A22-20 160872 OMRON Industrial Career Final / Push Block contacts 2NA View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

A22-20 160872 OMRON Industrial Career Final / Push Block contacts 2NA




Available Ship on today

Industrial Career Final / Push Block contacts 2NA

More details



* Brand new product in its original packaging covered by the warranties and certifications provided by OMRON

*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info

A22 Standard pushbutton switches
22 mm pushbutton switch
A22 comes in a wide variety of shapes and colors and is installable in 22-dia. or
25-dia. panel cutouts. The switch unit can easily be mounted. A22 is mounted using either open-type (fork-type) or closed-type (round-type) crimp terminals.
• Finger-protection mechanism on switch unit provided as standard feature
• Increased wiring efficiency with three-row mounting of switch blocks
• IP65 oil-resistant (non-lighted models), IP65 (lighted models)
• Lighted and non-lighted, flat, projection and half- and full-guard versions
• EN60947-5-1, UL and cUL approved
Ordering information
Illumination Color Order code
Flat type Projection type Full-guard type Half-guard type Square/
projection type
full-guard type
Round/ mushroom type (30-dia. head)
Round/ mushroom type (40-dia. head)
Non-lighted Red A22-FR A22-TR A22-GR A22-HR A22-CR A22-DR A22-SR A22-MR Green A22-FG A22-TG A22-TG A22-HG A22-CG A22-DG A22-SG A22-MG Yellow A22-FY A22-TY A22-GY A22-HY A22-CY A22-DY A22-SY A22-MY White A22-FW A22-TW A22-GW A22-HW A22-CW A22-DW A22-SW A22-MW Blue A22-FA A22-TA A22-GA A22-HA A22-CA A22-DA A22-SA A22-MA Black A22-FB A22-TB A22-GB A22-HB A22-CB A22-DB A22-SB A22-MB
Lighted Red – A22L-TR A22L-GR A22L-HR A22L-CR A22L-DR – – Green – A22L-TG A22L-GG A22L-HG A22L-CG A22L-DG – – Yellow – A22L-TY A22L-GY A22L-HY A22L-CY A22L-DY – – White – A22L-TW A22L-GW A22L-HW A22L-CW A22L-DW – – Blue – A22L-TA A22L-GA A22L-HA A22L-CA A22L-DA – –
Buttonsize in mm 29.7 dia. × 12D 29.7 dia. × 19D 29.7 dia. × 19D 29.7 dia. × 12/18.5D 29.8 mm2 × 18D 29.8 mm2 × 18D 30 dia. × 32D 40 dia. × 32D
Switch operation
Contacts Oder code
Non- lighted models
Lighted models
Lamp – LED
AC/DC LED light Order code
Operating voltage
6 V 12 V 24 V 24 V
Without voltage reduction unit
With voltage reduction unit
110 VAC 220 VAC
DC Red A22-6DR – – – Green A22-6DG – – –
Yellow *1
A22-6DY – – –
Momentary SPST-NO A22-10M A22L-10M A22L-10M-T1 A22L-10M-T2
SPST-NC A22-01M A22L-01M A22L-01M-T1 A22L-01M-T2
Blue A22-6DA – – – AC Red A22-6AR – – – Green A22-6AG – – –
Yellow *1 A22-6AY – – –
A22-11M A22L-11M A22L-11M-T1 A22L-11M-T2
Blue A22-6AA – – –
DPST-NO A22-20M A22L-20M A22L-20M-T1 A22L-20M-T2
DPST-NC A22-02M A22L-02M A22L-02M-T1 A22L-02M-T2
Alternate SPST-NO A22-10A A22L-10A A22L-10A-T1 A22L-10A-T2
SPST-NC A22-01A A22L-01A A22L-01A-T1 A22L-01A-T2
AC and DC Red – A22-12AR A22-24AR A22-24ASR
Green – A22-12AG A22-24AG A22-24ASG Yellow *1 – A22-12AY A22-24AY A22-24ASY Blue – A22-12AA A22-24AA A22-24ASA
A22-11A A22L-11A A22L-11A-T1 A22L-11A-T2
*1 Used when the pushbutton color is yellow or white
DPST-NO A22-20A A22L-20A A22L-20A-T1 A22L-20A-T2
DPST-NC A22-02A A22L-02A A22L-02A-T1 A22L-02A-T2
Switch blocks
Standard load Order code
Switch blocks SPST-NO A22-10
SPST-NC A22-01
DPST-NO A22-20
DPST-NC A22-02
Lamp - incandescent lamp
Order code
Operating voltage
A22-5 A22-12 A22-24
A22 Standard pushbutton switches
Item Remarks Order code
Lamp sockets Direct lighting Used when changing the lighting method (LED only) A22-TN Voltage-reduction lighting 220 VAC A22-T2
Mounting latches
