SCW12C-15 MEANWELL DC-DC Converter for PCB mount, Input 36-72VDC, Output 15VDC / 800mA, DIP Through hole pac..

12W DC-DC Regulated Single Output Converter SCW12series 12W DC-DC Regulated Single Output Converter SCW12series
12W DC-DC Regulated Single Output Converter SCW12series SPECIFICATION SPECIFICATION
SPECIFICATION ORDER NO. ORDER NO.
ORDER NO. Features : Features :
Features : 2:1 wide input range 2:1 wide input range
2:1 wide input range 1500VDC l/O isolation 1500VDC l/O isolation
1500VDC l/O isolation Built-in remote ON/OFF control Built-in remote ON/OFF control
Built-in remote ON/OFF control Built-in EMl filter Built-in EMl filter
Built-in EMl filter Protections: short circuit / Overload Protections: short circuit / Overload
Protections: short circuit / Overload Cooling by free air convection Cooling by free air convection
Cooling by free air convection Five-sided shield metal Five-sided shield metal
Five-sided shield metal 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Low cost / High reliability Low cost / High reliability
Low cost / High reliability Modified models available: output 2.5 V/3.3 V Modified models available: output 2.5 V/3.3 V
Modified models available: output 2.5 V/3.3 V 2 years warranty 2 years warranty
2 years warranty SCW12A-05 SCW12B-05 SCW12C-05 SCW12A-12 SCW12B-12 SCW12C-12 SCW12A-15 SCW12B-15 SCW12C-15 SCW12A-05 SCW12B-05 SCW12C-05 SCW12A-12 SCW12B-12 SCW12C-12 SCW12A-15 SCW12B-15 SCW12C-15
SCW12A-05 SCW12B-05 SCW12C-05 SCW12A-12 SCW12B-12 SCW12C-12 SCW12A-15 SCW12B-15 SCW12C-15 DC VOLTAGE5V DC VOLTAGE5V
DC VOLTAGE5V 12V15V 12V15V
12V15V CURRENT RANGE CURRENT RANGE
CURRENT RANGE RATED POWER RATED POWER
RATED POWER 480 ~ 2400mA 200 ~ 1000mA 160 ~ 800mA 480 ~ 2400mA 200 ~ 1000mA 160 ~ 800mA
480 ~ 2400mA 200 ~ 1000mA 160 ~ 800mA 12W 12W
12WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.250mVp-p60mVp-p60mVp-p RIPPLE & NOISE (max.) Note.250mVp-p60mVp-p60mVp-p
RIPPLE & NOISE (max.) Note.250mVp-p60mVp-p60mVp-p LINE REGULATIONNote.30.5% LINE REGULATIONNote.30.5%
LINE REGULATIONNote.30.5% LOAD REGULATIONNote.40.5% LOAD REGULATIONNote.40.5%
LOAD REGULATIONNote.40.5% VOLTAGE ACCURACY SWITCHING FREQUENCY VOLTAGE ACCURACY SWITCHING FREQUENCY
VOLTAGE ACCURACY SWITCHING FREQUENCY 2.0% 2.0%
2.0% 400KHzmin. 400KHzmin.
400KHzmin. EXTERNAL CAPACITANCE LOAD (max.) 1000uF220uF220uF EXTERNAL CAPACITANCE LOAD (max.) 1000uF220uF220uF
EXTERNAL CAPACITANCE LOAD (max.) 1000uF220uF220uF VOLTAGE RANGE EFFICIENCY (Typ.) VOLTAGE RANGE EFFICIENCY (Typ.)
VOLTAGE RANGE EFFICIENCY (Typ.) A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC
A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC 82% 83% 84% 82% 83% 83% 82% 85% 83% 82% 83% 84% 82% 83% 83% 82% 85% 83%
82% 83% 84% 82% 83% 83% 82% 85% 83%INPUT INPUT
INPUT DC CURRENT FILTER DC CURRENT FILTER
DC CURRENT FILTER Full load Full load
Full load Does not load Does not load
Does not load Pinetwork Pinetwork
Pinetwork R: 1245mA B: 625mAC: 320mA A: 70mA B: 35mAC: 25mA R: 1245mA B: 625mAC: 320mA A: 70mA B: 35mAC: 25mA
R: 1245mA B: 625mAC: 320mA A: 70mA B: 35mAC: 25mA Fuse PROTECTION recommended Fuse PROTECTION recommended
Fuse PROTECTION recommended 110 ~ 180%rated output power 110 ~ 180%rated output power
110 ~ 180%rated output powerPROTECTION PROTECTION
PROTECTION (Note. 5) (Note. 5)
(Note. 5) ENVIRONMENT ENVIRONMENT
ENVIRONMENTSAFETY SECURITY
SECURITY OTHER OTHER
OTHER The OVERHEAD of The OVERHEAD of
OVERLOADSHORT CIRCUIT WORKING TEMP. SHORT CIRCUIT WORKING TEMP.
