K8AK-TS/-PTTemperaturemonitor Thermistor motor protection relay TheK8AK-TS is the temperature monitoring relay based on the thermistor detection and can protect the motor from overheating. The K8AK-PT givesfurther functionalities such as temperature,3-phase sequence and loss monitoring and contributes to the overall safety 3-phase motor‘s operation. •DIN 22.5-mm-sized K8AK-PT relays • Side-by-side mountingof K8AK-PT relays • Specially designedfor internalmotor monitoring,no settingrequired • Test/Reset button for confirmation of output operation • Monitoring also performed for thermistor disconnections and short circuits • Manual or automatic resetting with the same relay Ordering information Rated input Order code Temperature monitoring 24 VAC/DC K8AK-TS1 24 VAC/DC Phase sequence, phase loss and temperature monitoring 100 to 240VACK8AK-PT1 100-240VAC K8AK-TS1 100-240 VAC Specifications Ambient operating temperature –20 to 60°C (with no condensation or icing) Storage temperature –25 to 65°C (with no condensation or icing) Input frequency50/60 Hz (AC power supply) Output relays (2 × SPDT, normally closed operation) Resistive load5 A at 250VAC or at 30 VDC Maximum contact voltage250VAC or 30 VDC Maximum contact current 5 A Maximum switching capacity 1,250 VA, 150 W Mechanical life10,000,000 operations Electrical life 50,000 operations at 250VAC or 30 VDC Degree of protection Terminal section: IP20 Case material PC and ABS UL94 V-0 WeightApprox. 150 g Rated input voltage 3-phase, 3-wire mode: 200 to 480 VAC Reset methodManual reset/automatic reset (switchable)*1 Operating time (T) Phase-sequence on three-phase voltage input Phase loss on three-phase voltage input 0.1s ±0.05s 0.1 s max. (when the voltage changes rapidly from 100 to 0% of rated voltage) PTC thermistor input 0.2 s max. Overload capacity Continuous input: 528 V IndicatorsPower (PWR): Green,PH alarm outputs (ALM): Red, TS alarm outputs (ALM): Red Applicable standards Conforming standards EN 60947-5-1 Installation environment (pollution level 2, installation category III) EMC EN 60947-5-1 Safety standardsUL 508 (Recognition), Korean Radio Waves Act (Act 10564), CSA and CCC Size in mm (H × W × D) 90 × 22.5 × 100 *1Manual reset method: Press the TEST/RESET button. 660
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.