A22-FG 160890 OMRON Industrial Career Final / Push buttons, round head green flush View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

A22-FG 160890 OMRON Industrial Career Final / Push buttons, round head green flush

A22-FG

160890

OMRON

Available

Ship on today

Industrial Career Final / Push buttons, round head green flush

More details


Safety

A22

* Brand new product in its original packaging covered by the warranties and certifications provided by OMRON

*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



A22 Standard pushbutton switches
22 mm pushbutton switch
A22 comes in a wide variety of shapes and colors and is installable in 22-dia. or
25-dia. panel cutouts. The switch unit can easily be mounted.A22 is mounted using either open-type (fork-type) or closed-type (round-type) crimp terminals.
• Finger-protection mechanism on switch unit provided as standard feature
• Increased wiring efficiency with three-rowmountingof switch blocks
• IP65 oil-resistant(non-lightedmodels), IP65 (lighted models)
• Lighted and non-lighted, flat, projection and half- and full-guard versions
• EN60947-5-1, UL andcUL approved
Ordering information
Pushbutton
Illumination ColorOrder code
Flat type Projection type Full-guard type Half-guard typeSquare/
projection type
Square/
full-guard type
Round/ mushroom type (30-dia. head)
Round/ mushroom type (40-dia. head)
Non-lightedRedA22-FRA22-TRA22-GR A22-HRA22-CRA22-DRA22-SRA22-MR GreenA22-FG A22-TG A22-TG A22-HG A22-CG A22-DG A22-SGA22-MG Yellow A22-FYA22-TYA22-GY A22-HY A22-CYA22-DYA22-SY A22-MY WhiteA22-FWA22-TWA22-GWA22-HWA22-CWA22-DWA22-SW A22-MW BlueA22-FA A22-TAA22-GAA22-HA A22-CAA22-DA A22-SAA22-MA Black A22-FB A22-TB A22-GB A22-HBA22-CBA22-DB A22-SBA22-MB
LightedRed– A22L-TRA22L-GRA22L-HR A22L-CR A22L-DR– – Green– A22L-TG A22L-GG A22L-HGA22L-CGA22L-DG– – Yellow – A22L-TY A22L-GYA22L-HY A22L-CY A22L-DY – – White– A22L-TWA22L-GWA22L-HW A22L-CW A22L-DW– – Blue – A22L-TAA22L-GA A22L-HA A22L-CAA22L-DA– –
Buttonsize in mm 29.7 dia. × 12D 29.7 dia. × 19D 29.7 dia. × 19D29.7 dia. × 12/18.5D 29.8 mm2 × 18D 29.8 mm2 × 18D30 dia. × 32D40 dia. × 32D
Switches
Switch operation
Contacts Oder code
Non- lighted models
Lighted models
Lamp – LED
AC/DCLED lightOrder code
Operating voltage
6 V12 V24 V24 V
superbright
Without voltage reduction unit
With voltage reduction unit
110 VAC220 VAC
DC RedA22-6DR––– GreenA22-6DG –––
Yellow *1
A22-6DY –––
Momentary SPST-NO A22-10MA22L-10M A22L-10M-T1A22L-10M-T2
SPST-NCA22-01MA22L-01M A22L-01M-T1A22L-01M-T2
Blue A22-6DA ––– AC Red A22-6AR––– GreenA22-6AG –––
Yellow *1A22-6AY –––
SPST-NO +
SPST-NC
A22-11M A22L-11M A22L-11M-T1A22L-11M-T2
Blue A22-6AA –––
DPST-NO A22-20MA22L-20M A22L-20M-T1A22L-20M-T2
DPST-NC A22-02MA22L-02M A22L-02M-T1A22L-02M-T2
Alternate SPST-NOA22-10A A22L-10A A22L-10A-T1A22L-10A-T2
SPST-NCA22-01A A22L-01A A22L-01A-T1A22L-01A-T2
AC and DC Red –A22-12ARA22-24AR A22-24ASR
Green–A22-12AGA22-24AGA22-24ASG Yellow *1–A22-12AYA22-24AY A22-24ASY Blue –A22-12AAA22-24AAA22-24ASA
SPST-NO + SPST-NC
A22-11A A22L-11A A22L-11A-T1 A22L-11A-T2
*1Used when the pushbutton color is yellow or white
DPST-NO A22-20A A22L-20A A22L-20A-T1 A22L-20A-T2
DPST-NC A22-02A A22L-02A A22L-02A-T1A22L-02A-T2
Switch blocks
Standard load Order code
Switch blocks SPST-NOA22-10
SPST-NC A22-01
DPST-NO A22-20
DPST-NCA22-02
Lamp - incandescent lamp
Order code
Operating voltage
5 VAC/VDC12 VAC/VDC24 VAC/VDC
A22-5A22-12 A22-24
409
A22 Standard pushbutton switches
Accessories
Item Remarks Order code
Lamp socketsDirect lighting Used when changing the lighting method (LED only)A22-TN Voltage-reduction lighting 220 VAC A22-T2
Mounting latches
