer: PHOENIX CONTACT

Description:

Cable gland
Pg16 split cable gland, made of plastic, consisting of a sealing rubber with a drill and a clamping screw, for construction housings 1, cable [mm] 7 - 10.5
Pg16 half screw connection, plastic, comprising rubber seal with one hole and a pressure screw, for type 1 housing, cable: 7 - 10.5 [mm]

Categories:

  • Cable and wire entry systems > Cable gland
  • PHOENIX CONTACT > Field Device Connectors (FDC)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • ETIM
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

MORE INFO

Technical data
Notes
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• Operate the connector only when it is fully plugged in.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product properties
Product typeHalf screw connection
Product familyVARIOCON
No. of conductors1
Type of the screw connectionHalf screw connection
Shieldedno
Data management status
Article revision03
Dimensions
Width29.5 mm
Height29.5 mm
Length24.2 mm
Wrench size, union nut27 mm
Thread type on seal sidePg16
Material specifications
Colorgray
MaterialTPE (Seal)
Polycarbonate (Screw connection)
Seal materialTPE
Cable/line
External cable diameter Cable 17 mm ... 10.5 mm
Mechanical properties
Mechanical data
Type of the screw connectionHalf screw connection
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67
Ambient temperature (operation)-20 °C ... 100 °C

ETIM for 1853751 Cable glands and cable entry products (EC000441)

Feature nameNominal thread size inch/gas pipe thread (EF007838)
Feature valueOther
Feature nameWrench width (EF000177)
Feature value27 mm
Feature nameSuitable for cable diameter (EF005466)
Feature value7 mm
Feature nameMaterial (EF002169)
Feature valuePlastic
Feature nameMaterial quality (EF001257)
Feature valueThermoplastic Elastomer (TPE)
Feature nameSurface protection (EF000139)
Feature valueUntreated
Feature nameHalogen free (EF000025)
Feature valueNo
Feature nameDegree of protection (IP) (EF005474)
Feature valueOther
Feature nameModel (EF000010)
Feature valueStraight
Feature nameSeparable screw gland (EF005337)
Feature valueNo
Feature nameOperating temperature (EF001742)
Feature value-20 °C
Feature nameExplosion-tested version (EF004191)
Feature valueNo
Feature nameFor Ex-zone gas (EF005728)
Feature valueNone
Feature nameFor Ex-zone dust (EF008404)
Feature valueNone
Feature nameFor armoured cable (EF012184)
Feature valueNo
Feature nameEMC-version (EF001062)
Feature valueNo
Feature nameScreened (EF000881)
Feature valueNo
Feature namePressure-compensating (EF024919)
Feature valueNo

DATASHEET - PDF

Title
Size
Type
PHOENIX CONTACT-1853751-VC-K-KV-PG16( 7-10,5)
94 Kbytes
PDF CATALOG PHOENIX CONNECTORS EN
68 Mbytes

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.