150W Single Output LED Power SupplyHLG-120H-Cseries
150W Single Output LED Power SupplyHLG-120H-Cseries
150W Single Output LED Power SupplyHLG-120H-CseriesFeatures :
Features :
Features :
Constant currentdesign
Constant currentdesign
Constant currentdesign
Universal AC input / Full range (up to 305VAC)
Universal AC input / Full range (up to 305VAC)
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
Built-in active PFC function
Built-in active PFC function
High efficiency up to 94%
High efficiency up to 94%
High efficiency up to 94%
Protections: Short circuit / Over voltage/ Over temperature
Protections: Short circuit / Over voltage/ Over temperature
Protections: Short circuit / Over voltage/ Over temperature
Cooling by free air convection
Cooling by free air convection
Cooling by free air convection
Output currentadjustable throughoutput cableor internal potentiometer
Output currentadjustable throughoutput cableor internal potentiometer
Output currentadjustable throughoutput cableor internal potentiometer
IP67 / IP65 design for indoor or outdoorinstallations
IP67 / IP65 design for indoor or outdoorinstallations
IP67 / IP65 design for indoor or outdoorinstallations
Three in one dimming function (1=10Vdcor 10V PWM signal or resistance)
Three in one dimming function (1=10Vdcor 10V PWM signal or resistance)
Three in one dimming function (1=10Vdcor 10V PWM signal or resistance)
Suitable for dry / damp/ wet locations
Suitable for dry / damp/ wet locations
Suitable for dry / damp/ wet locations
7 years warranty (Note.5)
7 years warranty (Note.5)
7 years warranty (Note.5)F110
F110
F110MM IP65 IP67
MM IP65 IP67
MM IP65 IP67HLG-120H-C350 A
HLG-120H-C350 A
HLG-120H-C350 A
A : IP65 rated.Constant currentlevel can be adjusted throughinternal potentiometer.
A : IP65 rated.Constant currentlevel can be adjusted throughinternal potentiometer.
A : IP65 rated.Constant currentlevel can be adjusted throughinternal potentiometer.
B : IP67 rated. Constantcurrent level adjustablethrough output cable with 1=10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
B : IP67 rated. Constantcurrent level adjustablethrough output cable with 1=10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
B : IP67 rated. Constantcurrent level adjustablethrough output cable with 1=10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.SPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
HLG-120H-C350HLG-120H-C500HLG-120H-C700HLG-120H-C1050HLG-120H-C1400
HLG-120H-C350HLG-120H-C500HLG-120H-C700HLG-120H-C1050HLG-120H-C1400
HLG-120H-C350HLG-120H-C500HLG-120H-C700HLG-120H-C1050HLG-120H-C1400
RATED CURRENT
RATED CURRENT
RATED CURRENT
350mA
350mA
350mA
500mA700mA1050mA1400mA
500mA700mA1050mA1400mA
500mA700mA1050mA1400mA
CURRENT ACCURACY5.0%
CURRENT ACCURACY5.0%
CURRENT ACCURACY5.0%
CONSTANT CURRENT REGION Note.6 215 ~ 430V150V ~ 300V107V ~ 215V74V ~ 148V54V ~ 108V
CONSTANT CURRENT REGION Note.6 215 ~ 430V150V ~ 300V107V ~ 215V74V ~ 148V54V ~ 108V
CONSTANT CURRENT REGION Note.6 215 ~ 430V150V ~ 300V107V ~ 215V74V ~ 148V54V ~ 108V
RATED POWER RIPPLE CURRENT
RATED POWER RIPPLE CURRENT
RATED POWER RIPPLE CURRENT
150.5W
150.5W
150.5W
5%
5%
5%
150W150.5W 155.4W 151.2W
150W150.5W 155.4W 151.2W
150W150.5W 155.4W 151.2W
OUTPUT
OUTPUT
OUTPUT
RIPPLE & NOISE 2Vp-p1.5Vp-p1Vp-p1Vp-p1Vp-p
RIPPLE & NOISE 2Vp-p1.5Vp-p1Vp-p1Vp-p1Vp-p
RIPPLE & NOISE 2Vp-p1.5Vp-p1Vp-p1Vp-p1Vp-p
Can be adjusted by internal potentiometer (A type only)
Can be adjusted by internal potentiometer (A type only)
Can be adjusted by internal potentiometer (A type only)
CURRENT ADJ. RANGE
CURRENT ADJ. RANGE
CURRENT ADJ. RANGE
175 ~ 350mA 250 ~ 500mA
175 ~ 350mA 250 ~ 500mA
175 ~ 350mA 250 ~ 500mA
350 ~ 700mA
350 ~ 700mA
350 ~ 700mA
525 ~ 1050mA
525 ~ 1050mA
525 ~ 1050mA
700 ~ 1400mA
700 ~ 1400mA
700 ~ 1400mA
LINE REGULATION1%
LINE REGULATION1%
LINE REGULATION1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
SETUP, RISE TIME HOLD UP TIME (Typ.)
