5/5 .
— CHE 5/6/26, 10:33 AM
Product:MTZ18-4VM DANFOSS REFRIGERATION Reciproc...

Images are for illustrative purposes only. Please refer to data sheet for details.
Reference: MACX MCR-EX-SL-UI-REL
Code: 2906164
Manufacturer: PHOENIX CONTACT
Description:
Categories:
Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT
LAST VIEWED
| Orderkey | 2906164 |
|---|---|
| Packing unit | 1 |
| Catalog page | Page 168 (C-5-2019) |
| GTIN | 4055626043173 |
| Custom tariff number | 85437090 |
| Ambient temperature (operation) | -20 °C ... 65 °C (Any mounting position) |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | ≤ 2000 m |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Degree of protection | IP20 |
| Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
| Signal input | Intrinsically safe |
|---|---|
| Voltage input signal | 0.1 V ... 10 V |
| Current input signal | 0.2 mA ... 20 mA |
| 0.18 mA ... 21 mA (Maximum range) | |
| Input resistance of voltage input | > 100 kΩ |
| Input resistance current input | < 28 Ω |
| Switching hysteresis | off: approx. 0.5 %, on: approx. 1 % |
| Line fault detection | Break U |
| Short circuit U > 10.8 V, I > 21.1 mA |
| Output name | Relay output |
|---|---|
| Contact type | 1 PDT |
| Contact material | AgSnO2, hard gold-plated |
| Max. switching current | ≤ 4 A AC (cos phi = 1) |
| ≤ 1 A DC (ohmic load, 24 V DC, 50 mW) | |
| ≤ 0.2 A DC (ohmic load, 120 V DC) | |
| Mechanical service life | ≤ 107cycles |
| Nominal supply voltage | 24 V DC |
|---|---|
| Supply voltage range | 9.6 V DC ... 30 V DC (12 V DC ... 24 V DC (-20 % ... +25 %)) |
| Typical current consumption | 38 mA (24 V DC) |
| Max. current consumption | 90 mA (10 V DC) |
| Power dissipation | < 0.9 W |
| Power consumption | ≤ 1.2 W |
| Connection method | Screw connection |
|---|---|
| Stripping length | 7 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Torque | 0.5 Nm ... 0.6 Nm |
| Maximum transmission error | 0.1 % |
|---|---|
| Maximum temperature coefficient | 0.01 %/K |
| Step response (0–99%) | ≤ 22 ms |
| Status display | Green LED (supply voltage, PWR) |
| Red LED, flashing (line, sensor error, ERR) | |
| Yellow LED (switching output) | |
| Degree of pollution | 2 |
| Overvoltage category | II |
| Electromagnetic compatibility | Conformance with EMC directive |
| Interference emission | EN 61000-6-4 |
| Housing material | PA 6.6-FR |
| Designation | Input/output |
| Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
| Designation | Input/output/supply, DIN rail connector |
| Electrical isolation | 300 Vrms(Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1)) |
| 2.5 kV (50 Hz, 1 min., test voltage) | |
| Designation | Input/supply, DIN rail connector |
| Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
| Input voltage Ui | 30 V (Current and voltage input) |
|---|---|
| Input current Ii | 120 mA (Current and voltage input) |
| Input power Pi | 900 mW (Current and voltage input) |
| Max. internal inductance Li | negligible |
| Max. internal capacitance Ci | 75 nF (for current input) |
| Max. output voltage Uo | 0 V DC (Current input) |
| Max. output current Io | 0 mA (Current input) |
| Max. output power Po | 0 mW (Current input) |
| Group | IIC |
| Max. external inductivity Lo | 100 mH |
| Max. external capacitance Co | 3.3 µF |
| Group | IIC |
| Max. external inductivity Lo | 5 mH |
| Max. external capacitance Co | 4.7 µF |
| Group | IIC |
| Max. external inductivity Lo | 1 mH |
| Max. external capacitance Co | 6.3 µF |
| Group | IIB/IIIC |
| Max. external inductivity Lo | 100 mH |
| Max. external capacitance Co | 16 µF |
| Group | IIB/IIIC |
| Max. external inductivity Lo | 5 mH |
| Max. external capacitance Co | 24 µF |
| Group | IIB/IIIC |
| Max. external inductivity Lo | 1 mH |
| Max. external capacitance Co | 35 µF |
| Safety-related maximum voltage Um | 253 V AC |
| Electromagnetic compatibility | Conformance with EMC directive |
|---|---|
| Noise emission | EN 61000-6-4 |
| Group | IIC |
| IIC | |
| IIC | |
| IIB/IIIC | |
| IIB/IIIC | |
| IIB/IIIC |
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| eCl@ss 4.0 | 27210100 |
|---|---|
| eCl@ss 4.1 | 27210100 |
| eCl@ss 5.0 | 27210100 |
| eCl@ss 5.1 | 27210100 |
| eCl@ss 6.0 | 27210100 |
| eCl@ss 7.0 | 27210120 |
| eCl@ss 8.0 | 27210120 |
| eCl@ss 9.0 | 27210120 |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.
5/5 .
— CHE 5/6/26, 10:33 AM
Product:MTZ18-4VM DANFOSS REFRIGERATION Reciproc...
5/5 merci beaucoup
— sotitradim 11/29/25, 11:12 AM
Product:SL20,MNM,IP42,300lm,1H SL2MNM42H1C EATON...
4/5 a,azing to use it
— B rahul 10/4/25, 8:05 AM
Product:661601 LEGRAND URA21LED 70LM 1H IP42 NP
4/5 Amazing to use it
— B rahul 10/4/25, 8:04 AM
Product:661601 LEGRAND URA21LED 70LM 1H IP42 NP