CS-Series communication units Rack PLC Open to any communication, standard or user-defined CS1 provides both standardised open networks interfaces, and cost efficient, high- speed proprietary network links. Datalinks between PLCs, or to higher-level informa- tion systems can be made using Serial or Ethernet links, or the easy-to-use Controller Link network. Omron supports the 2 major field networks, DeviceNet and PROFIBUS-DP. For high- speed field I/O, Omron's own CompoBus/S offers an unsurpassed ease of installation. Fully user-configurable serial and CAN-based communication can be used to emulate a variety of application-specific protocols. EtherNet/IP units provide data link func- tions to share large amounts of data between PLCs. The PROFINET-IO controller to- gether with the SmartSlice modular I/O system offers ethernet-based I/O with controller- and network redundancy. Ordering information Type Ports Protocols Unit class Remarks Connection type Order code Serial 2 × RS-232C CompoWay/F, Host Link, NT link, Modbus, CPU bus unit – 9-pin D-Sub CS1W-SCU21-V1 User-defined Serial 2 × RS-232C/RS-485 CompoWay/F, Host Link, NT link, Modbus, CPU bus unit – 9-pin D-Sub CS1W-SCU31-V1 User-defined Serial 2 × RS-232C CompoWay/F, Host Link, NT link, Modbus, CPU option board – 9-pin D-Sub CS1W-SCB21-V1 User-defined Serial 1 × RS-232C + 1 × RS-422/RS-485 CompoWay/F, Host Link, NT link, Modbus, CPU option board – 9-pin D-Sub CS1W-SCB41-V1 User-defined GP-IB Master/Slave selectable GP-IB instrument communication Ethernet 1 × 100 Base-Tx UDP, TCP/IP, FTP server, SMTP (e-mail), SNTP (time adjust), FINS routing, socket service Special I/O unit – GP-IB CS1W-GPI01 CPU bus unit – RJ45 CS1W-ETN21 Controller link 2-wire twisted pair Omron proprietary CPU bus unit – 2-wire screw + GND CS1W-CLK23 Optical HPCF – 2 × HPCF connector CS1W-CLK13 Optical graded-index fiber – 4 × ST connector CS1W-CLK53 EtherNet/IP 1 × 100 Base-Tx EtherNet/IP, UDP, TCP/IP, FTP server, SNTP, SNMP CPU Bus unit 31 mm RJ45 CS1W-EIP21 DeviceNet 1 × CAN DeviceNet CPU bus unit – 5-p detachable CS1W-DRM21-V1 CompoNet 4-wire, data + power to slaves CompoNet (CIP-based) Special I/O unit – 4-p detachable IDC CS1W-CRM21 (Master) or screw CompoBus/S 2-wire (Master) Omron proprietary Special I/O unit – 2-wire screw + 2-wire power CS1W-SRM21 PROFIBUS-DP 1 × RS-485 (Master) DP, DPV1 CPU bus unit – 9-pin D-Sub CS1W-PRM21 CAN 1 × CAN CANopen, User-defined CPU bus unit – 5-p detachable CS1W-CORT21 PROFINET IO 1 × 100 Base-Tx PROFINET IO controller FINS UDP CPU bus unit – RJ45 CS1W-PNT21 PROFIBUS-DP 1 × RS-485 (Slave) DP C200H special I/O unit C200H units cannot be used on CS1D systems 9-pin D-Sub C200HW-PRT21 Accessories Description Connection type Order code RS-232C to RS-422/RS-485 signal converter. Mounts directly on serial port. 9-pin D-sub to screw clamp CJ1W-CIF11 terminals Controller link PCI board with support software PCI, wired CLK 3G8F7-CLK23-E Controller link PCI board with support software PCI, HPCF connectors 3G8F7-CLK13-E Controller link PCI board with support software PCI, ST connectors 3G8F7-CLK53-E Controller link repeater unit (wire to wire) Screw - Screw CS1W-RPT01 Controller link repeater unit (wire to HPCF fiber) Screw - HPCF connector CS1W-RPT02 Controller link repeater unit (wire to graded-index glass fiber) Screw - ST connector CS1W-RPT03 PROFIBUS DP to RS-422/RS-485 Serial Gateway. User-configurable, with Omron protocols built-in. 9-pin D-sub to screw clamp PRT1-SCU11 terminals PROFINET IO + ModBus/TCP to Modbus/RTU (RS-485) Gateway. 3 × RJ45 to screw clamp terminals EJ1N-HFU-ETN Note: For Ethernet Cables and Accessories, see page 81 43
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.