PHOENIX CONTACT  SM-5EPWN8AA700 1620663 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

SM-5EPWN8AA700 1620663 PHOENIX CONTACT Device connector, front mounting

Reference: SM-5EPWN8AA700

Code: 1620663

Manufacturer: PHOENIX CONTACT

Description:

Device connector, front mounting
Conect. plug. to be apar. front wall, Swivel elbow, for standard and SPEEDCON lock, M40, number of poles: 2+3+PE, contact type: Male, Axial O-ring, 4xØ4.4, shielded: yes, flange size: 40 mm x 40 mm, protection index: IP67, number of poles: 6, connection type: Crimped connection, series: SM
Device connector front mounting, angled rotatable, for standard and SPEEDCON interlock, M40, number of positions: 2+3+PE, contact connection type: Pin, Axial O-ring, 4xØ4,4, shielded: yes, flange dimensions: 40 mm x 40 mm, number of positions: 6, connection method: Crimp connection, series: SM

Categories:

  • Connectors > Circular connector, mounting (without cable)
  • PHOENIX CONTACT > Field Device Connectors (FDC)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • ETIM
  • PDF
  • Reviews
Guarantee, repair and return.

Unit Price: 72,89 €

This price is per unit and is the net value (not including taxes if applicable).

Calculate price by quantity

QuantityPrice

Standard lead time: 2-3 weeks.

  • These delivery times are an estimate any may vary when the item order has been processed.

LAST VIEWED

MORE INFO

Technical data

Notes
Order information:Order crimp contacts 2 x Ø 2 mm, 4 x Ø 3.6 mm separately
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Mounting
Mounting typeFront mounting
Mounting4xØ4,4

Product properties
Product typeCircular connectors (device side)
SeriesSM
ApplicationPower
Number of positions6
Connection profile2+3+PE
Shieldedyes
CodingN
Thread typeM40
Data management status
Article revision11

Dimensions
Housing
Flange dimensions40 mm x 40 mm

Material specifications
Seal materialFPM
Housing materialMetal

Electrical properties
Contact
Contact diameter3.6 mm
Max. current70 A
Nominal voltage UN630 V
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage6 kV
Contact
Contact diameter2 mm
Max. current30 A
Nominal voltage UN250 V
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage4 kV

Connection data
Conductor connection
Connection methodCrimp connection
Contact connection typePin

Connector
Typeangled rotatable
Connection 1
Head designPin

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67
Ambient temperature (operation)-40 °C ... 125 °C
Altitude3000 m

ETIM for 1620663 Connectors (EC002635)

Feature nameContact type (EF001587)
Feature valueOther
Feature nameNumber of data contacts (EF012232)
Feature value0
Feature nameNumber of power contacts (EF012216)
Feature value0
Feature nameNumber of control contacts (EF012217)
Feature value6
Feature nameAmbient temperature (EF002386)
Feature value-40 °C
Feature nameRated voltage (EF000228)
Feature value630 V
Feature nameType of electric connection (EF003961)
Feature valueCrimp connection
Feature nameType of locking (EF000208)
Feature valueOther
Feature nameWith protective conductor (EF007468)
Feature valueNo
Feature nameScreened (EF000881)
Feature valueYes
Feature nameWith status indication (EF001602)
Feature valueNo

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.