E54-CT3 E54 9003F E54CT3 OMRON Current transformer 120A

Multi-channel power controller

4

Supported

100 to 240 VAC

G3ZA-4H203-FLK-UTU

400 to 480 VAC

G3ZA-4H403-FLK-UTU

8

Not supported

100 to 240 VAC

G3ZA-8A203-FLK-UTU

400 to 480 VAC

G3ZA-8A403-FLK-UTU

Power supply voltage

100 to 240 VAC (50/60 Hz)

Operating voltage range

85 to 264 VAC

Power consumption

16 VA max.

Load power supply voltage

100 to 240 VAC

400 to 480 VAC

Load power supply voltage range

75 to 264 VAC

340 to 528 VAC

Manipulated variable input

0.0 to 100.0% (via RS-485 communications)

Current transformer input

Single-phase AC, 0 to 50 A (primary current of CT)

Trigger output

One voltage output for each channel, 12 VDC ±15%, max. load current: 21 mA
(with built-in short-circuit protection circuit)

Alarm output

NPN open collector, one output
Max. applicable voltage: 30 VDC
Max. load current: 50 mA
Residual voltage: 1.5 V max.
Leakage current: 0.4 mA max.

Indications

LED indicators

Ambient operating temperature

-10 to 55°C (with no icing or condensation)

Ambient operating humidity

25 to 85%

Storage temperature

-25 to 65°C (with no icing or condensation)

Performance

Current indication accuracy

±3 A (for models with heater burnout detection)

Insulation resistance

100 MΩ min. (at 500 VDC) between primary and secondary

Dielectric strength

2,000 VAC, 50/60 Hz for 1 min between primary and secondary

Vibration resistance

Vibration frequency: 10 to 55 Hz, acceleration: 50 m/s2in X, Y, and Z directions

Shock resistance

300 m/s2three times each in six directions along three axes

Weight

Approx. 200 g (including terminal cover)

Degree of protection

IP20

Memory protection

EEPROM (non-volatile memory) (number of writes: 100,000)

Installation environment

Overvoltage category III, pollution degree 2 (according to IEC 60664-1)

Approved standards

UL508 (Listing), CSA22.2 No. 14
EN50178
EN61000-6-4 (EN55011: 1998, A1: 1999 Class A, Group 1)
EN61000-6-2: 2001

Size in mm (H×W×D)

76×45×111