PHOENIX CONTACT  DFK-IPC 16/ 5-GU-10,16 1702523 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

DFK-IPC 16/ 5-GU-10,16 1702523 PHOENIX CONTACT Feed-through header

Reference: DFK-IPC 16/ 5-GU-10,16

Code: 1702523

Manufacturer: PHOENIX CONTACT

Description:

Feed-through header
Wall pass-through housing, nominal section: 16 mm², color: green, nominal current: 76 A, nominal voltage (III/2): 1000 V, contact surface: silver, contact type: Female, number of potentials: 5, number of rows: 1, number of poles: 5, number of connections: 5, family of articles: DFK-IPC 16/.. -GU, pitch: 10.16 mm, mounting: Wave soldering, pin arrangement: Linear pin arrangement, pin length [P]: 4.1 mm, number of solder pins per potential: 3, plug-in system: COMBICON PC 16, Plug-in face orientation: inverted, locking: without, fixing type: without, packaging type: boxed
Feed-through header, nominal cross section: 16 mm2, color: green, nominal current: 76 A, rated voltage (III/2): 1000 V, contact surface: Ag, contact connection type: Socket, number of potentials: 5, number of rows: 1, number of positions: 5, number of connections: 5, product range: DFK-IPC 16/..-GU, pitch: 10.16 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 4.1 mm, number of solder pins per potential: 3, plug-in system: COMBICON PC 16, Pin connector pattern alignment: reversed, locking: without, mounting: without, type of packaging: packed in cardboard

Categories:

  • Connectors > Printed circuit board connector
  • PHOENIX CONTACT > PCB Connectors (PCC)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • ETIM
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Technical data

Product properties
Product typeFeed-through header
Product familyDFK-IPC 16/..-GU
Product lineCOMBICON Connectors XL
TypeFeed-through header
Number of positions5
Pitch10.16 mm
Number of connections5
Number of rows1
Number of potentials5
Mounting flangewithout
Pin layoutLinear pinning
Solder pins per potential3
Data management status
Article revision02

Electrical properties
Nominal current IN76 A
Nominal voltage UN1000 V
Rated voltage (III/3)1000 V
Rated surge voltage (III/3)8 kV
Rated voltage (III/2)1000 V
Rated surge voltage (III/2)8 kV
Rated voltage (II/2)1000 V
Rated surge voltage (II/2)6 kV

Mounting
Mounting typeWave soldering
Pin layoutLinear pinning

Material specifications
Material data - contact
NoteWEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact materialCu alloy
Surface characteristicscompletely silver-plated
Metal surface contact area (top layer)Silver (4 - 8 µm Ag)
Metal surface soldering area (top layer)Silver (4 - 8 µm Ag)
Material data - housing
Color (Housing)green (6021)
Insulating materialPA
Insulating material groupI
CTI according to IEC 60112600
Flammability rating according to UL 94V0
Glow wire flammability index GWFI according to EN 60695-2-12850
Glow wire ignition temperature GWIT according to EN 60695-2-13775
Temperature for the ball pressure test according to EN 60695-10-2125 °C

Dimensions
Dimensional drawingzzyynvpzer.jpg
Pitch10.16 mm
Width [w]74.92 mm
Height [h]21.9 mm
Length [l]34.55 mm
Installed height17.8 mm
Solder pin length [P]4.1 mm
Pin dimensions0.8 x 1.2 mm
PCB design
Pin spacing10.16 mm
Hole diameter1.7 mm

Electrical tests
Air clearances and creepage distances
SpecificationIEC 60664-1:2007-04
Insulating material groupI
Comparative tracking index (IEC 60112)CTI 600
Rated insulation voltage (III/3)1000 V
Rated surge voltage (III/3)8 kV
minimum clearance value - non-homogenous field (III/3)8 mm
minimum creepage distance (III/3)12.5 mm
Rated insulation voltage (III/2)1000 V
Rated surge voltage (III/2)8 kV
minimum clearance value - non-homogenous field (III/2)8 mm
minimum creepage distance (III/2)8 mm
Rated insulation voltage (II/2)1000 V
Rated surge voltage (II/2)6 kV
minimum clearance value - non-homogenous field (II/2)5.5 mm
minimum creepage distance (II/2)5.5 mm

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-40 °C ... 100 °C (dependent on the derating curve)
Ambient temperature (storage/transport)-40 °C ... 70 °C
Relative humidity (storage/transport)30 % ... 70 %
Ambient temperature (assembly)-5 °C ... 100 °C

Packaging specifications
Type of packagingpacked in cardboard

Packaging specifications
Type of packagingpacked in cardboard

ETIM for 1702523 Connectors (EC002637)

Feature nameConnector model (EF007495)
Feature valueFixed connector
Feature nameContact type (EF001587)
Feature valueBus
Feature nameNumber of poles (EF001391)
Feature value5
Feature nameNumber of plug-in contact rows (EF006935)
Feature value1
Feature nameModular spacing contacts (EF007326)
Feature value10.16 mm
Feature nameModular spacing connections (EF006827)
Feature value10.16 mm
Feature nameRated current In (EF008250)
Feature value76 A
Feature nameRated voltage (EF000228)
Feature value1000 V
Feature nameRated surge voltage (EF002993)
Feature value8 kV
Feature nameOver voltage category (EF006785)
Feature valueIII
Feature namePollution degree (EF006786)
Feature value2
Feature nameMaterial of contact surface (EF004020)
Feature valueSilver
Feature nameType of electric connection (EF003961)
Feature valueOther
Feature nameDiameter connection pin (EF006823)
Feature value1.7 mm
Feature nameLength pin (EF006825)
Feature value4.1 mm
Feature nameMaterial insulation body (EF007543)
Feature valueOther
Feature nameHousing colour (EF000136)
Feature valueGreen
Feature nameInflammability class of insulation material according to UL94 (EF002521)
Feature valueV0
Feature nameOperating temperature (EF002393)
Feature value-40 °C
Feature nameType of fastening (EF002442)
Feature valueOther
Feature nameType of banding (EF007011)
Feature valueCarton (for SMD)

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.