RPS-60-3.3 MEANWELL AC-DC Open frame Medical power supply, Output 3.3VDC / 10A, EN60601 2xMOPP, compact size..

60W Single Output Medical TypeRPS-60series 60W Single Output Medical TypeRPS-60series
60W Single Output Medical TypeRPS-60series Features : Features :
Features : 4"x2"miniature size 4"x2"miniature size
4"x2"miniature size Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Low leakagecurrent<100 Low leakagecurrent<100
Low leakagecurrent<100 Protections: short circuit / Overload/ Over voltage Protections: short circuit / Overload/ Over voltage
Protections: short circuit / Overload/ Over voltage Cooling by free air convection Cooling by free air convection
Cooling by free air convection Medical safety approved (2 x MOPPbetweenprimaryto secondary) Medical safety approved (2 x MOPPbetweenprimaryto secondary)
Medical safety approved (2 x MOPPbetweenprimaryto secondary) UL60950-1/IEC60950-1/EN60950-1 ITE safety approved UL60950-1/IEC60950-1/EN60950-1 ITE safety approved
UL60950-1/IEC60950-1/EN60950-1 ITE safety approved No load power consumption<0.75 W No load power consumption<0.75 W
No load power consumption<0.75 W Fixed switch frequency 100KHz Fixed switch frequency 100KHz
Fixed switch frequency 100KHz Suitable for BF application with appropriate systemconsideration Suitable for BF application with appropriate systemconsideration
Suitable for BF application with appropriate systemconsideration 3 years warranty 3 years warranty
3 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION MODEL RPS-60-3.3 MODEL RPS-60-3.3
MODEL RPS-60-3.3 RPS-60-5 RPS-60-5
RPS-60-5 RPS-60-12 RPS-60-12
RPS-60-12 .. ..
.. RPS-60-15RPS-60-24RPS-60-48 RPS-60-15RPS-60-24RPS-60-48
RPS-60-15RPS-60-24RPS-60-48 DC VOLTAGE RATED CURRENT CURRENT RANGE DC VOLTAGE RATED CURRENT CURRENT RANGE
DC VOLTAGE RATED CURRENT CURRENT RANGE 3.3 V 3.3 V
3.3 V 10A 10A
10A 0 ~ 11A 0 ~ 11A
0 ~ 11A 5V 5V
5V 10A 10A
10A 0 ~ 11A 0 ~ 11A
0 ~ 11A 12V 12V
12V 5A 5A
5A 0 ~ 5.5 A 0 ~ 5.5 A
0 ~ 5.5 A 15V24V48V 15V24V48V
15V24V48V 4A2.5A 1.25 A 4A2.5A 1.25 A
4A2.5A 1.25 A 0 ~ 4.4A0 ~ 2.75A0 ~ 1.375 A 0 ~ 4.4A0 ~ 2.75A0 ~ 1.375 A
0 ~ 4.4A0 ~ 2.75A0 ~ 1.375 A RATED POWER RATED POWER
RATED POWER 33W 33W
33W 50W 50W
50W 60W 60W
60W 60W 60W
60W 60W 60W
60W 60W 60W
60W Maximum LOAD(10 sec.) Note.436.3 W Maximum LOAD(10 sec.) Note.436.3 W
Maximum LOAD(10 sec.) Note.436.3 W 55W 55W
55W 66W 66W
66W 66W 66W
66W 66W 66W
66W 66W 66W
66WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2 80mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p
RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 80mVp-p
80mVp-p 120mVp-p 120mVp-p
120mVp-p 150mVp-p 240mVp-p 300mVp-p 150mVp-p 240mVp-p 300mVp-p
150mVp-p 240mVp-p 300mVp-p VOLTAGE ADJ. RANGE of VOLTAGE ADJ. RANGE of
VOLTAGE ADJ. RANGE of 3.1 ~ 3.6 V 3.1 ~ 3.6 V
3.1 ~ 3.6 V 4.75 ~ 5.5 V 4.75 ~ 5.5 V
4.75 ~ 5.5 V 11.4 ~ 13.2 V 11.4 ~ 13.2 V
11.4 ~ 13.2 V 13.5 ~ 16.5 V 22.8 ~ 27.6 V 45.6 ~ 52.8 V 13.5 ~ 16.5 V 22.8 ~ 27.6 V 45.6 ~ 52.8 V
13.5 ~ 16.5 V 22.8 ~ 27.6 V 45.6 ~ 52.8 V VOLTAGE TOLERANCE Note.32.0% VOLTAGE TOLERANCE Note.32.0%
VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 0.5% 0.5%
0.5% 1.0% 1.0%
1.0% 0.5% 0.5%
0.5% 1.0% 1.0%
1.0% 0.5% 0.5%
0.5% 1.0% 1.0%
1.0% 0.5% 0.5%
0.5% 1.0% 1.0%
1.0% 0.5% 0.5%
0.5% 1.0% 1.0%
1.0% 0.5% 0.5%
0.5% 1.0% 1.0%
1.0% SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE
SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load 50ms/230VAC12ms/115VAC at full load 50ms/230VAC12ms/115VAC at full load
50ms/230VAC12ms/115VAC at full load 90 ~ 264VAC 127 ~ 370VDC 90 ~ 264VAC 127 ~ 370VDC
90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63HzINPUT INPUT
INPUT EFFICIENCY (Typ.) EFFICIENCY (Typ.)
