No products
Product successfully added to your shopping cart
VG-BC DC-TS900 5088635 OBO BETTERMANN DEVICE PROTECTION VG-BC DC-TS900
VG-BC DC-TS900
5088635
OBO BETTERMANN
DEVICE PROTECTION VG-BC DC-TS900
Generator connection box, type 1+2, to 900 V DC with disconnection switch (32 A) 1 x 1 string. System solution for circuit breaker photovoltaic inverter with 1 MPP tracker• Varistor arrester, connectable with cut-off unit in error-resistant Y circuit to VDE 0100-712 (50539-12) • Low DC protection level: < 3.0 kV (Voc max = 900 V DC with V25-B+C/0-450PV) • Circuit breaker (1,000 V; 32 A) for secure switch-off of the DC string cable• Per protection device there is 1 terminal up to 6 mm² pre-mounted in the housing, up to 30 A DC per terminal • Pre-mounted in polycarbonate housing (IP65), UV-resistant for use outside, including cable gland kitFor DC protection of the inverter in photovoltaic systems.If there is a danger of condensation forming through wind, ice, temperature or sunlight, furt
TBS Transient and lightning protection systems - OBO BETTERMANN
Brand new product in its original packaging covered by the warranties and certifications provided by OBO BETTERMANN
Related products
▲Best sellers
▲More info
▲| Anschlussart Generatoranschlusskasten | Tension spring terminal |
|---|---|
| Blow-out | no |
| CO2 Footprint (GWP) Cradle-to-Gate | 3,4202 kg CO2e / 1 Piece |
| Colour | Light grey; RAL 7035 |
| Conductor cross-section, rigid (single-wire/multiwire), max. | 6 mm² |
| Conductor cross-section, rigid (single-wire/multiwire), min. | 0,5 mm² |
| DC network form | yes |
| Depth | 122 mm |
| Dimension | 900V DC |
| Entries per MPPT | 1 |
| Equipped with load-break switch | yes |
| Exits per MPPT | 1 |
| Installation type | Pre-mounted in the housing |
| IT network form | no |
| Lightning protection zone LPZ | 0→2 |
| Lightning surge current (10/350 μs) | 7 kA |
| Max. Input current per string | 30 A |
| Max. Input voltage DC | 900 V |
| Max. mains-side overcurrent protection | 160 |
| Max. Output current | 30 A |
| Maximum back-up fuse | 160 A |
| Maximum continuous voltage DC | 900 V |
| Maximum discharge current (8/20 μs) | 50 kA |
| Monitoring function | no |
| Network form | DC |
| Nominal discharge current (8/20 µs) | 30 kA |
|---|---|
| Number of cable entries | 16 |
| Number of inputs | 1 |
| Number of MPPTs | 1 |
| Number of string inputs | 1 |
| Operating temperature, max. | 80 °C |
| Operating temperature, min. | -40 °C |
| Other network form | no |
| Permitted temperature range, max. | 80 °C |
| Permitted temperature range, min. | -40 °C |
| Protection rating | IP65 |
| Remote signalling | no |
| Response time | <25 ns |
| Signalling on device | Visual |
| SPD to EN 61643-11 | Type 1+2 |
| SPD to IEC 61643-1 | Class I+II |
| String fuse | Without |
| TN network form | no |
| TN-C network form | no |
| TN-C-S network form | no |
| TN-S network form | no |
| TT network form | no |
| Type of entry | Gland |
| Version for | Type 1+2 and Benedikt LS32-SMA-A4 DC isolator |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOGUE SURGE PROTECTION OBO EN.pdf | 24 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.