SETUP, RISE TIME HOLD UP TIME (Typ.)
SETUP, RISE TIME HOLD UP TIME (Typ.)
1000ms, 80ms / 115VAC at full load500ms, 80ms / 230VAC at full load
1000ms, 80ms / 115VAC at full load500ms, 80ms / 230VAC at full load
1000ms, 80ms / 115VAC at full load500ms, 80ms / 230VAC at full load
16ms at full load 230VAC / 115VAC
16ms at full load 230VAC / 115VAC
16ms at full load 230VAC / 115VAC
VOLTAGE RANGE Note.2 90 ~ 305VAC127VDC ~ 431VDC
VOLTAGE RANGE Note.2 90 ~ 305VAC127VDC ~ 431VDC
VOLTAGE RANGE Note.2 90 ~ 305VAC127VDC ~ 431VDC
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63Hz
PF>0.98/115VAC, PF>0.96/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
PF>0.98/115VAC, PF>0.96/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
PF>0.98/115VAC, PF>0.96/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)INPUT
INPUT
INPUT
TOTAL HARMONIC DISTORTION THD< 20% when output loading50% at 115VAC/230VAC input and output loading75% at 277VAC input
TOTAL HARMONIC DISTORTION THD< 20% when output loading50% at 115VAC/230VAC input and output loading75% at 277VAC input
TOTAL HARMONIC DISTORTION THD< 20% when output loading50% at 115VAC/230VAC input and output loading75% at 277VAC input
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
94%
94%
94%
94%
94%
94%
94%
94%
94%
94%
94%
94%
93.5%
93.5%
93.5%
AC CURRENT (Typ.) INRUSH CURRENT (Typ.)
AC CURRENT (Typ.) INRUSH CURRENT (Typ.)
AC CURRENT (Typ.) INRUSH CURRENT (Typ.)
MAX. No. of PSUs on 16A
MAX. No. of PSUs on 16A
MAX. No. of PSUs on 16A
1.6A / 115VAC 0.8 A / 230VAC 0.7A / 277VAC COLD START 50A(twidth=600s measured at 50% Ipeak) at 230VAC
1.6A / 115VAC 0.8 A / 230VAC 0.7A / 277VAC COLD START 50A(twidth=600s measured at 50% Ipeak) at 230VAC
1.6A / 115VAC 0.8 A / 230VAC 0.7A / 277VAC COLD START 50A(twidth=600s measured at 50% Ipeak) at 230VAC
CIRCUIT BREAKER 4 units (circuit breaker of type B) / 6 units(circuit breaker of type C) at 230VAC
CIRCUIT BREAKER 4 units (circuit breaker of type B) / 6 units(circuit breaker of type C) at 230VAC
CIRCUIT BREAKER 4 units (circuit breaker of type B) / 6 units(circuit breaker of type C) at 230VAC
LEAKAGE CURRENT SHORT CIRCUIT
LEAKAGE CURRENT SHORT CIRCUIT
LEAKAGE CURRENT SHORT CIRCUIT
<0.75mA / 277VAC
<0.75mA / 277VAC
<0.75mA / 277VAC
Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
475 ~ 495V
475 ~ 495V
475 ~ 495V
335 ~ 355V
335 ~ 355V
335 ~ 355V
240 ~ 260V
240 ~ 260V
240 ~ 260V
165 ~ 175V
165 ~ 175V
165 ~ 175V
120 ~ 130V
120 ~ 130V
120 ~ 130V
PROTECTION
PROTECTION
PROTECTION
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
OVER VOLTAGE
OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP.
