Sign in
PHOENIX CONTACT INTERFACE Components (IF)PLC-RSC-48DC/21-21/MS 2910504 PHOENIX CONTACT Relay Module
PHOENIX CONTACT PLC-RSC-48DC/21-21/MS 2910504 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

PLC-RSC-48DC/21-21/MS 2910504 PHOENIX CONTACT Relay Module

Reference: PLC-RSC-48DC/21-21/MS

Code: 2910504

Manufacturer: PHOENIX CONTACT

Description:

Relay Module
PLC-INTERFACE, consisting of socket relay and relay with plug-in power contact with manual activation, integrated status LED and free-flowing diode, Screw connection, 2 switched contacts, Rectifier bridge, Input voltage: 48 VDC

Categories:

  • PHOENIX CONTACT > INTERFACE Components (IF)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • ETIM
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Key Commercial Data

Orderkey2910504
Packing unit10 pc
NoteMade to Order (non-returnable)
GTIN4055626486093
Weight per Piece (excluding packing)67.000 g
Custom tariff number85364190
Country of originDE (Germany)

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width14 mm
Height80 mm
Depth104 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-20 °C ... 85 °C

Coil side

Nominal input voltage UN48 V DC
Typical input current at UN19 mA
Typical response time6 ms
Typical release time10 ms
Protective circuitBridge rectifier
Operating voltage displayyes

Contact side

Contact type2 PDT
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage12 V (10 mA)
Min. switching current10 mA (12 V)
Maximum inrush current12 A (20 ms)
Limiting continuous current6 A
Interrupting rating (ohmic load) max.192 W (24 V DC)
62 W (48 V DC)
42 W (60 V DC)
55 W (110 V DC)
66 W (220 V DC)
2000 VA (250 V AC)
Switching capacity1 A (24 V, DC13)
1.5 A (230 V, AC15)

Connection data input side

Connection nameCoil side
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² ()
2x 0.5 mm² ... 1.5 mm² ()
Conductor cross section AWG26 ... 14

Connection data output side

Connection nameContact side
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² ()
2x 0.5 mm² ... 1.5 mm² ()
Conductor cross section AWG26 ... 14

General

Test voltage relay winding/relay contact4 kVrms(50 Hz, 1 min.)
Test voltage PDT/PDT2.5 kVrms(50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionRT II (Relay)
IP20 (Relay base)
Mechanical service life5x 106cycles
UL, USAUL 508
UL 508 Recognized
UL, USA/CanadacUL 508
cUL 508 Recognized
Mounting positionany
Assembly instructionsIn rows with zero spacing

Standards and Regulations

DesignationStandards/regulations
Standards/regulationsEN 50178
Rated insulation voltage250 V AC
Rated surge voltage6 kV
InsulationSafe isolation, reinforced insulation
Degree of pollution2
Overvoltage categoryIII
Flammability rating according to UL 94V0
UL, USAUL 508
UL 508 Recognized
UL, USA/CanadacUL 508
cUL 508 Recognized

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Articles in set

Classifications

ETIM for 2910504 Relays (EC001437)

Feature nameType of electric connection (EF003961)
Feature valueScrew connection
Feature nameComplete with socket (EF003359)
Feature valueYes
Feature nameWith detachable clamps (EF003340)
Feature valueNo
Feature nameWith LED indication (EF005950)
Feature valueYes
Feature nameRated control supply voltage DC (EF003980)
Feature value40.3 V
Feature nameVoltage type for actuating (EF008242)
Feature valueDC
Feature nameDrive, polarization (EF003355)
Feature valuePolarized
Feature nameDrive, switching attitude (EF003356)
Feature valueMono stable
Feature nameNumber of contacts as normally closed contact (EF008255)
Feature value0
Feature nameNumber of contacts as normally open contact (EF008256)
Feature value0
Feature nameNumber of contacts as change-over contact (EF008257)
Feature value2
Feature nameType of switch contact (EF003358)
Feature valueSingle contact
Feature nameWith forced-guided contacts (EF003357)
Feature valueNo
Feature nameMaterial of contact insert (EF008521)
Feature valueOther
Feature nameMaterial of contact surface (EF004020)
Feature valueUntreated
Feature nameNominal current (EF000001)
Feature value0.019 A
Feature nameDegree of protection (IP) (EF005474)
Feature valueIP20
Feature nameWidth (EF000008)
Feature value14 mm
Feature nameHeight (EF000040)
Feature value80 mm
Feature nameDepth (EF000049)
Feature value104 mm

DATASHEET - PDF

Title
Size
Type
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN
29 Mbytes

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.