5/5 .
— CHE 5/6/26, 10:33 AM
Customer rating:
Product:MTZ18-4VM DANFOSS REFRIGERATION Reciproc...
Images are for illustrative purposes only. Please refer to data sheet for details.
MCR-T-UI-E-NC 2814126 PHOENIX CONTACT Temperature measuring transducer
Reference: MCR-T-UI-E-NC
Code: 2814126
Manufacturer: PHOENIX CONTACT
Description:
Temperature measuring transducer
Categories:
- PHOENIX CONTACT > INTERFACE Components (IF)
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT
- More Info
- Reviews
* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.
Go to successor article:MACX MCR-T-UI-UP2811394
Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.
MORE INFO
Key Commercial Data
| Orderkey | 2814126 |
|---|---|
| Packing unit | 1 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 136 (C-7-2013) |
| GTIN | 4017918139445 |
| Weight per Piece (excluding packing) | 124.700 g |
| Custom tariff number | 85437090 |
| Country of origin | DE (Germany) |
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|
Input data
| Configurable/programmable | Yes, unconfigured |
|---|---|
| Sensor types (RTD) that can be used | Pt, Ni, Cu sensors |
| Sensor types that can be used (TC) | U, T, L, J, E, K, N, S, R, B, C, W, HK |
| Linear resistance measuring range | 0 Ω ... 8000 Ω (freely adjustable, min. measuring range 100 Ω) |
| Sensor input current | 250 µA (resistance thermometer) |
| Temperature measuring range | Depending on sensor type used |
| Connection technology | 2, 3, 4-wire |
| Protective circuit | Transient protection |
| Surge protection 30 V DC | |
| Connection method | Pluggable screw connection |
Output data
| Output name | Voltage output / current output |
|---|---|
| Configurable/programmable | Yes, unconfigured |
| Voltage output signal | 0 V ... 5 V |
| 0 V ... 10 V | |
| -5 V ... 5 V | |
| -10 V ... 10 V | |
| 10 V ... 0 V | |
| 5 V ... 0 V | |
| 10 V ... -10 V | |
| 5 V ... -5 V | |
| 1 V ... 5 V | |
| Current output signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA | |
| 20 mA ... 0 mA | |
| 20 mA ... 4 mA | |
| Max. output voltage | ± 12 V |
| Max. output current | 24 mA |
| Output voltage range with wire break | -12 V ... 12 V |
| Output current range with wire break | 0 A ... 24 mA |
| Output voltage range with overrange/underrange | -12 V ... 12 V |
| Output current range with overrange/underrange | 0 A ... 24 mA |
| Load/output load voltage output | ≥ 10 kΩ |
| Load/output load current output | ≤ 500 Ω |
| Ripple | < 20 mVPP |
| Protective circuit | Transient protection |
| D/A resolution | ± 12 bit |
Switching output
| Output name | Transistor output, pnp |
|---|---|
| Output description | Can carry a load of 100 mA, switches supply voltage (not protected against short-circuit); locked in case of order-specific configuration, otherwise freely programmable through MCR/PI-CONF-WIN |
| Output voltage range | 18 V DC ... 30 V DC (switches supply voltage, not short-circuit resistant) |
| Continuous load current | 100 mA |
Power supply
| Supply voltage range | 18 V DC ... 30 V DC |
|---|---|
| Max. current consumption | ≤ 60 mA |
| Typical current consumption | 40 mA |
Connection data
| Connection method | Pluggable screw connection |
|---|---|
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 14 |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Stripping length | 8 mm |
| Screw thread | M3 |
General
| Maximum transmission error | ≤ 0.1 % (of maximum range, ±6 mV or ±12 µA at output) |
|---|---|
| Maximum temperature coefficient | ≤ 0.01 %/K |
| Temperature coefficient, typical | 0.005 %/K |
| Cold point error, max. | ≤ 3 K |
| Typical cold point errors | 1.5 K |
| Test voltage input/output | 1 kV (50 Hz, 1 min.) |
| Test voltage input/power supply | 1 kV (50 Hz, 1 min.) |
| Color | green |
| Housing material | Polyamide PA non-reinforced |
| Mounting position | any |
| Conformance | CE-compliant |
| UL, USA/Canada | Class I, Div. 2, Groups A, B, C, D or Non-Hazardous Locations |
| GL | DNV GL |
Standards and Regulations
| Connection in acc. with standard | CUL |
|---|---|
| Conformance | CE-compliant |
| UL, USA/Canada | Class I, Div. 2, Groups A, B, C, D or Non-Hazardous Locations |
| GL | DNV GL |
Environmental Product Compliance
| China RoHS | Environmentally Friendly Use Period = 50 |
|---|---|
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
eCl@ss 4.027200206eCl@ss 4.127200206eCl@ss 5.027200206eCl@ss 5.127200200eCl@ss 6.027200200eCl@ss 7.027200206eCl@ss 8.027200206eCl@ss 9.027210129
DATASHEET - PDF
Title
Size
Type
Latest Customer Reviews
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.
5/5 merci beaucoup
— sotitradim 11/29/25, 11:12 AM
Customer rating:
Product:SL20,MNM,IP42,300lm,1H SL2MNM42H1C EATON...
4/5 a,azing to use it
— B rahul 10/4/25, 8:05 AM
Customer rating:
Product:661601 LEGRAND URA21LED 70LM 1H IP42 NP
4/5 Amazing to use it
— B rahul 10/4/25, 8:04 AM
Customer rating:
Product:661601 LEGRAND URA21LED 70LM 1H IP42 NP