K8AK-PM3-phase control 3-phase voltage, phase sequence, phase loss relay K8AK-PM monitors overvoltages, undervoltages, phase sequence and phase loss for 3-phase,3-wire or 4-wire power supplies,in one unit. This relay featuresa switch setting for 3-phase, 3-wire or 3-phase, 4-wire power supply. • Worldwide power specifications supported by one unit • Phase sequence, phase loss: Operation reaction time 0.1 s maximum • Overvoltages or undervoltages:Operation time setting from 0.1 to 30 s • Relay warning status can easily be monitored using the LED indicator • Easy wiring with ferrules Ordering information Rated input Order code 3-phase 3-wire mode 200, 220, 230, 240 VACK8AK-PM1 3-phase 4-wire mode 115, 127, 133, 138 VAC 3-phase 3-wire mode 380, 400, 415, 480 VACK8AK-PM2 3-phase 4-wire mode 220, 230, 240, 277 VAC Specifications Ambient operating temperature –20 to 60°C (with no condensation or icing) Storage temperature –25 to 65°C (with no condensation or icing) Input frequency50/60 Hz (AC power supply) Output relays (2 × SPDT, normally closed operation) Resistive load5 A at 250VAC or at 30 VDC Maximum contact voltage250VAC or 30 VDC Maximum contact current 5 A Maximum switching capacity 1,250 VA, 150 W Mechanical life10,000,000 operations Electrical life 50,000 operations at 5 A, 250VAC or 30 VDC Degree of protection Terminal section: IP20 Case material PC and ABS WeightApprox. 150 g Rated input voltageK8AK-PM13-phase,3-wire mode: 200,220,230,240VAC, 3-phase, 4-wire mode: 115, 127, 133, 138 VAC K8AK-PM23-phase, 3-wire mode: 380,400,415,480VAC, 3-phase, 4-wire mode: 220, 230, 240, 277 VAC Operation (overvoltage or undervoltage) Operating value setting rangeOvervoltage = –30% to 25% of maximum rated input voltage*1 Undervoltage = –30% to 25% of maximum rated input voltage*1 Operating value100% operation at set value Reset (HYS.)Hysteresis 5% of operating value (fixed) Resetting methodAutomatic reset Operating time (T) Overvoltage/undervoltage0.1 to 30 s Phase-sequence, phase-loss 0.1 s max. Power ON lock (LOCK) 1 s or 5 s (Changed with the DIP switch) Overload capacity Continuous input at 115% of maximum input, 10 s at 125% (up to 600 VAC) Repeat accuracy Operating value±0.5% full scale (at 25°C and an ambient humidity of 65% at the rated power supply voltage, DC or 50/60 Hz sine wave input) Operating time±50 ms (at 25°C and 65% humidity, rated power supply voltage) IndicatorsPower (PWR): Green LED, relayoutput (RY): Yellow LED, alarm outputs (ALM 1/2):Red LED Applicable standards Conforming standards EN 60947-5-1 Installation environment (pollution level 2, installation category III) EMC EN 60947-5-1 Safety standardsUL 508 (Recognition), Korean Radio Waves Act (Act 10564), CSA and CCC Size in mm (H × W × D) 90 × 22.5 × 100 *1The rated input voltage is switched with a switch 647
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.