CJ-Series power supplies, expansions Modular PLC Power and flexibility CJ systems can operate on 24 VDC power supply, or on 100 to 240 VAC mains. For small-scale systems with mainly digital I/O a low cost, small capacity power supply can be used. For systems with many analog I/Os and control/communication units, it may be necessary to use a larger power supply unit. Depending on the CPU type, up to 3 expansions can be connected to the CPU 'rack', giving a total capacity of 40 I/O units. The total length of the expansion cables of one system may be up to 12 m. Ordering information Power supply Input range Power consumption Output capacity at 5 VDC Output capacity at 24 VDC Max. output power Features Width Order code 21.6 to 26.4 VDC 35 W max. 2.0 A 0.4 A 16.6 W – 27 mm CJ1W-PD022 19.2 to 28.8 VDC 50 W max. 5.0 A 0.8 A 25 W – 60 mm CJ1W-PD025 85 to 264 VAC 47 to 63 Hz 50 VA max. 2.8 A 0.4 A 14 W – 45 mm CJ1W-PA202 100 VA max. 5.0 A 0.8 A 25 W Run output (SPST relay) 80 mm CJ1W-PA205R Maintenance status display 80 mm CJ1W-PA205C Note: The CJ1W-PD022 has no galvanic isolation I/O expansion Type Description Width, Length Order code I/O control unit Required unit on CPU 'rack' to connect I/O expansions 20 mm CJ1W-IC101 I/O interface unit Start unit for each I/O expansion 'rack'. Requires a power supply unit. 31 mm CJ1W-II101 I/O expansion cable Connects CJ1W-IC101 or -II101 to the next expansion rack's -II101 0.3 m CS1W-CN313 0.7 m CS1W-CN713 2.0 m CS1W-CN223 3.0 m CS1W-CN323 5.0 m CS1W-CN523 10 m CS1W-CN133 12 m CS1W-CN133-B2 30
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.