PHOENIX CONTACT  MINI MCR-SL-CVS-24-5-10-NC 2902822 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

MINI MCR-SL-CVS-24-5-10-NC 2902822 PHOENIX CONTACT Constant voltage source, input voltage 9.6 30 V DC, outpu..

Reference: MINI MCR-SL-CVS-24-5-10-NC

Code: 2902822

Manufacturer: PHOENIX CONTACT

Description:

Constant voltage source, input voltage 9.6 - 30 V DC, output voltage 10 V, 7.5 V, 5 V, 2.5 V DC, electrically isolated, can be configured via DIP switches, screw connection technology, standard configuration
Constant voltage source, input voltage 9.6-30V DC, output voltage 10V, 7.5V, 5V, 2.5V DC, with galvanic separation, configurable via DIP switch, screw connection technology, standard configuration

Categories:

  • Low-voltage industrial components > Accessories/spare parts for low-voltage switch technology
  • PHOENIX CONTACT > INTERFACE Components (IF)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • ETIM
  • PDF
  • Reviews
Guarantee, repair and return.

Unit Price: 139,60 €

This price is per unit and is the net value (not including taxes if applicable).

Calculate price by quantity

QuantityPrice

Standard lead time: 2-3 weeks.

  • These delivery times are an estimate any may vary when the item order has been processed.

LAST VIEWED

MORE INFO

Product description

The 6.2 mm wide configurable MINI MCR-SL-CVS-24-10-5 constant voltage source is used to generate high precision constant voltages.

The input voltage can fall between 9.6 V DC and 30 V DC.

The DIP switches accessible from the side of the housing enable configuration of the 10 V DC, 5 V DC, 7.5 V DC, and 2.5 V DC output voltages.

The input voltage can be applied either via connection terminal blocks on the modules or in conjunction with the DIN rail connector.

Dimensions

Width6.2 mm
Height93.1 mm
Depth102.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 65 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Degree of protectionIP20

Input data

Voltage input signal9.6 V DC ... 30 V DC

Output data

Configurable/programmableYes, preconfigured
Max. output voltage10 V DC
7.5 V DC
5 V DC
2.5 V DC
Output current≤ 30 mA
Short-circuit currentapprox. 32 mA

Power supply

Nominal supply voltage24 V DC
Supply voltage range9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Max. current consumption< 25 mA (10 V output with 30 mA load at 24 V DC IN)
< 65 mA (10 V output with 30 mA load at 9.6 V DC IN)
< 50 mA (10 V voltage output with 30 mA load at 12 V DC IN)
< 20 mA (10 V voltage output with 30 mA load at 30 V DC IN)
Power consumption< 600 mW (at 24 V IN)
< 624 mW (at 9.6 V IN)
< 564 mW (At 12 V IN)
< 540 mW (at 30 V IN)

Connection data

Connection methodScrew connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section AWG min.26
Conductor cross section AWG max.12
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Stripping length12 mm
Screw threadM3

General

Maximum transmission error≤ 0.1 % (of final value)
≤ 0.5 % (Without adjustment)
Maximum temperature coefficient< 0.01 %/K
Temperature coefficient, typical< 0.002 %/K
Setting range comparison± 300 mV
Electrical isolationBasic insulation according to EN 61010
Overvoltage categoryII
Pollution degree2
Rated insulation voltage50 V AC/DC
Test voltage input/output1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC
Noise emissionEN 61000-6-4
Noise immunityEN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Colorgreen
Housing materialPBT
Mounting positionany
Assembly instructionsThe T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
ConformanceCE-compliant
ATEXEx II 3 G Ex nA IIC T4 Gc X
UL, USA / CanadaUL 508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC
Certificate of classificationDNV GL 14085-15HH

ETIM for 2902822 Low-voltage industrial controls and switchgear (EC002498)

Feature nameType of accessory/spare part (EF000215)
Feature valueOther
Feature nameAccessory (EF013236)
Feature valueYes
Feature nameSpare part (EF013237)
Feature valueNo

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.