No products
Product successfully added to your shopping cart
ÜSM-10-230I2P+PE 5092426 OBO BETTERMANN PROTEC LED ÜSM-10-230I2P+PE, 2FAS
USM-10-230I2P+PE
5092426
OBO BETTERMANN
PROTEC LED ÜSM-10-230I2P+PE, 2FAS
Surge protection module ÜSM-10-230l2P+PE. Surge protection module type 2+3 to DIN EN 61643-11 for 230/400 V power grids.Appropriate for the protection of electronic devices and LED drivers. • For luminaires with 2 phases (power reduction)• With function display and switch-off of the load circuit when an SPD fails• Small size for the installation in the pole connection box or upstream of the LED driver• Protective circuit with a maximum arresting capacity of 10 kA• Reduction of overvoltage to under 1,300 V (protection level)• For LED luminaires with PE connectionApplication: In the cable transition box, junction boxes, cable duct to underfloor systemsTo protect electronic devices such as LED luminaires against surge voltages
TBS Transient and lightning protection systems - OBO BETTERMANN
Brand new product in its original packaging covered by the warranties and certifications provided by OBO BETTERMANN
Related products
▲Best sellers
▲More info
▲| Arrester surge current (8/20 µs) [total] | 10 kA |
|---|---|
| CO2 Footprint (GWP) Cradle-to-Gate | 0,0298 kg CO2e / 1 Piece |
| Combined voltage protection level [L-PE] | 1,3 kV |
| Connecting cable length | 0,09 m |
| Dimension | 230V |
| Height | 21 mm |
| Installation type | Miscellaneous |
| Length | 155 mm |
| Lightning protection zone LPZ | 1→2 |
| Max. mains-side overcurrent protection | 16 |
| Maximum back-up fuse | 16 A |
| Maximum continuous voltage (L-N) | 255 V |
| Maximum continuous voltage (N-PE) | 255 V |
| Maximum continuous voltage AC | 255 V |
| Maximum discharge current (8/20 μs) | 10 kA |
| Maximum discharge current (8/20 μs) [L-N] | 10 kA |
| Maximum discharge current (8/20 μs) [N-PE] | 10 kA |
| Nominal discharge current (8/20 µs) | 5 kA |
| Nominal discharge current (8/20 µs) [L-N] | 5 kA |
| Nominal discharge current (8/20 µs) [N-PE] | 5 kA |
|---|---|
| Nominal voltage AC (50/60 Hz) | 230 V |
| OBO_Nominal load current (input/output terminal) | 16 A |
| Operating temperature, max. | 80 °C |
| Operating temperature, min. | -40 °C |
| Permitted temperature range, max. | 80 °C |
| Permitted temperature range, min. | -40 °C |
| Pole version | 2+N/PE |
| Protection level [L-N] | ≤1,3 |
| Protection rating | IP20 |
| Response time | <25 ns |
| Signalling on device | Visual |
| SPD to EN 61643-11 | Type 2+3 |
| SPD to IEC 61643-1 | Class II+III |
| Test class, type 2 | yes |
| Test class, type 3 | yes |
| Version for | 2-pole + NPE for PC I |
| Width | 40 mm |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOGUE SURGE PROTECTION OBO EN.pdf | 24 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.