High Precision Positioning Inductive Proximity Sensor E2C-EDA CSM_E2C-EDA_DS_E_7_1 Proximity Sensor with Separate Amplifier Enables Easily Making High- precision Sensitivity Settings. • Wide variety of Sensor Heads to select according to the application. Flexible cables are used between Preamplifiers and Amplifier Units of the Sensor Heads. • High resistance to changes in ambient temperature. Temperature characteristics of 0.08%/°C (for 5.4-dia. models). • Make simple and reliable detection settings with micron-level precision using the teaching function. • Check the sensing excess gain level on the digital display. • Support for high-precision positioning and screening with fine positioning to maximize variations. • The E2C-EDA0 supports an EtherCAT Sensor Communications Unit or CompoNet Sensor Communications Unit. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 10. Ordering Information Sensors [Refer to Dimensions on page 12.] Sensor Heads Type AppearanceSensing distance Repeat accuracy Cable specificationModel 3 dia. × 18 mm 0.6 mm 1 μm Free cutting *2E2C-EDR6-F Standard *2E2C-ED01 Shielded Cylindrical Screw Flat Screw 5.4 dia. × 18 mm 8 dia. × 22 mm M10 × 22 mm 30 × 14 × 4.8 mm 1 mm 2 mm 2 mm 5 mm 1 μm 2 μm 2 μm 2 μm Free cutting *2E2C-ED01-F With Protective Spiral Tube *1 *2E2C-ED01-S Standard *2E2C-ED02 Free cutting *2E2C-ED02-F With Protective Spiral Tube *1 *2E2C-ED02-S Standard *2E2C-EM02 Free cutting *2E2C-EM02-F With Protective Spiral Tube *1 *2E2C-EM02-S Standard *2E2C-EV05 Free cutting *2E2C-EV05-F With Protective Spiral Tube *1 *2E2C-EV05-S Standard *2E2C-EM07M Free cutting *2E2C-EM07M-F Unshielded M18 × 46.3 mm 7 mm 5 μm With Protective Spiral Tube *1 *2E2C-EM07M-S Screw Heat-resistantM12 × 22 mm 2 mm 2 μm Standard *2E2C-EM02H *1Ask your OMRON representative for information on the Protective Spiral Tube. *2Overall length of free-cut cable: 3.5 m, Length from the Sensor Head to the Preamplifier: 0.5 m (Overall length of the standard cable with Protective Spiral Tube: 2.5 m, Length from the Sensor Head to the Preamplifier: 2 m) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.