No products
Product successfully added to your shopping cart
View larger
AFP0HCCM1 PANASONIC Communication cassette with 1 x RS485 (3 pin)
AFP0HCCM1
PANASONIC
Communication cassette with 1 x RS485 (3 pin)
FP0H Communication Cassette. 1 Port R485
AFP0HCCM1_FP0H communication cassettes
FP0R / FP-SIGMA / FP-X /FP-X0 Programmable controllers - PANASONIC
Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC
Often bought together
▲Best sellers
▲More info
▲| Product Number | AFP0HCCM1 |
| Part Number | AFP0HCCM1 |
| Product name | FP0H communication cassettes |
| Item | Specifications |
|---|---|
| Product Number | AFP0HCCM1 |
| Part Number | AFP0HCCM1 |
| Interface | RS-485 1 channel |
| Transmission distance | Max. 1,200 m 3,937.008 ft |
| Communication configuration | 1 : N communication |
| Communication speed | 1,200(Note), 2,400(Note), 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec. (Note): System register no. 415 cannot be used to set the baud rate to 1,200 bps. To set the baud rate to 1,200 bps, use the SYS1 instruction. If the baud rate of any of the COM ports is 2,400 bps or lower, F-ROM access will slow down. Example) F12(ICRD) instruction, P13(ICWT) instruction, etc. |
| Communication method | Half-duplex system |
| Synchronous method | Start-stop synchronization system |
| Transmission format : Data length | 7 bits / 8 bits |
| Transmission format : Parity | none / odd / even |
| Transmission format : Stop bit | 1 bit / 2 bits |
| Transmission format : Start code | with STX / without STX |
| Transmission format : End code | CR / CR + LF / none / ETX / Time (0 to 100 ms) |
| Data transmission order | Transmit from bit 0 in character units. |
| Number of stations | Max. 99 units |
| Net weight | 10 g approx. |
| Remark | Notes: 1) The start and end codes can be used only for general-purpose serial communications. 2) The unit No. (station number) can be selected at system register. 3) Sufficient noise tolerance is provided but it is recommended that a user program be created for retransmission. (To improve the reliability of communications when a communication error occurs due to an excessive noise or when the target device cannot receive data temporarily.) 4) When connecting a commercially available device that has an RS-485 interface, please confirm operation using the actual device. In some cases, the number of station units, transmission distance and communication speed vary depending on the connected device. 5) The transmission distance, transmission speed, and number of stations should be within the range of the graph below, depending on each value.  When the transmission speed is 19,200 bits/s, you can set up to 99 stations and up to 1,200 m 3,937.008 ft transmission distance. |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PANASONIC PROGRAMMABLE LOGIC CONTROLLERS EN.pdf | 6 Mbytes |
|
| PDF CATALOGUE PANASONIC EN .pdf | 15 Mbytes |
|
| Data sheet AFP0HCCM1 PANASONIC FP0H communication cassettes | 3 Mbytes |
|
| Download general catalog |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.