HSN-300-5A MEANWELL 300W Single Output Switching Power Supply, 250W, 50A

300W Single Output Switching Power Supply 300W Single Output Switching Power Supply
300W Single Output Switching Power Supply HSN-300series HSN-300series
HSN-300seriesFeatures : Features :
Features : Low leakagecurrent81mA Low leakagecurrent81mA
Low leakagecurrent81mA Protections: Short circuit/ Overload / Over voltage/ Over temperature Protections: Short circuit/ Overload / Over voltage/ Over temperature
Protections: Short circuit/ Overload / Over voltage/ Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection Low profile:31mm Low profile:31mm
Low profile:31mm Conformal coated Conformal coated
Conformal coated LED indicator for power on LED indicator for power on
LED indicator for power on Low cost, high power reliability Low cost, high power reliability
Low cost, high power reliability 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test 2 years warranty 2 years warranty
2 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL DC VOLTAGE DC VOLTAGE
DC VOLTAGE HSN-300-4.2A HSN-300-4.2A
HSN-300-4.2A 4.2V 4.2V
4.2V HSN-300-4.2B HSN-300-4.2B
HSN-300-4.2B 4.2V 4.2V
4.2V HSN-300-5A HSN-300-5A
HSN-300-5A 5V 5V
5V HSN-300-5B HSN-300-5B
HSN-300-5B 5V 5V
5V RATED CURRENTNote.2 50A RATED CURRENTNote.2 50A
RATED CURRENTNote.2 50A 60A 60A
60A 50A 50A
50A 60A 60A
60A CURRENT RANGE CURRENT RANGE
CURRENT RANGE RATED POWER(convection) RATED POWER(convection)
RATED POWER(convection) 0 ~ 50A 0 ~ 50A
0 ~ 50A 210W 210W
210W 0 ~ 60A 0 ~ 60A
0 ~ 60A 252W 252W
252W 0 ~ 50A 0 ~ 50A
0 ~ 50A 250W 250W
250W 0 ~ 60A 0 ~ 60A
0 ~ 60A 300W 300W
300W OUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.3 150mVp-p RIPPLE & NOISE (max.) Note.3 150mVp-p
RIPPLE & NOISE (max.) Note.3 150mVp-p 150mVp-p 150mVp-p
150mVp-p 150mVp-p 150mVp-p
150mVp-p 150mVp-p 150mVp-p
150mVp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4
VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 LINE REGULATION LINE REGULATION
LINE REGULATION LOAD REGULATION LOAD REGULATION
LOAD REGULATION 3.6~4.4V 3.6~4.4V
3.6~4.4V 3.0% 3.0%
3.0% 0.5% 0.5%
0.5% 2.0% 2.0%
2.0% 3.6~4.4V 3.6~4.4V
3.6~4.4V 3.0% 3.0%
3.0% 0.5% 0.5%
0.5% 2.0% 2.0%
2.0% 4.5~5.5V 4.5~5.5V
4.5~5.5V 3.0% 3.0%
3.0% 0.5% 0.5%
0.5% 2.0% 2.0%
2.0% 4.5~5.5V 4.5~5.5V
4.5~5.5V 3.0% 3.0%
3.0% 0.5% 0.5%
0.5% 2.0% 2.0%
2.0% SETUP, RISE TIME HOLD UP TIME (Typ.) SETUP, RISE TIME HOLD UP TIME (Typ.)
SETUP, RISE TIME HOLD UP TIME (Typ.) 2500ms, 100ms/230VAC; 2500ms, 100ms/115VAC 2500ms, 100ms/230VAC; 2500ms, 100ms/115VAC
2500ms, 100ms/230VAC; 2500ms, 100ms/115VAC 10ms/230VAC;8ms/115VAC at full load 10ms/230VAC;8ms/115VAC at full load
10ms/230VAC;8ms/115VAC at full load VOLTAGE RANGE90~132VAC or 254~373VDC 180~264VAC or 254~373VDC 90~132VAC or 254~373VDC 180~264VAC or 254~373VDC VOLTAGE RANGE90~132VAC or 254~373VDC 180~264VAC or 254~373VDC 90~132VAC or 254~373VDC 180~264VAC or 254~373VDC
VOLTAGE RANGE90~132VAC or 254~373VDC 180~264VAC or 254~373VDC 90~132VAC or 254~373VDC 180~264VAC or 254~373VDC INPUT INPUT
INPUT FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.)
FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)
INRUSH CURRENT (Typ.) LEAKAGE CURRENT LEAKAGE CURRENT
LEAKAGE CURRENT 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 85% 85%
85% 3.0A/230VAC;5.0A/115VAC Cold start 90A/230VAC 3.0A/230VAC;5.0A/115VAC Cold start 90A/230VAC
3.0A/230VAC;5.0A/115VAC Cold start 90A/230VAC <1mA <1mA
<1mA86% 86%
86%OVERLOAD OVERLOAD
OVERLOAD A Type:105~170% rated output powerB Type:105~140% rated output power A Type:105~170% rated output powerB Type:105~140% rated output power
A Type:105~170% rated output powerB Type:105~140% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removedPROTECTION PROTECTION
PROTECTION SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed 4.7 ~ 5.7V 4.7 ~ 5.7V
4.7 ~ 5.7V 5.7 ~ 7.0V 5.7 ~ 7.0V
5.7 ~ 7.0VENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY & EMC SAFETY & EMC
SAFETY & EMC (Note 5) (Note 5)
(Note 5) OTHERS OTHERS
OTHERS OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY STORAGE TEMP., HUMIDITY
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Shut down O/P voltage, recovers automatically after temperature goes down Protection type : Shut down O/P voltage, recovers automatically after temperature goes down
Protection type : Shut down O/P voltage, recovers automatically after temperature goes down -20 ~ +70(Refer to "Derating Curve") -20 ~ +70(Refer to "Derating Curve")
-20 ~ +70(Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH -40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 60) 0.03%/ (0 ~ 60)
0.03%/ (0 ~ 60) 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1 approved UL60950-1 approved
UL60950-1 approved I/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVAC
I/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class A I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class A
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class A Refer to EN61000-4-5; light industry level (surge 4KV),criteria A Refer to EN61000-4-5; light industry level (surge 4KV),criteria A
Refer to EN61000-4-5; light industry level (surge 4KV),criteria A 226.4K hrs min.MIL-HDBK-217F (25) 226.4K hrs min.MIL-HDBK-217F (25)
226.4K hrs min.MIL-HDBK-217F (25) 210*81*31mm (L*W*H) 210*81*31mm (L*W*H)
210*81*31mm (L*W*H) 0.67kg; 20pcs/14.4kg/0.91CUFT 0.67kg; 20pcs/14.4kg/0.91CUFT
0.67kg; 20pcs/14.4kg/0.91CUFT NOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Please refer to"static characteristics". 2. Please refer to"static characteristics".
2. Please refer to"static characteristics". 3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : line regulation and load regulation. 4. Tolerance : line regulation and load regulation.
4. Tolerance : line regulation and load regulation. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.
5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 6. The powersupply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 6. The powersupply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
6. The powersupply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. EMC directives.
EMC directives.File Name:HSN-300-SPEC2014-12-09 File Name:HSN-300-SPEC2014-12-09
File Name:HSN-300-SPEC2014-12-09