Slim Safety-door Switches with IP67 Rating
• The slim safety-door switches with a three-terminal contact construction.
• Reversible design allowing either front or rear mount- ing.
• Built-in switches with two- or three-terminal contact construction are available.
• Operation Key with rubber mounting hole to absorb vibration and shock.
Slim Safety-door Switches with 3-terminal
Thin and 1/2 the size as OMRON’s previous models.
Key Mounting Hole
The key mounting hole is designed with rubber to absorb vibration and shock.
30 mm17 mm
IP67 Degree of Protection
(Applicable to main body only Operation Key insertion face meets IP00.)
The D4GS-N uses rust-resistant materials and incorporates a drain opening as effective countermeasures against problems caused by water.
Note: IP67 is based on the test method specified in EN60947-5-1. Be sure to confirm in advance the sealing performance under the actual operating
Front and rear mounting are both possible.
Two- and three-terminal contact models are available.
environment and conditions.
Meeting EN (TÜV) Standards and CE marking requirements along with a variety of international standard requirements, such as UL and CSArequirements. AllNCcontacts satisfyrequirements forthe direct opening mechanism.
Safety Zb contact
For safety category circuit
For ProgrammableController input or indicator
Note: The safety contacts are direct opening contacts approved by EN and each of them is indicated with the mark.