PHOENIX CONTACT  ILC 200 IB 2729800 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

ILC 200 IB 2729800 PHOENIX CONTACT Controller

Reference: ILC 200 IB

Code: 2729800

Manufacturer: PHOENIX CONTACT

Description:

Controller
Inline controller, without connector and labeling surface. The controller is installed by replacing a standard Inline bus coupler. Like a bus coupler, it links the station to the priority INTERBUS network.

Categories:

  • PHOENIX CONTACT > Control Systems (CST)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Key Commercial Data

Orderkey2729800
Packing unit1 pc
Catalog pagePage 93 (AX-2005)
GTIN4017918185992
Weight per Piece (excluding packing)342.400 g
Custom tariff number85371091
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Width109.8 mm
Height119.8 mm
Depth71.5 mm

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 55 °C
Ambient temperature (storage/transport)-25 °C ... 75 °C
Permissible humidity (operation)5 % ... 85 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 85 % (non-condensing)
Air pressure (operation)70 kPa ... 108 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)66 kPa ... 108 kPa (up to 3500 m above sea level)
Shock25g, Criterion 1, according to IEC 60068-2-27
Vibration (operation)2g, criterion 1 according to IEC 60068-2-6

Control system

Engineering toolPC WORX
Diagnostics toolDIAG+ from version 1.14

Mechanical design

Weight320 g
Diagnostics displayNo
Controller redundancyNo

Data interfaces

InterfaceINTERBUS local bus (master)
Number1
Connection methodInline data jumper
Transmission speed500 kBaud / 2 MBaud (can be switched)
InterfaceHigher-level INTERBUS remote bus (slave)
Connection methodInline shield connector
Transmission speed500 kBaud
InterfaceParameterization/operation/diagnostics
Number1
Connection method6-pos. MINI DIN socket (PS/2)
Transmission speed19200 Baud

Power supply

Power supply connection8-pos. Inline connector
Typical current consumption153 mA (no local bus device connected during idling, bus inactive)
Supply voltage24 V DC
Supply voltage range19.2 V DC ... 30 V DC
Residual ripple± 5 %
Power dissipationmax. 3.25 W
Max. total permissible current consumption of all I/O terminal blocksCommunications power (7,5 V DC) ≤ 2 A DC
Analog supply (24 V DC) ≤ 0.5 A

Fieldbus function

Amount of process datamax. 4096 Bit (INTERBUS-Master)
160 Bit (INTERBUS-Slave)
Number of parameter datamax. 8 Byte (configurable)
Number of supported devicesmax. 512
Number of local bus devices that can be connectedmax. 63 (observe current consumption)
Number of devices with parameter channelmax. 62
Number of supported branch terminals with remote bus branchmax. 15

Direct I/Os

Input nameDigital inputs
Number of inputs4
Connection methodInline potential distributor
Connection technology2, 3, 4-wire
Description of the inputInterrupt input, fast counter, pulse generator
Output nameDigital outputs
Number of outputs2
Connection methodSpring-cage connection
Connection technology2, 3, 4-wire
Maximum output current per channel500 mA
Number of pulse direction outputs2
Limit frequency20 kHz
Number of inputs4
Input frequency40 kHz

IEC 61131 runtime system

Engineering toolPC WORX
Program memorytyp. 384 kByte (32 K instructions (IL))
Mass storage330 kByte
Retentive mass storage8 kByte (NVRAM)
Number of control tasks8

Standards and Regulations

Vibration (storage/transport)2g, criterion 1 according to IEC 60068-2-6
Shock25g, Criterion 1, according to IEC 60068-2-27
Vibration (operation)2g, criterion 1 according to IEC 60068-2-6

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications

DATASHEET - PDF

Title
Size
Type

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.