F3S-TGR-N_C Safety door switches Hall coded non-contact for monitoring the status of guarding doors Hall coded non-contact switches monitor the status of guarding doors. Stainless steel housing for high hygiene demands in the food industry are available. • Based on hall technology • Connect up to 3 switches in series •LED supports easy diagnosis • Operates with all OMRON safety controllers • Operates behind stainless steel fittings • Non-contact – no abrasion – no particles • Compensation of mechanical tolerances • Suitable for high pressure cleaning, CIP/SIP processesdue IP69K (pre-wired types) • Conforms to safety categories up PLe acc. EN ISO13849-1 Ordering information Polyester housing TypeCable connection Contact configuration Order code Elongated sensors5 m pre-wired2NC/1NOF3S-TGR-NLPC-21-05 10 m pre-wired F3S-TGR-NLPC-21-10 M12, 8-pinF3S-TGR-NLPC-21-M1J8 Small sensors 5 m pre-wired F3S-TGR-NSPC-21-05 10 m pre-wired F3S-TGR-NSPC-21-10 M12, 8-pinF3S-TGR-NSPC-21-M1J8 Miniature sensors 5 m pre-wired*1 F3S-TGR-NMPC-21-05 10 m pre-wired*1F3S-TGR-NMPC-21-10 M12, 8-pin*1F3S-TGR-NMPC-21-M1J8 Barrel sensors 5 m pre-wiredF3S-TGR-NBPC-21-05 10 m pre-wired F3S-TGR-NBPC-21-10 M12, 8-pinF3S-TGR-NBPC-21-M1J8 *1Optional cable exit to the right side is available for F3S-TGR-NMPC-types. Please add “-R” to the order code (i.e. F3S-TGR-NMPC-21-05-R) Stainless steel housing TypeCable connection Contact configuration Order code Elongated sensors5 m pre-wired2NC/1NOF3S-TGR-NLMC-21-05 10 m pre-wired F3S-TGR-NLMC-21-10 M12, 8-pinF3S-TGR-NLMC-21-M1J8 Small sensors 5 m pre-wired F3S-TGR-NSMC-21-05 10 m pre-wired F3S-TGR-NSMC-21-10 M12, 8-pinF3S-TGR-NSMC-21-M1J8 Barrel sensors 5 m pre-wiredF3S-TGR-NBMC-21-05 10 m pre-wired F3S-TGR-NBMC-21-10 M12, 8-pinF3S-TGR-NBMC-21-M1J8 439 F3S-TGR-N_C Safety door switches Hygienic and food types TypeCable connection Contact configuration Order code Small sensors 5 m pre-wired2NC/1NOF3S-TGR-NSHC-21-05 10 m pre-wired F3S-TGR-NSHC-21-10 M12, 8-pin F3S-TGR-NSHC-21-M1J8 Small sensors (Special food type) 5 m pre-wired F3S-TGR-NSFC-21-05 10 m pre-wired F3S-TGR-NSFC-21-10 M12, 8-pin F3S-TGR-NSFC-21-M1J8 Miniature sensors 5 m pre-wired*1 F3S-TGR-NMHC-21-05 10 m pre-wired*1F3S-TGR-NMHC-21-10 M12, 8-pin*1 F3S-TGR-NMHC-21-M1J8 *1Optional cable exit to the right side is available forF3S-TGR-NMHC-types. Pleaseadd “-R” to the order code (i.e. F3S-TGR-NMHC-21-05-R) Specifications Mechanical data ItemModel Polyester types Stainless steel types Serial switchingup to 3 pcs. Indicator LED –LED green - Indication of safety circuit closed Operating distance*1 OFF ON (Sao) Min. 8 mm/max. 10 mm ON OFF (Sar)Min. 12 mm/max. 22 mm Actuator approach speedMin. Max. 4 mm/s 1,000 mm/s Operating temperature ––25 to 80°C–25 to 105°C Enclosure protection Flying lead M12 connector IP69K IP67 Material cable Flying leadPVC, Ø 6 mm o.d. M12 connector250mm,PVC, Ø 6 mm o.d. Material housing –Black polyesterStainless steel 316 *1Depends on type. Please see online data sheet. Electrical data ItemModel Polyester types Stainless steel types Sensor technology–Hall Power supply–24 VDC±15% Power consumptionMax. 50 mA Switching currentMin.10 mA, 10 VDC Rated loadsNC contacts NO contact Max. 200 mA, 24 VDC 200 mA, 24 VDC Output type–Electronic output (potential-free optocoupler output) Approved standards EN standards certified by TÜV Rheinland EN ISO13849-1 EN 62061 EN ISO 14119 EN 60204-1 EN/IEC 60947-5-3 UL 508,CSA C22.2 BS 5304 EN 1088-1 conformance 440 F3S-TGR-N_C Safety door switches Accessories Order code Cables 8-pin 2 m Y92E-M12PURSH8S2M-L 5m Y92E-M12PURSH8S5M-L 10 m Y92E-M12PURSH8S10M-L 25 m Y92E-M12PURSH8S25M-L T-connector connection cable M12 T-connector for M12 connector-typesF39-TGR-NT 0.6 m, M12-8pin Y92E-M12FSM12MSPURSH806M-L 2 m, M12-8pinY92E-M12FSM12MSPURSH82M-L 5 m, M12-8pinY92E-M12FSM12MSPURSH85M-L 10 m, M12-8pin Y92E-M12FSM12MSPURSH810M-L Actuators for F3S-TGR-NLPCF39-TGR-NLPC-A for F3S-TGR-NSPC F39-TGR-NSPC-A for F3S-TGR-NMPCF39-TGR-NMPC-A for F3S-TGR-NCPCF39-TGR-NCPC-A for F3S-TGR-NWPCF39-TGR-NWPC-A for F3S-TGR-NBPCF39-TGR-NBPC-A for F3S-TGR-NLMC F39-TGR-NLMC-A for F3S-TGR-NSMC F39-TGR-NSMC-A for F3S-TGR-NBMC F39-TGR-NBMC-A for F3S-TGR-NSHCF39-TGR-NSHC-A for F3S-TGR-NSFC F39-TGR-NSFC-A for F3S-TGR-NMHC F39-TGR-NMHC-A Mounting screwsSet of Torx safety screws (M4, 4 × 30 mm, 4 × 20 mm, 4 × 10 mm incl. washers and Torx bit) F39-TGR-N-SCREWS Wiring examples (Single head connection) G9SA Single sensor application with G9SA-301 (up to PLe acc. EN ISO 13849-1) +24 VGND Start Magnetic actuator F3S-TGR-NxxC Sensor red blue black white yellow green brown orange NO contact A1 A2 G9SA-301 T11 T12 T22 T21 T31 T32 Feed- back- loop KM1 KM2 KM1 13 143334 KM1 KM2 KM2 +Us M GND 441
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.