HSN-200-5B MEANWELL 200W Single Output Switching Power Supply, 200W, 40A

200W Single Output Switching Power Supply 200W Single Output Switching Power Supply
200W Single Output Switching Power Supply HSN-200series HSN-200series
HSN-200seriesFeatures : Features :
Features : Low leakage current 1mA Low leakage current 1mA
Low leakage current 1mA Protections: Short circuit/ Overload / Over voltage/ Over temperature Protections: Short circuit/ Overload / Over voltage/ Over temperature
Protections: Short circuit/ Overload / Over voltage/ Over temperature Coolingby aluminum plate or the cabinet Coolingby aluminum plate or the cabinet
Coolingby aluminum plate or the cabinet Low profile:31mm Low profile:31mm
Low profile:31mm Conformal coated Conformal coated
Conformal coated LED indicator for power on LED indicator for power on
LED indicator for power on Low cost, high power reliability Low cost, high power reliability
Low cost, high power reliability 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test 2 years warranty 2 years warranty
2 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL DC VOLTAGE DC VOLTAGE
DC VOLTAGE HSN-200-4.2A HSN-200-4.2A
HSN-200-4.2A 4.2V 4.2V
4.2V HSN-200-4.2B HSN-200-4.2B
HSN-200-4.2B 4.2V 4.2V
4.2V HSN-200-5A HSN-200-5A
HSN-200-5A 5V 5V
5V HSN-200-5B HSN-200-5B
HSN-200-5B 5V 5V
5V RATED CURRENTNote.2 30A RATED CURRENTNote.2 30A
RATED CURRENTNote.2 30A 40A 40A
40A 30A 30A
30A 40A 40A
40A CURRENT RANGE CURRENT RANGE
CURRENT RANGE RATED POWER(convection) RATED POWER(convection)
RATED POWER(convection) 0 ~ 30A 0 ~ 30A
0 ~ 30A 126W 126W
126W 0 ~ 40A 0 ~ 40A
0 ~ 40A 168W 168W
168W 0 ~ 30A 0 ~ 30A
0 ~ 30A 150W 150W
150W 0 ~ 40A 0 ~ 40A
0 ~ 40A 200W 200W
200W RIPPLE & NOISE (max.) Note.3150mVp-p RIPPLE & NOISE (max.) Note.3150mVp-p
RIPPLE & NOISE (max.) Note.3150mVp-p 150mVp-p 150mVp-p
150mVp-p 150mVp-p 150mVp-p
150mVp-p 150mVp-p 150mVp-p
150mVp-p OUTPUT OUTPUT
OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4
VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 LINE REGULATION LINE REGULATION
LINE REGULATION LOAD REGULATION LOAD REGULATION
LOAD REGULATION 3.6~4.4V 3.6~4.4V
3.6~4.4V 2.0% 2.0%
2.0% 0.5% 0.5%
0.5% 2.0% 2.0%
2.0% 3.6~4.4V 3.6~4.4V
3.6~4.4V 2.0% 2.0%
2.0% 0.5% 0.5%
0.5% 2.0% 2.0%
2.0% 4.5~5.5V 4.5~5.5V
4.5~5.5V 2.0% 2.0%
2.0% 0.5% 0.5%
0.5% 2.0% 2.0%
2.0% 4.5~5.5V 4.5~5.5V
4.5~5.5V 2.0% 2.0%
2.0% 0.5% 0.5%
0.5% 2.0% 2.0%
2.0% SETUP, RISE TIME HOLD UP TIME (Typ.) SETUP, RISE TIME HOLD UP TIME (Typ.)
SETUP, RISE TIME HOLD UP TIME (Typ.) 1500ms, 100ms/230VAC2500ms, 100ms/115VAC 1500ms, 100ms/230VAC2500ms, 100ms/115VAC
1500ms, 100ms/230VAC2500ms, 100ms/115VAC 20ms/230VAC16ms/115VAC at full load 20ms/230VAC16ms/115VAC at full load
20ms/230VAC16ms/115VAC at full loadINPUT INPUT
INPUT VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) AC CURRENT (Typ.)
