ANUNCIAR

USGP1020MP SG-P1020-M-P PANASONIC Door Safety Switch, Cat.4, RFID, Visible Type, Master (Std), Common Code, ..

USGP1020MP

SG-P1020-M-P

PANASONIC

Door Safety Switch, Cat.4, RFID, Visible Type, Master (Std), Common Code, PNP, 5m Cable

SG-P1020-M-P_Non-Contact Safety Door Switch_Non-Contact Safety Door Switch SG-P_Visible type(Low code / Standard)

More details


Safety - PANASONIC

Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC

Total: $279.14
Unit price: $279.14
This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Product NumberSG-P1020-M-P
Part NumberSG-P1020-M-P
ProductNon-Contact Safety Door Switch
DetailsVisible type
(Low code / Standard)
Product nameNon-Contact Safety Door Switch SG-P

ItemSpecifications
Product NumberSG-P1020-M-P
Part NumberSG-P1020-M-P
Applicable standards:International standardISO 13849-1 : 2015 (Category 4, PLe), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), IEC 60947-5-3, ISO 14119
Applicable standards:JapanJIS B 9705-1, JIS C 0508-1 to 3 (SIL3), JIS B 9961, JIS C 8201-5-2, JIS B 9710
Applicable standards:EuropeEN ISO 13849-1 : 2015 (Category 4, PLe), EN ISO 14119, EN 60947-5-3, EN 300 330, EN IEC 63000, EN 301 489-1
Applicable standards:North AmericaCAN/CSA C22.2 No.14, UL508
Applicable regulations and certificationsCE Marking (Machinery Directive, RE Directive, RoHS Directive), UKCA Marking (Supply of Machinery (Safety) Regulations, RE Regulations, RoHS Regulations), TÜV SÜD certification, TÜV SÜD certification (U.S.A., Canada), the U.S.'s radio regulations (FCC) (Note), Canada's radio regulations (ICES-003, RSS-310) (Note), Singapore's radio regulations (IMDA certification) (Note), Thailand's radio regulations (NBTC certification) (Note), Philippines' radio regulations (NTC certification) (Note), Korea's radio regulations (KC certification) (Note), India's radio regulations (WPC certification) (Note)
(Note) : This product uses a weak radio signal for its detection operation. Please confirm compliance with applicable laws in the country of use.
Operating distance : Front / SideSao (OFF→ON): 5 mm 0.197 in, Sar (ON → OFF): 15 mm 0.591 in
Power voltage24V DC+10-20% Ripple P-P 10 % or less
Current consumption30 mA or less
Control outputs (OSSD 1, OSSD 2)PNP open-collector transistor 2 outputs
• Maximum source current: 100 mA
• Applied voltage: Same as the power supply voltage (PNP output: between control output and +V)
• Residual voltage: 2 V or less (source current and sink current: 100 mA) (excluding voltage drop due to cable)
• Leakage current: 0.2 mA or less (including power OFF state)
• Maximum load capacity: 0.47 μF
• Load wiring resistance: 3 Ω or less
Control outputs (OSSD 1, OSSD 2):Operation mode• When the actuator is detected (safe state): ON
• When the actuator is not detected (unsafe state or lockout state): OFF
• When the switch body (sub) does not detect actuator (series connection): OFF
Control output(OSSD):Protection circuitIncorporated
Response time• For single unit: ON→OFF 100 ms or less, OFF→ON 100 ms or less
• For multiple units: Time for single unit + 5 ms x (number of connected units - 1)
Check input and outputDedicated communication line between the switch body (standard) and the switch body (sub) (Note)
* It is not for external input and output. (voltage range 0 V to 5 V DC)
(Note) : When using the device as a single unit, connect the check input with the check output.
Number of units connected in series30 units or less (standard 1 unit, sub 29 units)
Pollution degree3
Environmental resistance:Degree of protectionIP65(IEC)
Environmental resistance:Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +65 ℃ -13 to +149 ℉
Environmental resistance:Ambient humidity30 to 85 % RH, storage: 30 to 95 % RH
Environmental resistance:Voltage withstandability1,000 V AC for one minute between all supply terminals connected together and enclosure
Environmental resistance:Insulation resistance20 MΩ or more, with 500 V DC megger between all supply terminals connected together and enclosure
Environmental resistance:Vibration resistance10 to 55Hz, 1 mm double amplitude, 2 hours each in X, Y, and Z directions
Environmental resistance:Shock resistance300 m/s2 (approx. 30 G), 3 times each in X, Y, and Z direction
MaterialSwitch body: PBT, PC, SUS (stainless steel), EPDM
Actuator: PBT, PC
Cable6–core cabtyre cable, 5 m 16.404 ft long
Connected cable length• When using only one unit: Maximum cable length of 20 m 65.617 ft between switch body and power supply unit
• When connecting multiple units in series: Maximum total cable length of 100 m 328.084 ft, maximum cable length of 20 m 65.617 ft between two adjacent units
WeightSwitch body (standard): 180 g approx., Actuator : 20 g approx.
Gross weight270 g approx.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were ambient temperature +23 ℃ +73 ℉.

■Transponder specifications
Operating frequency: 125 kHz
Max. transmitter output: 3.33 μW

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.