For momentary models Order mounting latches only when mounting switch blocks or lamp sockets are purchased individually
Legend plate frames
Large size With snap-in legend plate, without text, black Snap-in legend plate is acrylic A22Z-3333
Without snap-in legend plate A22Z-3330
Sealing caps For projection models Used to prevent dust or water from entering the operation unit (pushbutton, etc.), color: Opaque, material: Silicon
Three-throw spacer Used when mounting three non-lighted switches A22Z-3003
Control boxes
Exclusively for A22 One hole Do not use DPST-NO or DPST-NC switches,
Two holes
material: Polycarbonate resin
Three holes A22Z-B103
Snap-in legend Standard size Without text White Attached to the standard-size legend plate frame,
material: Acrylic
White text on black background ON A22Z-3443B-5
OFF A22Z-3443B-6
DOWN A22Z-3443B-8
POWER ON A22Z-3443B-9
Large size Without text White Attached to the large-size legend plate frame,
material: Acrylic
For emergency
60-dia. round plate with black letters on a yellow background “EMERGENCY STOP” is engraved on the plate.
stop switch
90-dia. round plate with black letters on a yellow background
Used as an emergency stop switch legend plate
Lamp extractor Rubber tool used to easily replace lamps A22Z-3901
Tightening wrench Tool used to tighten nuts from the back of the panel A22Z-3905
Recognized organization Standards File number
UL, cUL UL508 E41515
– EN60947-5-1 –
Contact ratings (standard load)
LED indicators without voltage reduction unit
Rated voltage Rated current Operating voltage
6 VDC 60 mA (20 mA) 6 VDC ±5%
6 VAC 60 mA (20 mA) 6 VAC/VDC ±5%
12 VAC/VDC 30 mA (10 mA) 12 VAC/VDC ±5%
Rated carry
Rated voltage Rated current (A)
current (A)
AC15 (inductive load)
AC12 (resistive load)
DC13 (inductive load)
DC12 (resistive load)
24 VAC/VDC 15 mA (10 mA) 24 VAC/VDC ±5%
Super-bright LED indicator
10 24 VAC 10 10 – –
110 VAC 5 10 – –
220 VAC 3 6 – –
380 VAC 2 3 – –
440 VAC 1 2 – –
24 VDC – – 1,5 10
110 VDC – – 0,5 2
220 VDC – – 0,2 0,6
380 VDC – – 0,1 0,2
Contacts (microload)
Rated applicable load Minimum applicable load
50 mA at 5 VDC (resistive load) 1 mA at 5 VDC
Rated voltage Rated current Operating voltage
24 VAC/VDC 15 mA 24 VAC/VDC ±5%
Incandescent lamp
Rated voltage Rated current Operating voltage
6 VAC/VDC 200 mA 5 VAC/VDC
14 VAC/VDC 80 mA 12 VAC/VDC
28 VAC/VDC 40 mA 24 VAC/VDC
130 VAC/VDC 20 mA 100 VAC/VDC
Voltage-reduction lighting
Rated voltage Operating voltage Applicable lamp
(BA8S/13_ gold)
110 VAC 95 to 115 VAC LED Lamp (A22-24A_)
220 VAC 190 to 230 VAC
Item Pushbutton switches Emergency stop switches Knob-type selector switches Key-type selector switch
Non-lighted Lighted Non-lighted Lighted Non-lighted Lighted Non-lighted
Allowable operating
Mechanical Momentary operation:
60 operations/minute max.
30 operations/minute max. Manual release: 30 operations/minute max., automatic release: 30 operations/minute max.
Electrical 30 operations/minute max. 30 operations/minute max.
(number of
Mechanical Momentary operation:
Momentary operation: 300,000 500,000 100,000 500,000
operations min.)
Ambient temperature
Electrical 500,000 300,000 500,000 100,000 500,000
Operating –20 to 70°C –20 to 55°C –20 to 70°C –20 to 55°C –20 to 70°C –20 to 55°C –20 to 70°C
Storage –40 to 70°C –40 to 70°C –40 to 70°C –40 to 70°C –40 to 70°C –40 to 70°C –40 to 70°C
Degree of protection IP65
IP65 IP65
IP65 IP65 (oil-resistant) IP65 IP65 (oil-resistant)
Size in mm (in-panel only) 34H × 34W × 54.7D, 34H × 34W × 72.7D for DPST switches

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.