No products
Product successfully added to your shopping cart
UEXF1 EXF1 EX-F1 PANASONIC Pipe mountable liquid level sensor, NPN, 12-24 V DC
UEXF1
EXF1
EX-F1
PANASONIC
Pipe mountable liquid level sensor, NPN, 12-24 V DC
Sensor for liquid level in transparent tubes, between 6 and 13mm Ø, built-in amplifier, NPN, selectable Light-On/Dark-ON, 12-24 V DC
Special Photoelectric Sensors - PANASONIC > EX-F1 Pipe-mountable Liquid Level Detection Sensor - PANASONIC
Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC
Best sellers
▲More info
▲| Product Number | EX-F1 |
| Part Number | EX-F1 |
| Product | Pipe-mountable Liquid Level Detection Sensor |
| Details | Amplifier built-in, Pipe-mountable |
| Product name | Pipe-mountable Liquid Level Detection Sensor EX-F1 |
| Item | Specifications |
|---|---|
| Product Number | EX-F1 |
| Part Number | EX-F1 |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Sensing object | Liquid (Note):Unclear or highly viscous liquid may not be detected stably. |
| Applicable pipe diameter | Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note：Do not use the sensor with pipes other than the above specified.) |
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Current consumption | 30 mA or less (Note：Unclear or highly viscous liquid may not be detected stably.) |
| Output | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Output:Output operation | Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON) |
| Output:Short-circuit protection | Incorporated |
| Response time | 2 ms or less |
| Operation indicator | Red LED (lights up when the output is ON) |
| Ambient temperature | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃-4 to +158 ℉ (Note：Liquid being detected should also be kept within the rated ambient temperature range.) |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance | lncandescent light: 3,000 lx or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Emitting element | Infrared LED (modulated) |
| Material | Enclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone |
| Cable | 0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long |
| Cable extension | Extension up to total 50 m164.042 ftis possible with 0.3 mm2, or more, cable. |
| Weight | Net weight: 15 g approx., Gross weight: 60 g approx. |
| Accessory | Tying band: 2 pcs., Anti-slip tube: 2 pcs. |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOGUE PANASONIC EN .pdf | 15 Mbytes |
|
| Download general catalog |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.