AC CURRENT (Typ.) 90~132VAC or 254~373VDC 90~132VAC or 254~373VDC
90~132VAC or 254~373VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 86.5% 86.5%
86.5% 3.0A/115VAC 2.5A/230VAC 3.0A/115VAC 2.5A/230VAC
3.0A/115VAC 2.5A/230VAC 180~264VAC or 254~373VDC 180~264VAC or 254~373VDC
180~264VAC or 254~373VDC88% 88%
88% 90~132VAC or254~373VDC 90~132VAC or254~373VDC
90~132VAC or254~373VDC86.5% 86.5%
86.5% 180~264VAC or 254~373VDC 180~264VAC or 254~373VDC
180~264VAC or 254~373VDC88% 88%
88% INRUSH CURRENT (Typ.) LEAKAGE CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT
INRUSH CURRENT (Typ.) LEAKAGE CURRENTOVERLOAD OVERLOAD
OVERLOAD COLD START <80A(twidth<1000s measured at 50% Ipeak) at 115/230VAC COLD START <80A(twidth<1000s measured at 50% Ipeak) at 115/230VAC
COLD START <80A(twidth<1000s measured at 50% Ipeak) at 115/230VAC <1mA <1mA
<1mA A Type:105~185% rated output powerB Type:105~140% rated output power A Type:105~185% rated output powerB Type:105~140% rated output power
A Type:105~185% rated output powerB Type:105~140% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removedPROTECTION PROTECTION
PROTECTION SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed 4.6 ~ 5.4V 4.6 ~ 5.4V
4.6 ~ 5.4V 5.7 ~ 7.0V 5.7 ~ 7.0V
5.7 ~ 7.0VENVIRONMENT ENVIRONMENT
ENVIRONMENT SAFETY & EMC SAFETY & EMC
SAFETY & EMC (Note 5) (Note 5)
(Note 5) OTHERS OTHERS
OTHERS OVER VOLTAGE OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY STORAGE TEMP., HUMIDITY
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed Shut down O/P voltage, recovers automatically after temperature goes down Shut down O/P voltage, recovers automatically after temperature goes down
Shut down O/P voltage, recovers automatically after temperature goes down -25 ~ +70(Refer to "Derating Curve") -25 ~ +70(Refer to "Derating Curve")
-25 ~ +70(Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH -40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 60) 0.03%/ (0 ~ 60)
0.03%/ (0 ~ 60) 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1 approved UL60950-1 approved
UL60950-1 approved I/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVAC
I/P-O/P:3.0KVAC I/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class A I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class A
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Refer to EN55022 (CISPR22) Class A Refer to EN61000-4-5; 4KV, criteria A Refer to EN61000-4-5; 4KV, criteria A
Refer to EN61000-4-5; 4KV, criteria A 283.069K hrs min.MIL-HDBK-217F (25) 283.069K hrs min.MIL-HDBK-217F (25)
283.069K hrs min.MIL-HDBK-217F (25) 210*62*31mm (L*W*H) 210*62*31mm (L*W*H)
210*62*31mm (L*W*H) 0.55kg; 20pcs/12kg/1.63CUFT 0.55kg; 20pcs/12kg/1.63CUFT
0.55kg; 20pcs/12kg/1.63CUFT NOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Please refer to"static characteristics". 2. Please refer to"static characteristics".
2. Please refer to"static characteristics". 3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : line regulation and load regulation. 4. Tolerance : line regulation and load regulation.
4. Tolerance : line regulation and load regulation. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.
5. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. EMC directives.
EMC directives.File Name:HSN-200-SPEC2014-12-09 File Name:HSN-200-SPEC2014-12-09
File Name:HSN-200-SPEC2014-12-09