S82Y-TS01 154754 OMRON Support batteries for S8TS

S8T-DCBU-01/-02DC Backup
S8T-DCBU-01
The S8T-DCBU-01 battery backup block supplies 24 VDC for a fixed period of time dur- ing AC input outages to considerably improve system reliability.
• Supplies 24 VDC for a long period of time during AC input outages
• For system reliability improvement
• Block power supply basic block is connected by the bus line connector
• Simple system configuration
• Alarms indicated on main unit and via alarm signal output
Ordering information
Product Input voltageOutput voltage Output current Order code
DC back-up block24 to 28 VDC24 V3.7 A/8 A S8T-DCBU-01
Battery holder – – – S82Y-TS01
Product Input voltageOutput voltage Output current Type Order code
Basic block
(use together with the DC
back-up block)
100 to 240 VAC24 V2.5 A Screw terminal type
Connector terminal type
With bus line connectorsS8TS-06024-E1
Without bus line connectors S8TS-06024
With bus line connectorsS8TS-06024F-E1
Without bus line connectors S8TS-06024F
Product Back-up timeOvercurrent protection operating point selector
Order code
Battery 8 min./3.7A 5.7 A (typ.) – LC-R122R2PG
4 min./8.0A 5.7 A (typ.) 11.7A (typ.) LC-R123R4PG
Note:The S8TS DC back-up block is for S8TS power supplies only.
Specifications
ItemSize in mm (HxWxD) S8T-DCBU-01 120x43x130
Battery holder 82x185.7x222.25
S8T-DCBU-02
Prevents equipmentstoppage, data loss and other problems resulting from
momentary power failures. One S8T-DCBU-02 buffer block provides a back-up time of
500 ms at an output current of 2.5 A. Can be wiredto the24 VDC output from any switch mode power supply.
• Connects to all Omron power supplies: S8TS, S8VS, S82J, S82K, S8VM, S8PE
• Connects to both single-phase and three-phase power supplies
• Connects to an S8TS powersupplyvia an S8T-BUS03 buslineconnector
• Parallel connection up to 4 units to increase back-up time and capacity
• Complies with Semi F47-0200 standard
Ordering information
Input voltageOutput voltage (during back-up operation) Output currentOrder code
24 VDC (24 to 28 VDC)22.5 V 2.5 A S8T-DCBU-02
Accessories
TypeNumber of connectorsOrder code
DC bus line connector (for use with S8TS only) 1 connector S8T-BUS03
10 connectors S8T-BUS13
Specifications
ItemSize in mm (H×W×D) S8T-DCBU-02 120×43×120
551