EE-SX47/67Miniature and Photomicro sensors Photo microsensor in plastic fork shape housing Standardphotomicrosensorswith 50 to 100 mA direct switchingcapacity for best value-performance ratio to detect machine parts or end positions independent of material or magnetic fields. • Response frequency up to 1 kHz • Wide operating voltage range: 5 to 24 VDC Ordering information Connector models Sensor typeSensing distance Connection methodOperation Mode Shape*1 Order code *2 NPN output PNP output Through-beam with slot 5 mm (slot width) (Infrared light) Connector (4 pin)*3 Dark-ON/Light-ON (selectable) Standard EE-SX670EE-SX670P L-shapedEE-SX671EE-SX671P T-shaped, 7 mm EE-SX672EE-SX672P Close- mounting EE-SX673EE-SX673P Close- mounting EE-SX674EE-SX674P T-shaped, 10 mm EE-SX675EE-SX675P F-shapedEE-SX676EE-SX676P R-shapedEE-SX677EESX-677P *1For shape dimensions refer to datasheet on www.industrial.omron.eu *2For pre-wired models with 1 m cable add '-WR' to order reference (e.g. EE-SX670-WR) *3Order connector separately from accessories 194 EE-SX47/67Miniature and Photomicro sensors Specifications Item Through-beam Standard L-shapedT-shaped, slot center: 7 mm Close-mountingT-shaped, slot center: 10 mm F-shapedR-shaped NPN EE-SX670 EE-SX671EE-SX672EE-SX673 EE-SX674 EE-SX675EE-SX676 EE-SX677 PNPEE-SX670PEE-SX671P EE-SX672P EE-SX673P EE-SX674P EE-SX675PEE-SX676P EE-SX677P Sensing distance5 mm (slot width) Power supply voltage5 to 24 VDC ±10%, ripple (p-p): 10% max. Response frequency1 kHz min. (3 kHz average) Ambient temperature Operating: –25 to 55°C, Storage: –30 to 80°C Degree of protectionIEC60529 IP50 MaterialCase PBT (polybutylene terephthalate) Lens Polycarbonate Accessories (order separately) TypeCable length Material Order code Connector with Cable 2 m PVCEE-1010 2M Connector with Robot Cable 2 m PVCEE-1010R 2M Note:For mechanical limit switches see page 304 Easy to mount end position detection/limit sensors (contactless). 195
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.