KAA-4R4V MEANWELL 4-fold Universal Switching Actuator, 16A per channel

Actuator and regulator 0-10V KNX 4-channel.

Functions of scenes and time programmable.

Format to install on a Din rail.

Self-powered from the bux KNX (21-31V)

Consumption of entry to <250mW.

4 relay outputs 10 Amps per channeland4 outputs 0-10V.

Maximum capacitive load per output 220µF.

Voltage relay 230vac 50Hz.

Maximum currenttotal output40A.

Mechanical life operating>10^Six.

Curve linear dimming or logarithmic programmable with software ETS.

Function of time and scenes are programmable.

Button for programming individial address.

Working temperature: from-30ºCup+45 ° Cof ambient temperature.

Dimensions (Width x Height x depth):72 x 90 x 57mm. 4UWidth Din rail.

3 years warranty.

Manufacturer: MEAN WELL.

CLICK VIDEO KAA-4R4V KNX.

The KAA is, the actuator 4 channels (relays) for all types of loads inductive or capacitive load such as motors and blinds. Ideal for control of intelligent buildings, automation, lighting, blinds, heating. In addition, the 4 analog outputs of 0-10V which allows you to regulate any driver that supports a signal of 0-10V. If the computers do not allow the power off of output by regulating teams (1-10V) we can use the relay outputs to disconnect the supply of such equipment.

Suitable for all types of LED drivers from MEAN WELL. In the product data sheet indicates the maximum number of LED drivers recommended by channel, which facilitates the planning of the building.

The curve linear dimming or logarithmic is programmable through the software ETS during the planning or the use. It also has a manual option via a push button on the panel. You can schedule the time functions and scenes. It incorporates an LED indicator for each channel. With a compact design for installation in the box on a DIN rail with a width of only 4 units 72mm. Suitable for panels EIB and KNX.