For momentary modelsOrder mounting latches only when mounting switch blocks or lamp sockets are purchased individually
A22-3200
Legend plate frames
Large sizeWith snap-in legend plate, without text, blackSnap-in legend plate is acrylic A22Z-3333
Without snap-in legend plate A22Z-3330
Sealing capsFor projection modelsUsed to prevent dust or water from entering the operation unit (pushbutton, etc.), color: Opaque, material: Silicon
A22Z-3600T
Three-throw spacerUsed when mounting three non-lighted switchesA22Z-3003
Control boxes
Exclusively for A22 One hole Do not use DPST-NO or DPST-NC switches,
A22Z-B101
(enclosures)
Two holes
material: Polycarbonate resin
A22Z-B102
Three holes A22Z-B103
Snap-in legend Standard sizeWithout textWhite Attached to the standard-size legend plate frame,
A22Z-3443W
plates
Transparent
material: Acrylic
A22Z-3443C
White text on black backgroundON A22Z-3443B-5
OFF A22Z-3443B-6
DOWNA22Z-3443B-8
POWER ONA22Z-3443B-9
Large sizeWithout textWhite Attached to the large-size legend plate frame,
A22Z-3453W
Transparent
material: Acrylic
A22Z-3453C
For emergency
60-dia. round plate with black letters on a yellow background“EMERGENCY STOP” is engraved on the plate.
A22Z-3466-1
stop switch
90-dia. round plate with black letters on a yellow background
Used as an emergency stop switch legend plate
A22Z-3476-1
Lamp extractorRubber tool used to easily replace lampsA22Z-3901
Tightening wrench Tool used to tighten nuts from the back of the panelA22Z-3905
Specifications
Recognized organizationStandardsFile number
UL, cULUL508E41515
– EN60947-5-1 –
Contact ratings (standard load)
LED indicators without voltage reduction unit
Rated voltageRated current Operating voltage
6 VDC 60 mA (20 mA) 6 VDC ±5%
6 VAC60 mA (20 mA) 6 VAC/VDC ±5%
12 VAC/VDC 30 mA (10 mA) 12 VAC/VDC ±5%
Rated carry
Rated voltage Rated current (A)
current (A)
AC15 (inductive load)
AC12 (resistive load)
DC13 (inductive load)
DC12 (resistive load)
24 VAC/VDC 15 mA (10 mA) 24 VAC/VDC ±5%
Super-bright LED indicator
10 24 VAC1010––
110 VAC510––
220 VAC36––
380 VAC23––
440 VAC12––
24 VDC ––1,5 10
110 VDC ––0,5 2
220 VDC ––0,2 0,6
380 VDC ––0,1 0,2
Contacts (microload)
Rated applicable load Minimum applicable load
50 mA at 5 VDC (resistive load) 1 mA at 5 VDC
Rated voltageRated current Operating voltage
24 VAC/VDC 15 mA 24 VAC/VDC ±5%
Incandescent lamp
Rated voltageRated current Operating voltage
6 VAC/VDC200 mA5 VAC/VDC
14 VAC/VDC 80 mA12 VAC/VDC
28 VAC/VDC 40 mA24 VAC/VDC
130 VAC/VDC 20 mA100 VAC/VDC
Voltage-reduction lighting
Rated voltageOperating voltageApplicable lamp
(BA8S/13_ gold)
110 VAC95 to 115VACLED Lamp (A22-24A_)
220 VAC190 to 230 VAC
ItemPushbutton switches Emergency stop switches Knob-type selector switches Key-type selector switch
Non-lightedLighted Non-lightedLighted Non-lighted LightedNon-lighted
Allowable operating
Mechanical Momentary operation:
60 operations/minute max.
30 operations/minute max.Manual release: 30 operations/minute max., automatic release: 30 operations/minute max.
frequency
Electrical 30 operations/minutemax.30 operations/minute max.
Durability
(number of
Mechanical Momentary operation:
5,000,000
Momentary operation: 300,000 500,000 100,000 500,000
operations min.)
Ambient temperature
Electrical500,000 300,000 500,000 100,000 500,000
Operating –20 to 70°C–20 to 55°C–20 to 70°C–20 to 55°C –20 to 70°C–20 to 55°C–20 to 70°C
Storage –40 to 70°C–40 to 70°C–40 to 70°C–40 to 70°C –40 to 70°C–40 to 70°C–40 to 70°C
Degree of protection IP65
(oil-resistant)
IP65IP65
(oil-resistant)
IP65IP65 (oil-resistant)IP65IP65 (oil-resistant)
Size in mm (in-panel only) 34H × 34W × 54.7D, 34H × 34W × 72.7D for DPST switches
410

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.