Product successfully added to your shopping cart
HLT1005A
HL-T1005A
PANASONIC
1
HL-T1 sensor heads, 5 mm type
Laser Sensors - Spot Type - AN - PANASONIC > HL-T1 Controller - PANASONIC
* Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Product Number | HL-T1005A |
Part Number | HL-T1005A |
Product | Ultra-compact Laser Collimated Beam Sensor |
Details | Sensor head (Sensing width 5 mm0.197 intype) |
Product name | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
Item | Specifications |
---|---|
Product Number | HL-T1005A |
Part Number | HL-T1005A |
Type | Sensing width 5 mm0.197 intype |
CE marking directive compliance | EMC Directive, RoHS Directive |
Applicable controller | HL-AC1, HL-AC1P |
Sensing range | ■■【In the case of(0 to 500 mm 0to 19.685 in)】■■ Sensing width: ø1 mmø0.039 in Min. sensing object: ø8 micro mø0.315 milopaque object Repeatability (During the state in which light is half blocked): 4 micro m0.157 mil (Note:In case of an average sampling rate of 64 times.) Linear output resolution: 4 micro m0.157 mil (Note) In case of an average sampling rate of 64 times. (Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width. (Note:This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mmø0.039 in.) ■■【In the case of (500 to 2,000 mm19.685 to 78.74 in)】■■ Sensing width: ø1 to ø2.5 mmø0.039 to ø0.098 in Min. sensing object: ø50 micro mø1.969 milopaque object Repeatability (During the state in which light is half blocked): - Linear output resolution: - - |
Emission indicator | Green LED (lights up during laser emission) |
Interference prevention function | Two units of sensors can be mounted close together. (When the controller interference prevention function is used) |
Pollution degree | 3 (industrial environment) |
Environmental resistance : Ambient temperature | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉ |
Environmental resistance : Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Environmental resistance : Ambient illuminance | Incandescent light: 10,000 liter x or less at the light-receiving face |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Environmental resistance : Vibration resistance | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
Environmental resistance : Shock resistance | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
Emitting element : IEC / JIS standards conforming type | Red semiconductor laser Class 1 (IEC / JIS) (modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm0.026 mil) |
Emitting element : FDA regulations conforming type | Red semiconductor laser Class II (FDA) (modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm0.026 mil) (IEC / JIS: Class 1) |
Material | Enclosure: Polyetherimide Case cover: Polycarbonate Front cover: Glass |
Cable | 0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong |
Cable extension | Extension up to total 10 m32.808 ftis possible, with the optional cable. |
Weight | Emitter: 15 g approx. Receiver: 15 g approx. |
Accessory | MS-HLT1-1(Sensor head mounting bracket): One set of two brackets for both the emitter and the receiver CN-HLT1-1(Sensor head to controller connection cable): 1 cable Laser beam alignment sticker: 2 pcs. Label set (FDA regulations conformed type only): 1 set |
Title: | Size: | Type: |
---|---|---|
Datasheet 1: HLT1005A - HLT1005A | HL-T1005A | 1 Mbytes | |
Download general catalog |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.