SHORT CIRCUIT WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION RESISTANCE TO STRESS RESISTANCE TO STRESS
RESISTANCE TO STRESS ISOLATION RESISTANCE ISOLATION CAPACITANCE EMC EMISSION ISOLATION RESISTANCE ISOLATION CAPACITANCE EMC EMISSION
ISOLATION RESISTANCE ISOLATION CAPACITANCE EMC EMISSION EMC IMMUNITY EMC IMMUNITY
EMC IMMUNITY REMOTE CONTROL MTBF REMOTE CONTROL MTBF
REMOTE CONTROL MTBF DIMENSION DIMENSION
DIMENSION WEIGHT WEIGHT
WEIGHT Protection type :Hiccup mode, recovers automatically after fault condition is removed Protection type :Hiccup mode, recovers automatically after fault condition is removed
Protection type :Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit All output equipped with short circuit
All output equipped with short circuit Protection type :Hiccup mode, recovers automatically after fault condition is removed Protection type :Hiccup mode, recovers automatically after fault condition is removed
Protection type :Hiccup mode, recovers automatically after fault condition is removed -40 ~ +71 (Refer to "Reduction Curve") -40 ~ +71 (Refer to "Reduction Curve")
-40 ~ +71 (Refer to "Reduction Curve") 20% ~ 90%RHnon-condensing 20% ~ 90%RHnon-condensing
20% ~ 90%RHnon-condensing -40 ~ +105, 10 ~ 95% RH -40 ~ +105, 10 ~ 95% RH
-40 ~ +105, 10 ~ 95% RH 0.05% /(0 ~ 50) 0.05% /(0 ~ 50)
0.05% /(0 ~ 50) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60 min. eachalongX, y, Z axes 10 ~ 500Hz, 2G 10min./1 cycle, period for 60 min. eachalongX, y, Z axes
10 ~ 500Hz, 2G 10min./1 cycle, period for 60 min. eachalongX, y, Z axes I/P-O/P:1.5 KVDC I/P-O/P:1.5 KVDC
I/P-O/P:1.5 KVDC I/P-O/P: 100M Ohms / 500VDC / 25/ 70% RH I/P-O/P: 100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P: 100M Ohms / 500VDC / 25/ 70% RH 2200pFmax. 2200pFmax.
2200pFmax. Compliance to EN55022 Class a, FCC part 15 Class a Compliance to EN55022 Class a, FCC part 15 Class a
Compliance to EN55022 Class a, FCC part 15 Class a Compliance to EN61000-4-2,3,4,5,6,8 light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8 light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8 light industry level,criteria A POWER: reinforced concrete ~ - Vin > 4v dc or open ; OFF: reinforced concrete ~ -Vin < 1vdc or short POWER: reinforced concrete ~ - Vin > 4v dc or open ; OFF: reinforced concrete ~ -Vin < 1vdc or short
POWER: reinforced concrete ~ - Vin > 4v dc or open ; OFF: reinforced concrete ~ -Vin < 1vdc or short 600Khrs min.MIL-HDBK-217F(25) 600Khrs min.MIL-HDBK-217F(25)
600Khrs min.MIL-HDBK-217F(25) 31.8*20.3*12.2 mm or 1.25"*0.80"*0.48 " (L*W*H) 31.8*20.3*12.2 mm or 1.25"*0.80"*0.48 " (L*W*H)
31.8*20.3*12.2 mm or 1.25"*0.80"*0.48 " (L*W*H) 18.5 g 18.5 g
18.5 gMechanical Specification Mechanical Specification
Mechanical Specification Unit:mm(in.) Unit:mm(in.)
Unit:mm(in.) Pin Configuration Of The Curve Of Reduction Of Power Pin Configuration Of The Curve Of Reduction Of Power
Pin Configuration Of The Curve Of Reduction Of Power 20.3(0.80) 20.3(0.80)
20.3(0.80) 0.6 + 0.2/-0 0.6 + 0.2/-0
0.6 + 0.2/-0 2.54(0.10) 2.54(0.10)
2.54(0.10) 3.81(0.15) 3.81(0.15)
3.81(0.15) P i n n or . Output P i n n or . Output
P i n n or . Output 100 100
One hundred 1 1
One 23 2 23 2
23 2 22 3 22 3
22 3BOTTOMVIEW BOTTOMVIEW
BOTTOMVIEW169 169
One million six hundred ninety one thousand four hundred eleven 1411
141115.24(0.60) 15.24(0.60)
15.24(0.60)2.54(0.10) 2.54(0.10)
2.54(0.10) 5.08(0.20) 5.08(0.20)
5.08(0.20) SIDE VIEW SIDE VIEW
SIDE VIEW 12.2(0.48) 12.2(0.48)
12.2(0.48) 1 1
One 2 & 3 2 & 3
2 & 3 9 9
Nine 11 11
Eleven 14 14
Fourteen 16 16
Sixteen 2 2 and 2 3 2 2 and 2 3
2 2 and 2 3 Reinforced concrete Reinforced concrete
Reinforced concrete -V-in N. C. N. C. -V-in N. C. N. C.
-V-in N. C. N. C. +V +V
+V -V -V
-V +V i n +V i n
+V i n 60 60
Sixty -40 0 2550 6071 -40 0 2550 6071
-40 0 2550 6071Ta () Ta ()
Ta ()100 100
100NOTE NOTE
NOTE 1.All parameters are specified at normal input, ratedload, from 25 to 70% relative humidity environment. 1.All parameters are specified at normal input, ratedload, from 25 to 70% relative humidity environment.
1.All parameters are specified at normal input, ratedload, from 25 to 70% relative humidity environment. 2.Curly and noiseare measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 2.Curly and noiseare measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
2.Curly and noiseare measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 3.Line regulation is measured from low line to high line at ratedload. 3.Line regulation is measured from low line to high line at ratedload.
3.Line regulation is measured from low line to high line at ratedload. 4.Loadregulation is measured from 20% to 100% ratedload. 4.Loadregulation is measured from 20% to 100% ratedload.
4.Loadregulation is measured from 20% to 100% ratedload. 5.Please prevent the converter from operating in overload or short circuit conditionfor more than30 seconds. 5.Please prevent the converter from operating in overload or short circuit conditionfor more than30 seconds.
5.Please prevent the converter from operating in overload or short circuit conditionfor more than30 seconds.File name:SCW12-SPEC 2014-08-13 File name:SCW12-SPEC 2014-08-13
File name:SCW12-SPEC 2014-08-13