Sign in
PHOENIX CONTACT Field Device Connectors (FDC)VC-SD3 1853696 PHOENIX CONTACT Protective covers
PHOENIX CONTACT VC-SD3 1853696 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

VC-SD3 1853696 PHOENIX CONTACT Protective covers

Reference: VC-SD3

Code: 1853696

Manufacturer: PHOENIX CONTACT

Description:

Protective covers
Protective cover, Article family: VARIOCON, construction: VC3, housing material: PA 6, color: gray
Protective cover, Range of articles: VARIOCON, design: VC3, housing material: PA 6, color: gray

Categories:

  • Connectors > Accessories/spare parts for industrial connectors
  • PHOENIX CONTACT > Field Device Connectors (FDC)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • ETIM
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

MORE INFO

Technical data
Notes
Safety note
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• Operate the connector only when it is fully plugged in.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product properties
Product typeProtective cover
Product familyVARIOCON
TypeVC3
Typefor panel mounting frames
Seal presentno
Data management status
Article revision03
Dimensions
Dimensional drawingofldxmrkyj.jpg
Width31 mm
Height10.6 mm
Length86.5 mm
Material specifications
Colorgray
Color of the housing partgray
MaterialPA
Flammability rating according to UL 94V0
Housing materialPA 6
Material, protective coverPA
Mechanical properties
Mechanical data
Locking typeScrew
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP40
IP40
Ambient temperature (operation)-40 °C ... 80 °C
Mounting
Mounting typeClip locking

ETIM for 1853696 Connectors (EC002314)

Feature nameType of locking (EF000208)
Feature valueOther
Feature nameWith sealing (EF005610)
Feature valueNo
Feature nameWith captivity element (EF012222)
Feature valueNo
Feature nameInflammability class of insulation material according to UL94 (EF002521)
Feature valueV0
Feature nameAmbient temperature (EF002386)
Feature value80 °C
Feature nameDegree of protection (IP), mounted (EF007466)
Feature valueIP40

DATASHEET - PDF

Title
Size
Type
PHOENIX CONTACT-1853696-VC-SD3
131 Kbytes
PDF CATALOG PHOENIX CONNECTORS EN
68 Mbytes

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.