MPS-65-3.3 MEANWELL AC-DC Single output Medical Open frame power supply, Output 3.3VDC / 12A, 2xMOPP

65W Single Output Medical Type MPS-65series 65W Single Output Medical Type MPS-65series
65W Single Output Medical Type MPS-65series Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Low leakage current<250 a Low leakage current<250 a
Low leakage current<250 a Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Cooling by free air convection Cooling by free air convection
Cooling by free air convection Medical safetyapproved (2 x MOPP between primary to secondary) Medical safetyapproved (2 x MOPP between primary to secondary)
Medical safetyapproved (2 x MOPP between primary to secondary) 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Fixed switching frequency at 45KHz Fixed switching frequency at 45KHz
Fixed switching frequency at 45KHz 3 years warranty 3 years warranty
3 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL DC VOLTAGE RATED CURRENT RANGE RATED POWER DC VOLTAGE RATED CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT RANGE RATED POWER OUTPUT POWER (max.) OUTPUT POWER (max.)
OUTPUT POWER (max.) MPS-65-3.3 MPS-65-5 MPS-65-7.5 MPS-65-12 MPS-65-13.5 MPS-65-15 MPS-65-24 MPS-65-27 MPS-65-48 MPS-65-3.3 MPS-65-5 MPS-65-7.5 MPS-65-12 MPS-65-13.5 MPS-65-15 MPS-65-24 MPS-65-27 MPS-65-48
MPS-65-3.3 MPS-65-5 MPS-65-7.5 MPS-65-12 MPS-65-13.5 MPS-65-15 MPS-65-24 MPS-65-27 MPS-65-48 3.3V5V 7.5V12V 13.5V15V 24V 27V 48V 3.3V5V 7.5V12V 13.5V15V 24V 27V 48V
3.3V5V 7.5V12V 13.5V15V 24V 27V 48V 12A 12A 8A 5.2A4.7A4.2A2.7A2.4A1.35A 12A 12A 8A 5.2A4.7A4.2A2.7A2.4A1.35A
12A 12A 8A 5.2A4.7A4.2A2.7A2.4A1.35A 0 ~ 15.2A0 ~ 13.8A0 ~ 9.6A0 ~ 6A 0 ~ 5.4A0 ~ 4.8A0 ~ 3A 0 ~ 2.7A0 ~ 1.5 TO 0 ~ 15.2A0 ~ 13.8A0 ~ 9.6A0 ~ 6A 0 ~ 5.4A0 ~ 4.8A0 ~ 3A 0 ~ 2.7A0 ~ 1.5 TO
0 ~ 15.2A0 ~ 13.8A0 ~ 9.6A0 ~ 6A 0 ~ 5.4A0 ~ 4.8A0 ~ 3A 0 ~ 2.7A0 ~ 1.5 TO 39.6 W 60W60W62.4W 63.45 W 63W64.8W 64.8 W 64.8 W 39.6 W 60W60W62.4W 63.45 W 63W64.8W 64.8 W 64.8 W
39.6 W 60W60W62.4W 63.45 W 63W64.8W 64.8 W 64.8 W 72W(+3.3 V:50W;+5V:69W)with 18CFM min. Convection forced air 72W(+3.3 V:50W;+5V:69W)with 18CFM min. Convection forced air
72W(+3.3 V:50W;+5V:69W)with 18CFM min. Convection forced air OUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.280mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p RIPPLE & NOISE (max.) Note.280mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p
RIPPLE & NOISE (max.) Note.280mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p VOLTAGE ADJ. RANGE 2.97 ~ 3.63 4.5 V ~ 5.5 V 6.75 ~ 8.25 10.8 V ~ 13.2 V 12.2 ~ 14.85 V 13.5 ~ 16.5V21.6 ~ 26.4 V 24.3 ~ 29.7V43.2 ~ 52.8 V VOLTAGE ADJ. RANGE 2.97 ~ 3.63 4.5 V ~ 5.5 V 6.75 ~ 8.25 10.8 V ~ 13.2 V 12.2 ~ 14.85 V 13.5 ~ 16.5V21.6 ~ 26.4 V 24.3 ~ 29.7V43.2 ~ 52.8 V
VOLTAGE ADJ. RANGE 2.97 ~ 3.63 4.5 V ~ 5.5 V 6.75 ~ 8.25 10.8 V ~ 13.2 V 12.2 ~ 14.85 V 13.5 ~ 16.5V21.6 ~ 26.4 V 24.3 ~ 29.7V43.2 ~ 52.8 V VOLTAGE TOLERANCE Note.33.0%3.0%3.0%2.0% VOLTAGE TOLERANCE Note.33.0%3.0%3.0%2.0%
VOLTAGE TOLERANCE Note.33.0%3.0%3.0%2.0% 2.0%2.0% 2.0%2.0%
2.0%2.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% LINE REGULATION LINE REGULATION
LINE REGULATION 1.0%1.0%1.0%1.0%1.0%1.0%1.0%1.0%1.0% 1.0%1.0%1.0%1.0%1.0%1.0%1.0%1.0%1.0%
1.0%1.0%1.0%1.0%1.0%1.0%1.0%1.0%1.0% LOAD REGULATION LOAD REGULATION
LOAD REGULATION 3.0%3.0%3.0% 3.0%3.0%3.0%
3.0%3.0%3.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0% 2.0% 2.0%
2.0%INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.)
SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT Note.7 AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT Note.7
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT Note.7OVERLOAD The OVERHEAD of
OVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of The VIBRATION The VIBRATION
The VIBRATION Around 800ms, 30ms/230VAC around 800ms, 30ms/115VAC at full load Around 800ms, 30ms/230VAC around 800ms, 30ms/115VAC at full load
Around 800ms, 30ms/230VAC around 800ms, 30ms/115VAC at full load 50ms/230VAC16ms/115VAC at full load 50ms/230VAC16ms/115VAC at full load
50ms/230VAC16ms/115VAC at full load 90 ~ 264VAC127 ~ 370VDC 90 ~ 264VAC127 ~ 370VDC
90 ~ 264VAC127 ~ 370VDC 47 ~ 440Hz 47 ~ 440Hz
47 ~ 440Hz 66% 74% 76% 77% 78% 79% 80% 80% 80% 66% 74% 76% 77% 78% 79% 80% 80% 80%
66% 74% 76% 77% 78% 79% 80% 80% 80% 1.6 A/115VAC0.9A/230VAC 1.6 A/115VAC0.9A/230VAC
1.6 A/115VAC0.9A/230VAC COLD START 17A/115VAC 40A/230VAC COLD START 17A/115VAC 40A/230VAC
COLD START 17A/115VAC 40A/230VAC Earth leakage current < 250 A/264VAC , Touch current < 60 a/264VAC Earth leakage current < 250 A/264VAC , Touch current < 60 a/264VAC
Earth leakage current < 250 A/264VAC , Touch current < 60 a/264VAC 73 ~ 105W (3.3 V:51 ~ 75W)(5V:70 ~ 105W) rated output power 73 ~ 105W (3.3 V:51 ~ 75W)(5V:70 ~ 105W) rated output power
73 ~ 105W (3.3 V:51 ~ 75W)(5V:70 ~ 105W) rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.46 5.75 V ~ 6.75 V 8.63 ~ 10.1 13.8 V ~ 16.2V15.5 ~ 18.2V17.25 ~ 20.25V27.6 ~ 32.4V31 ~ 36.45V55.2 ~ 64.8 V Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.46 5.75 V ~ 6.75 V 8.63 ~ 10.1 13.8 V ~ 16.2V15.5 ~ 18.2V17.25 ~ 20.25V27.6 ~ 32.4V31 ~ 36.45V55.2 ~ 64.8 V Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.46 5.75 V ~ 6.75 V 8.63 ~ 10.1 13.8 V ~ 16.2V15.5 ~ 18.2V17.25 ~ 20.25V27.6 ~ 32.4V31 ~ 36.45V55.2 ~ 64.8 V Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60 ° c (Refer to "Reduction Curve") -10 ~ +60 ° c (Refer to "Reduction Curve")
-10 ~ +60 ° c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH -20 ~ +85℃, 10 ~ 95% RH
-20 ~ +85℃, 10 ~ 95% RH 0.04%/c (0 ~ 50 ° c) 0.04%/c (0 ~ 50 ° c)
0.04%/c (0 ~ 50 ° c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes SECURITY and SECURITY and
SECURITY and SECURITY STANDARDSANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved SECURITY STANDARDSANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved
SECURITY STANDARDSANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP
ISOLATION LEVELPrimary-Secondary: 2xMOPP, Primary-Earth:1xMOPP EMC EMC
EMC (Note 4) (Note 4)
(Note 4) OTHER OTHER
OTHER RESISTANCE TO STRESS RESISTANCE TO STRESS
RESISTANCE TO STRESS ISOLATION RESISTANCE EMC EMISSION ISOLATION RESISTANCE EMC EMISSION
ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3 I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3
I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2, medical level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2, medical level, criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2, medical level, criteria A 359.7 Khrs min.MIL-HDBK-217F (25c) 359.7 Khrs min.MIL-HDBK-217F (25c)
359.7 Khrs min.MIL-HDBK-217F (25c) 127*76*42mm (L*W*H) 127*76*42mm (L*W*H)
127*76*42mm (L*W*H) 0.23 Kg; 54pcs/14.6 Kg/1.35 CUFT 0.23 Kg; 54pcs/14.6 Kg/1.35 CUFT
0.23 Kg; 54pcs/14.6 Kg/1.35 CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) 5. Mounting holesM1 and M2 should be grounded for EMI purposes. 5. Mounting holesM1 and M2 should be grounded for EMI purposes.
5. Mounting holesM1 and M2 should be grounded for EMI purposes. 6. Heat sink HS1,HS2 can not be shorted. 6. Heat sink HS1,HS2 can not be shorted.
6. Heat sink HS1,HS2 can not be shorted. 7. Touchcurrentwas measured from the main entrance to the DC output. 7. Touchcurrentwas measured from the main entrance to the DC output.
7. Touchcurrentwas measured from the main entrance to the DC output.File name:MPS-65-SPEC2015-07-17 File name:MPS-65-SPEC2015-07-17
File name:MPS-65-SPEC2015-07-17