OVER TEMPERATURE WORKING TEMP.
OVER TEMPERATURE WORKING TEMP.
WORKING HUMIDITY
WORKING HUMIDITY
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT
VIBRATION
VIBRATION
VIBRATION
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down
-40 ~ +70c (Refer to "Derating Curve")
-40 ~ +70c (Refer to "Derating Curve")
-40 ~ +70c (Refer to "Derating Curve")
10 ~ 95% RH non-condensing
10 ~ 95% RH non-condensing
10 ~ 95% RH non-condensing
-40 ~ +80c, 10 ~ 95% RH
-40 ~ +80c, 10 ~ 95% RH
-40 ~ +80c, 10 ~ 95% RH
0.03%/c (0 ~ 50c)
0.03%/c (0 ~ 50c)
0.03%/c (0 ~ 50c)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.12-13, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP65 or IP67, J61347-1, J61347-2-13 approved
SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.12-13, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP65 or IP67, J61347-1, J61347-2-13 approved
SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.12-13, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP65 or IP67, J61347-1, J61347-2-13 approvedSAFETY & EMC
SAFETY & EMC
SAFETY & EMCOTHERS
OTHERS
OTHERS
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
PACKING
PACKING
PACKING
I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH
Compliance to EN55015, EN61000-3-2 Class C (50% load) ; EN61000-3-3
Compliance to EN55015, EN61000-3-2 Class C (50% load) ; EN61000-3-3
Compliance to EN55015, EN61000-3-2 Class C (50% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge L,N-FG: 4KV), criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge L,N-FG: 4KV), criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge L,N-FG: 4KV), criteria A
191.1K hrs min.MIL-HDBK-217F (25c)
191.1K hrs min.MIL-HDBK-217F (25c)
191.1K hrs min.MIL-HDBK-217F (25c)
220*68*38.8mm (L*W*H)
220*68*38.8mm (L*W*H)
220*68*38.8mm (L*W*H)
1.04Kg; 12pcs/13.5Kg/0.8CUFT
1.04Kg; 12pcs/13.5Kg/0.8CUFT
1.04Kg; 12pcs/13.5Kg/0.8CUFTNOTE
NOTE
NOTE
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25c of ambient temperature.
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25c of ambient temperature.
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25c of ambient temperature.
2. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.
2. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.
2. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.
3. Safetyand EMC design refer to EN60598-1, CNS15233, GB7000.1.
3. Safetyand EMC design refer to EN60598-1, CNS15233, GB7000.1.
3. Safetyand EMC design refer to EN60598-1, CNS15233, GB7000.1.
4. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
4. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
4. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
5. Referto warrantystatement.
5. Referto warrantystatement.
5. Referto warrantystatement.
6. Please refer to "DRIVING METHODS OF LED MODULE".
6. Please refer to "DRIVING METHODS OF LED MODULE".
6. Please refer to "DRIVING METHODS OF LED MODULE".
7. To fulfill requirements of the latestErP regulation for lighting fixtures, this LED power supply canonly be used behinda switch without permanently connected to the mains.
7. To fulfill requirements of the latestErP regulation for lighting fixtures, this LED power supply canonly be used behinda switch without permanently connected to the mains.
7. To fulfill requirements of the latestErP regulation for lighting fixtures, this LED power supply canonly be used behinda switch without permanently connected to the mains.
File Name:HLG-120H-C-SPEC2015-07-23
File Name:HLG-120H-C-SPEC2015-07-23
File Name:HLG-120H-C-SPEC2015-07-23