R99-04 FOR G5F RELY2054D R9904WKANAGUFORG5F OMRON Accessory G7J-clamp W

G7J Industrial high power relays
High capacity, high dielectric strength
4 pole power relay
G7J series developed for switching resistive, inductive as well as motor loads.
No contact chattering for momentary voltage drops up to 50% of rated voltage.
High dielectric strength(4KV) betweencoil and contactsas well as betweendifferent polarity contacts.
•25 A Rated current
•4PST-NO, 3PST-NO / SPST-NC or DPST-NO / DPST-NC
• Bifurcated contacts optional
• Terminals: Screw, Quick-connect or PCB pins
• Mounting by insertion into a clip or just by screws (flange type)
Ordering information
Contact formMountingTerminal Order code *1
Common coil voltages *2
PCB W-bracket mounting
PCB Quick-connectScrew
( __ _= coil voltage + AC/DC)
DC AC
4PST-NOyes no yesno no G7J-4A-P___12, 24 200/240 no yes no yesG7J-4A-B__ _ 24 –
yesno G7J-4A-T___12, 24 200/240
3PST-NO/SPST-NC yes no yesno G7J-3A1B-P__ _ 24 –
no yes no yesG7J-3A1B-B__ _ 24 –
DPST-NO/SPST-NC yesno G7J-3A1B-T___24 200/240
DPST-NO/DPST-NCyes no yesno G7J-2A2B-P__ _ 24 –
*1For other options like bifurcated contacts, please see specifications.
*2Other coil voltages available. Please see specifications.
Accessories
For typeOrder code
W-bracket
G7J Screw terminaltypeR99-04 for G5F G7J Quick Connect type
Specifications
Coil ratings
Rated voltage Must operate voltage
Must release voltage Max. voltagePower consumption (approx.)
% of rated voltage
AC 24, 50, 100 to 120, 200 to 240 75% max.15% min. 110%1.8 to 2.6 VA
DC 6, 12, 24, 48, 10010% min.2.0 W
Contact ratings
Item 4-pole
Resistive load cos = 1
Inductive load cos = 0.4
Resistive load
Rated loadNO: 25 A at 220 VAC (24 A at 230 VAC) NC: 8 A at 220 VAC (7.5 A at 230 VAC)
Rated carry currentNO: 25 A (1 A), NC: 8 A (1 A)
NO: 25 A at
30 VDC NC: 8 A at
30 VDC
Max. switching voltage250 VAC 125 VDC
Max. switching current NO: 25 A (1 A), NC: 8 A (1 A) Mechanical life 1,000,000 operations min. Electrical life100,000 operations min.
Note:Values between () indicate bifurcated contact specification.
Technical data
Contact materialAg alloy Operating time 50 ms max. Release time 50 ms max. Dielectric strength4,000 VAC
Ambient temperature Operating: -25 to 60°C (no icing)
607