PRT1-SCU11 Auxiliaries Omron’s intelligent PROFIBUS and CompoWay/F gateway This gatewaysupportsall CompoWay/F equippedproducts,including temperaturecontrollers, digital panel indicators, etc. It can also be used for connecting MCW151-E andE5_K series. • Cost-effectively integratesbasic instrumentsinto a PROFIBUS network • Requires no complex protocol conversion writing • Has function blocks for drag-and-drop configuration • Connects up to 15 instruments to a single PROFIBUS point Ordering information Specifications NameOrder code PROFIBUS remote terminal serial communications unit PRT1-SCU11 Supports all CompoWay/F equippedunits, but has “drag-and-drop”function blocks for • E5AN/E5EN/E5CN/E5GN •E5ZN andCelciuXº (EJ1) • E5AR/E5ER • E5AK/E5EK ES1B ItemPRT1-SCU11 Storage temperature –20 to +75°C Ambient temperature 0 to 55°C Ambient humidity10 to 90% (non-condensing) EMC compliance EN 50081-2, EN 61131-2 Power supply+24 VDC (+10%/–15%) Current consumption 80 mA (typical) Weight 125 g (typical) Communication interface RS-485 based PROFIBUS-DP RS-422A Host link RS-485 CompoWay/F RS-232C Peripheral Port supporting connection to thermotools Size in mm (H×W×D)90×40×65 Achieve low-cost measurements with an infrared thermosensor This infrared thermosensor provides an accurate, stable and cost-effective way to measure the temperatureof objects. It behaves just like a standardK-type thermo- couple, which enables it to operate with any temperature controller or alarm unit. • Cost-effective infrared thermosensor • Contactless, meaning no deterioration, unlike thermocouples • 4 temperatureranges available: 10-70°C, 60-120°C, 115-165°C and 140-260°C • Response speed 300 ms Ordering information Specifications Appearance and sensing characteristics 2 mm 20 mm 40 mm 60 mm Specification Order code 10 to 70°C ES1B 10-70C 60 to 120°C ES1B 60-120C 115 to 165°CES1B 115-165C ItemES1B Power supply voltage 12/24 VDC Current consumption20 mA max. Accuracy ±5°C±2%PV or ±2°C, whichever is larger ±10°C±4%PV or ±4°C, whichever is larger 2 dia. 20 dia. 40 dia.60 dia. 140 to 260°CES1B 140-260C ±30°C±6%PV or ±6°C, whichever is larger ±40°C±8%PV or ±8°C, whichever is larger Dimensions (unit: mm) 44.5 3,000 Reproducibility ±1%PV or ±1°C, whichever is larger Temperature drift 0.4°C/°C max. Receiver elementThermopile 14.2 dia. 6.5 36.5 ABS resin Polyoleﬁn tube Screw M18×1.0 PVC-covered (–25°C to 70°C) Green, output + White, output – Orange, power + Shield, power – Response speedApproximately 300 ms at response rate of 63% Operating temperature –25 to 70°C (with no icing or condensation) Allowable ambient humidity35 to 85% Degree of protectionIP65 Size in mmhead: 17.8 dia.×44.5 (screw M18×1.0), cable 3,000 17.8 15 536
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.