EFFICIENCY (Typ.) 74% 74%
74% 79% 79%
79% 83% 83%
83% 84% 85% 86% 84% 85% 86%
84% 85% 86%PROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT AC CURRENT (Typ.) AC CURRENT (Typ.)
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) The LEAKAGE CURRENTNote.8 INRUSH CURRENT (Typ.) The LEAKAGE CURRENTNote.8
INRUSH CURRENT (Typ.) The LEAKAGE CURRENTNote.8OVER LOAD OVER LOAD
OVER LOAD OVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS 1.8 A/115VAC 1 A/230VAC 1.8 A/115VAC 1 A/230VAC
1.8 A/115VAC 1 A/230VAC COLD START 60A/230VAC 30A/115VAC COLD START 60A/230VAC 30A/115VAC
COLD START 60A/230VAC 30A/115VAC Earth leakage current < 150 a/264VAC , Touch current < 100 a/264VAC Earth leakage current < 150 a/264VAC , Touch current < 100 a/264VAC
Earth leakage current < 150 a/264VAC , Touch current < 100 a/264VAC 115 ~ 150% rated output power 115 ~ 150% rated output power
115 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 5V5.75 ~ 6.75 13.8 V ~ 16.2 V 17.25 ~ 20.25 V 28.4 ~ 32.4 V 55.2 ~ 64.8 V Protection type :Shut down o/p voltage, re-power on to recover 3.8 ~ 5V5.75 ~ 6.75 13.8 V ~ 16.2 V 17.25 ~ 20.25 V 28.4 ~ 32.4 V 55.2 ~ 64.8 V Protection type :Shut down o/p voltage, re-power on to recover
3.8 ~ 5V5.75 ~ 6.75 13.8 V ~ 16.2 V 17.25 ~ 20.25 V 28.4 ~ 32.4 V 55.2 ~ 64.8 V Protection type :Shut down o/p voltage, re-power on to recover -20 ~ +70c (Refer to "Reduction Curve") -20 ~ +70c (Refer to "Reduction Curve")
-20 ~ +70c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH -40 ~ +85℃, 10 ~ 95% RH
-40 ~ +85℃, 10 ~ 95% RH 0.03%/c (0 ~ 45 ° c) 0.03%/c (0 ~ 45 ° c)
0.03%/c (0 ~ 45 ° c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved
UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved SECURITY and SECURITY and
SECURITY and ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP
ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP EMC EMC
EMC RESISTANCE TO STRESS RESISTANCE TO STRESS
RESISTANCE TO STRESS I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5 KVAC I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5 KVAC
I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5 KVAC (Note 5) (Note 5)
(Note 5) INSULATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25c/ 70% RH INSULATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25c/ 70% RH
INSULATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25c/ 70% RH OTHER OTHER
OTHER EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC EMISSION EMC IMMUNITY MTBF DIMENSION
EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A 353.6 K hrs min.MIL-HDBK-217F (25c) 353.6 K hrs min.MIL-HDBK-217F (25c)
353.6 K hrs min.MIL-HDBK-217F (25c) 101.6*50.8*29 mm (L*W*H) 101.6*50.8*29 mm (L*W*H)
101.6*50.8*29 mm (L*W*H) 0.15 Kg; 96pcs/15.4 Kg/0.89 CUFT 0.15 Kg; 96pcs/15.4 Kg/0.89 CUFT
0.15 Kg; 96pcs/15.4 Kg/0.89 CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 33% duty cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower. 4. 33% duty cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower.
4. 33% duty cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) 6. Lengthof set up time is measured at cold first start.Turn on/OFF the power supply may lead to increase of the start-up time. 6. Lengthof set up time is measured at cold first start.Turn on/OFF the power supply may lead to increase of the start-up time.
6. Lengthof set up time is measured at cold first start.Turn on/OFF the power supply may lead to increase of the start-up time. 7. Heat sink HS1,HS2 can not be shorted. 7. Heat sink HS1,HS2 can not be shorted.
7. Heat sink HS1,HS2 can not be shorted. 8. Touch currentwas measured from the main entrance to the DC output. 8. Touch currentwas measured from the main entrance to the DC output.
8. Touch currentwas measured from the main entrance to the DC output.File name:RPS-60-SPEC2015-07-17 File name:RPS-60-SPEC2015-07-17
File name:RPS-60-SPEC2015-07-17