61F-GP-N8Level Control Compact plug-in (8-pin) level controller The 61F-GP-N8 can be used for single- or two-pointlevel control of conductive materials, both liquids and solids. These products are equipped with a red LED operation indicator. • Low-voltage (AC) electrodes (8 VAC or 24 VAC) • Operation range: 4 to 15 k, 70 to 300 k • Detection method: Conductive • Probes need to be ordered separately • Conforms to EMC and LVD directives, UL/CSA approved Ordering information ApplicationType Order code Ordinary purified water or sewage water General purpose type61F-GP-N8 24AC 61F-GP-N8 110AC 61F-GP-N8 230AC Ordinary purified water, where the distance between sewage pumps and water tanks or between receiver tanks and supply tanks is long or where remote control is required Long-distance type2 km 61F-GP-N8L 24AC 2KM 61F-GP-N8L 110AC 2KM 61F-GP-N8L 230AC 2KM 4 km 61F-GP-N8L 24AC 4KM 61F-GP-N8L 110AC 4KM 61F-GP-N8L 230AC 4KM Liquids with high specific resistance such as distilled water High sensitivity type61F-GP-N8H 24AC 61F-GP-N8H 110AC 61F-GP-N8H 230AC Liquids with low specific resistance such as salt water, sewage water, acid chemicals, alkali chemicals Ordinary purified or sewage water, with two-wired-type electrode holder (incorporating a resistor of 6.8 k) Low sensitivity type 61F-GP-N8D 24AC 61F-GP-N8D 110AC 61F-GP-N8D 230AC Two-wired type 61F-GP-N8R 24AC 61F-GP-N8R 110AC 61F-GP-N8R 230AC DIN-rail mounting socketPF083A-E Back-connecting socketPL08 Accessories Electrode holders ApplicationsMounting style Insulator material Max. temperatureNumber of electrodes Order code For city water and other general use. Easy-to-replace separate versions for maintenance. FlangePhenol resin 70°C 3 PS-3S When mounting space is limited. Special 3pole holder of small size and light weight. ScrewPhenol resin 3, 300 mm 3, 1,000 mm PS-31-300MM PS-31-1000MM Use for sewage, sea water, etc., having a low specific resistance. For resistance to high pressure. Use in tanks with high temperature or pressure. Flange PPS150°C (without water drips or vapour on the1 BF-1 electrode holder surface) ScrewPFA 250°C (without water drips or vapour on the1 BS-1 surface of the electrode holder) Electrode separatorsNumber of electrodes Order code Electrodes, connecting, and lock nuts 1 F03-14 1P 3 F03-14 3P Applicable liquidsMaterial ComponentIndication markInscriptionOrder code Purified city water, industrial water, sewageEquivalent to SUS 304 (AISI-304) Electrode (1 m long) 1 line – F03-01 SUS201 Connecting nut –– F03-02 SUS201 Lock nut–– F03-03 SUS201 Purified city water, industrial water, sewage, dilute alkaline solution SUS316 (AISI-316) Electrode (1 m long) 2 lines – F03-01 SUS316 Connecting nut –6 F03-02 SUS316 Lock nut–316 F03-03 SUS316 654 61F-GP-N8Level Control Specifications Item 61F-GP-N8 61F-GP-N8L 61F-GP-N8H61F-GP-N8D61F-GP-N8R Supply voltage24, 100, 110, 120, 200, 220, 230 or 240VAC 50/60 Hz Operating voltage range 85 to 110% of rated voltage Interelectrode voltage 8 VAC24 VAC 8 VAC Interelectrode current Approx. 1 mA AC max.Approx. 0.4 mA AC max. Approx. 1 mA AC max. Power consumptionApprox. 3.5 VA max. Response time Operate: 80 ms max., release: 160 ms max. Cable length1 km max. 2 km max. 4 km max. 50 m max. 1 km max. 800 m max. Control output 1 A, 250VAC (inductive load: Cos = 0.4), 3 A, 250VAC (resistive load) Ambient temperatureOperating: -10 to 55°C Life expectancy Electrical: 100,000 operations min., mechanical: 5,000,000 operations min Size in mm (HxWxD)49.9x38x70 655
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.