K8DS-PZ 3-phase control 3-Phase asymmetry, phase sequence, phase-loss and over-/undervoltage relay The K8DS-PZ is the simplified 3-phase monitoring relay, 3-wire circuits with one unit. It can monitor undervoltages, overvoltages, voltage asymmetry, phase sequence and phase-loss. • Greater resistance to inverter noise •One SPDT output relay, 5 A at 250 VAC (resistive load) • World-wide power specifications supported by one unit (Set with a rotary switch) • Relay statuscan be monitoredusing LED indicator Ordering information Rated input Order code 3-phase 3-wire mode 200, 220, 230, 240 VACK8DS-PZ1 3-phase 3-wire mode 380, 400, 415, 480 VACK8DS-PZ2 Specifications Ambient operating temperature –20 to 60°C (with no condensation or icing) Storage temperature –25 to 65°C (with no condensation or icing) Altitude 2,000 m max. Input frequency50/60 Hz (AC power supply) Output relays (1 × SPDT, normally closed operation) Resistive load5 A at 250VAC or at 30 VDC Maximum contact voltage250VAC or 30 VDC Maximum contact current 5 A Maximum switching capacity 1,250 VA, 150 W Mechanical life10,000,000 operations Electrical life 50,000 operations at 5 A, 250 VAC Degree of protection Terminal section: IP20 Case material PC UL94 V-0 WeightApprox. 65 g Rated input voltageK8DS-PZ13-phase,3-wire mode: 200, 220, 230, 240 VAC K8DS-PZ23-phase, 3-wire mode: 380, 400, 415, 480 VAC Operation (overvoltage or undervoltage) Asymmetry operation (ASY.) Operating value setting rangeOvervoltage/undervoltage: 2% to 30% of rated input voltage Operating value100% operation at set value Operating value setting rangeAsymmetry rate: 5% to 22% Operating value100% operation at set value Asymmetry operating value = rated input voltage x asymmetry set value [%] The asymmetry operation will function when the difference between the highest and lowest voltage phases equals or exceeds the asymmetry operating value Reset (HYS.)Hysteresis 5% of operating value (fixed) Resetting methodAutomatic reset Operating time (T) Asymmetry0.1 to 30 s Overvoltage/undervoltage0.1 to 30 s Phase-sequence, phase-loss 0.1 s ±0.05 s, 0.1 s max. Power ON lock (LOCK) 1 s ±0.5 s Overload capacity Continuous input: 500 V Repeat accuracy Operating value±0.5% full scale (at 25°C and an ambient humidity of 65% at the rated power supply voltage,50/60 Hz sine wave input) Operating time±50 ms (at 25°C and 65% humidity, rated power supply voltage) IndicatorsPower (PWR): Green, Relay output (RY): YellowLED, Alarmoutput: Red LED Applicable standards Conforming standards EN 60947-5-1 Installation environment (pollution level 2, installation category III) EMC EN 60947-5-1 Safety standardsUL 508 (Recognition), Korean Radio Waves Act (Act 10564), CSA: C22.2No.14 Size in mm (H × W × D) 80 × 17.5 × 74 651
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.