Product successfully added to your shopping cart
CS1W-ETN21
CS1W0387D
CS1WETN21.1
OMRON
1
Available Ship on today
Ethernet module 10/100 BaseT RJ45
Ethernet unit for CS-series, 100Base-TX and 10 Base-T, 1 x RJ45 socket, TCP/IP & UDP/IP socket services, FTP, SMTP, FINS
Control Systems > CS1
* Brand new product in its original packaging covered by the warranties and certifications provided by OMRON
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
CS-Series communication unitsRack PLC
Open to any communication, standard or user-defined
CS1 provides both standardised open networks interfaces, and cost efficient, high-
speed proprietary network links. Datalinks between PLCs, or to higher-level informa- tion systems can be made using Serial or Ethernet links, or the easy-to-useController Link network.
Omron supportsthe 2 major field networks,DeviceNet and PROFIBUS-DP. For high-
speed field I/O, Omron's own CompoBus/S offers an unsurpassedease of installation. Fully user-configurable serial and CAN-based communication can be used to emulate a variety of application-specific protocols. EtherNet/IP units provide data link func- tions to share large amounts of data between PLCs. ThePROFINET-IO controller to-
getherwith the SmartSlice modularI/O system offers ethernet-basedI/O with controller- and network redundancy.
Ordering information
TypePorts Protocols Unit classRemarksConnection typeOrder code
Serial 2 × RS-232CCompoWay/F, Host Link, NT link, Modbus, CPU bus unit–9-pin D-SubCS1W-SCU21-V1
User-defined
Serial 2 × RS-232C/RS-485 CompoWay/F, Host Link, NT link, Modbus, CPU bus unit–9-pin D-SubCS1W-SCU31-V1
User-defined
Serial 2 × RS-232CCompoWay/F, Host Link, NT link, Modbus, CPU option board –9-pin D-SubCS1W-SCB21-V1
User-defined
Serial 1 × RS-232C +
1 × RS-422/RS-485
CompoWay/F, Host Link, NT link, Modbus, CPU option board –9-pin D-SubCS1W-SCB41-V1
User-defined
GP-IBMaster/Slaveselectable GP-IB instrument communication
Ethernet1 × 100 Base-Tx UDP, TCP/IP, FTP server,
SMTP (e-mail),SNTP (timeadjust), FINS routing, socket service
Special I/O unit –GP-IB CS1W-GPI01
CPU bus unit–RJ45CS1W-ETN21
Controller link2-wire twisted pairOmron proprietary CPU bus unit–2-wire screw + GND CS1W-CLK23
Optical HPCF–2 × HPCF connectorCS1W-CLK13
Optical graded-index fiber–4 × ST connectorCS1W-CLK53
EtherNet/IP 1 × 100 Base-TxEtherNet/IP, UDP, TCP/IP, FTP server, SNTP, SNMP
CPU Bus unit31 mmRJ45CS1W-EIP21
DeviceNet1 × CANDeviceNet CPU bus unit–5-p detachable CS1W-DRM21-V1
CompoNet4-wire, data + power to slaves CompoNet (CIP-based)Special I/O unit –4-p detachable IDC
CS1W-CRM21
(Master)
or screw
CompoBus/S2-wire (Master) Omron proprietary Special I/O unit –2-wire screw +
2-wire power
CS1W-SRM21
PROFIBUS-DP1 × RS-485 (Master)DP, DPV1 CPU bus unit–9-pin D-SubCS1W-PRM21
CAN1 × CANCANopen, User-defined CPU bus unit–5-p detachable CS1W-CORT21
PROFINET IO1 × 100 Base-Tx
PROFINET IO controller
FINS UDP CPU bus unit–RJ45CS1W-PNT21
PROFIBUS-DP1 × RS-485 (Slave) DPC200H special
I/O unit
C200H units cannot be used on CS1D systems
9-pin D-SubC200HW-PRT21
Accessories
DescriptionConnection typeOrder code
RS-232C to RS-422/RS-485 signal converter. Mounts directly on serial port. 9-pin D-sub to screw clamp CJ1W-CIF11 terminals
Controller link PCI board with support softwarePCI, wired CLK 3G8F7-CLK23-E Controller link PCI board with support softwarePCI, HPCF connectors 3G8F7-CLK13-E Controller link PCI board with support softwarePCI, ST connectors3G8F7-CLK53-E Controller link repeater unit (wire to wire)Screw - ScrewCS1W-RPT01
Controller link repeater unit (wire to HPCF fiber) Screw - HPCF connectorCS1W-RPT02
Controller link repeater unit (wire to graded-index glass fiber)Screw - ST connectorCS1W-RPT03
PROFIBUS DP to RS-422/RS-485 Serial Gateway. User-configurable, with Omron protocols built-in.9-pin D-sub to screw clampPRT1-SCU11 terminals
PROFINET IO + ModBus/TCP to Modbus/RTU (RS-485) Gateway. 3 × RJ45 to screw clamp terminals
EJ1N-HFU-ETN
Note:For Ethernet Cables and Accessories, see page 81
43
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.