PHOENIX CONTACT  FLM DO 4 M8-2A 2736932 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

FLM DO 4 M8-2A 2736932 PHOENIX CONTACT Distributed I/O device

Reference: FLM DO 4 M8-2A

Code: 2736932

Manufacturer: PHOENIX CONTACT

Description:

Distributed I/O device
The space-saving local bus system is specially designed for use in the immediate vicinity of the process. Functions: 4 digital outputs each with 2 A chargeable, precise diagnostics per channel, protection against short circuits and overload, M8 connection technology

Categories:

  • PHOENIX CONTACT > I/O

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Key Commercial Data

Orderkey2736932
Packing unit1 pc
NoteMade to Order (non-returnable)
Catalog pagePage 217 (C-6-2017)
GTIN4046356087193
Weight per Piece (excluding packing)137.000 g
Custom tariff number85176200
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Dimensional drawing
CaptionSide view (dimensions in mm)
Width29.8 mm
Height143 mm
Depth26.5 mm
Note on dimensionsLength details incl. fixing clips
Drill hole spacing133 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 60 °C
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (storage/transport)95 %
Air pressure (operation)80 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protectionIP65/IP67

General

Mounting typeWall mounting
Net weight137 g

Interfaces

DesignationFieldline local bus
Connection method2 M8 male connector
Designation connection pointCopper cable
Transmission speed500 kbps
Number of positions5

Power supply for module electronics

Connection methodM8 connector
DesignationUL
Number of positions4
Supply voltage24 V DC
Supply voltage range18 V DC ... 30 V DC (including ripple)
Supply current3 A

Fieldline potentials

Voltage supply UL24 V DC

Digital outputs

Output nameDigital outputs
Connection methodM8 connector
Connection technology2, 3-wire
Number of outputs4
Type of protectionShort-circuit protection
Output voltage24 V DC
Maximum output current per channel2 A

Electrical isolation

Test sectionTo I/O 500 V AC

Standards and Regulations

Mechanical testsShock in acc. with EN 60068-2-27/IEC 60068-2-27 Load 30g, half sine wave, positive and negative per direction
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g in each space direction
Connection in acc. with standardCUL
Protection classIII, IEC 61140, EN 61140, VDE 0140-1

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.