Product successfully added to your shopping cart
FX-551
PANASONIC
1
Fiber amplifier, NPN, 1 digital output, double display, connector type
Fiber - PANASONIC > FX500 high performance digital fiber sensor - PANASONIC
* Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Product Number | FX-551 |
Part Number | FX-551 |
Product | Digital Fiber Sensor |
Details | Amplifiers Connector type |
Product name | Digital Fiber Sensor FX-550 |
Item | Specifications |
---|---|
Product Number | FX-551 |
Part Number | FX-551 |
CE marking directive compliance | EMC Directive, RoHS Directive |
Supply voltage | 12 to 24 V DC+10-15% Ripple P-P 10 % or less |
Power consumption | Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
Output | <NPN output type> NPN open-collector transistor ・Maximum sink current : 100 mA ・Applied voltage : 30 V DC or less (between output and 0 V) ・Residual voltage : 2 V or less (Note) (at maximum sink current) (Note): In case of using the quick-connection cable (cable length 5 m16.404 ft)(optional). |
Output:Output operation | Switchable either Light-ON or Dark-ON by L/D mode |
Output:Short-circuit protection | Incorporated |
Response time | FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable |
Sensitivity setting | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
Incident light sensitivity setting | Incorporated, 4 steps |
Incident light intensity display range | FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999 |
Timer function | Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective |
Timer function:Timer period | Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx., Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx. (Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms. |
Different frequency interference prevention function | Incorporated (up to 4 units). Note that the response time varies depending on the setting. F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less (Note): This function increases the hysteresis. Check the sensing condition when using the function. |
Protection | IP40(IEC) |
Ambient temperature | -10 to +55 ℃+14 to +131 ℉(If 4 to 7 units are mounted in cascade : -10 to +50 ℃+14 to +122 ℉or if 8 to 16 units are mounted in cascade : -10 to +45 ℃+14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃-4 to +158 ℉ |
Emitting element (modulated) | Red LED (Peak emission wavelength : 660 nm0.026 mil) |
Material | Enclosure, Case cover : Polycarbonate, Switch : Polyacetal |
Cable | - |
Cable extension | - |
Weight | Net weight : 15 g approx., Gross weight : 55 g approx. |
Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉. |
Title: | Type: | |
---|---|---|
Download general catalog |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.