LPS-50-3.3 MEANWELL AC-DC Single output Open frame power supply, Output 3.3VDC / 10A

50W Single Output switching Power supply LPS-50series 50W Single Output switching Power supply LPS-50series
50W Single Output switching Power supply LPS-50series Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Cooling by free air convection Cooling by free air convection
Cooling by free air convection Small and compact size Small and compact size
Small and compact size Built-in remote ON-OFF control Built-in remote ON-OFF control
Built-in remote ON-OFF control LED indicator for power on LED indicator for power on
LED indicator for power on 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Low profile:23mm thickness Low profile:23mm thickness
Low profile:23mm thickness 2 years warranty 2 years warranty
2 years warranty
SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL LPS-50-3.3 LPS-50-3.3
LPS-50-3.3 .. ..
.. LPS-50-5LPS-50-12LPS-50-15LPS-50-24LPS-50-48 LPS-50-5LPS-50-12LPS-50-15LPS-50-24LPS-50-48
LPS-50-5LPS-50-12LPS-50-15LPS-50-24LPS-50-48 DC VOLTAGE RATED CURRENT RANGE RATED POWER DC VOLTAGE RATED CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT RANGE RATED POWER 3.3 V 3.3 V
3.3 V 10A 10A
10A 0 ~ 12A 0 ~ 12A
0 ~ 12A 33W 33W
33W 5V 5V
5V 10A 10A
10A 0 ~ 12A 0 ~ 12A
0 ~ 12A 50W 50W
50W 12V 12V
12V 4.2 4.2
4.2 0 ~ 5A 0 ~ 5A
0 ~ 5A 50.4 W 50.4 W
50.4 W 15V 15V
15V 3.4 3.4
3.4 0 ~ 4.1 A 0 ~ 4.1 A
0 ~ 4.1 A 51W 51W
51W 24V 24V
24V 2.1 A 2.1 A
2.1 A 0 ~ 2.5 a 0 ~ 2.5 a
0 ~ 2.5 a 50.4 W 50.4 W
50.4 W 48V 48V
48V 1.1 1.1
1.1 0 ~ 1.3 A 0 ~ 1.3 A
0 ~ 1.3 A 52.8 W 52.8 W
52.8 W OUTPUT OUTPUT
OUTPUT Maximum LOAD(10 sec.)Note.439.6 W Maximum LOAD(10 sec.)Note.439.6 W
Maximum LOAD(10 sec.)Note.439.6 W RIPPLE & NOISE (max.) Note.250mVp-p RIPPLE & NOISE (max.) Note.250mVp-p
RIPPLE & NOISE (max.) Note.250mVp-p 60W 60W
60W 50mVp-p 50mVp-p
50mVp-p 60W 60W
60W 80mVp-p 80mVp-p
80mVp-p 61.5 W 61.5 W
61.5 W 80mVp-p 80mVp-p
80mVp-p 60W 60W
60W 80mVp-p 80mVp-p
80mVp-p 62.4 W 62.4 W
62.4 W 100mVp-p 100mVp-p
100mVp-p VOLTAGE ADJ. RANGE of VOLTAGE ADJ. RANGE of
VOLTAGE ADJ. RANGE of 3 ~ 3.6 V 3 ~ 3.6 V
3 ~ 3.6 V 4.5 ~ 5.5 V 4.5 ~ 5.5 V
4.5 ~ 5.5 V 10.8 ~ 13.2 V 10.8 ~ 13.2 V
10.8 ~ 13.2 V 13.5 ~ 16.5 V 13.5 ~ 16.5 V
13.5 ~ 16.5 V 21.6 ~ 27.2 V 21.6 ~ 27.2 V
21.6 ~ 27.2 V 43.2 ~ 52.8 V 43.2 ~ 52.8 V
43.2 ~ 52.8 V VOLTAGE TOLERANCE Note.33.0% VOLTAGE TOLERANCE Note.33.0%
VOLTAGE TOLERANCE Note.33.0% 3.0%2.0%2.0%1.0%1.0% 3.0%2.0%2.0%1.0%1.0%
3.0%2.0%2.0%1.0%1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 1.0% 1.0%
1.0% 3.0% 3.0%
3.0% 1.0%1.0%1.0%1.0%1.0% 1.0%1.0%1.0%1.0%1.0%
1.0%1.0%1.0%1.0%1.0% 3.0%2.0%2.0%1.0%1.0% 3.0%2.0%2.0%1.0%1.0%
3.0%2.0%2.0%1.0%1.0% SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE
SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE FREQUENCY RANGE
FREQUENCY RANGE 100 ms, 40 ms/230VAC 100ms, 40ms/115VAC at full load 100 ms, 40 ms/230VAC 100ms, 40ms/115VAC at full load
100 ms, 40 ms/230VAC 100ms, 40ms/115VAC at full load 70ms/230VAC12ms/115VAC at full load 70ms/230VAC12ms/115VAC at full load
70ms/230VAC12ms/115VAC at full load 90 ~ 264VAC127 ~ 370VDC 90 ~ 264VAC127 ~ 370VDC
90 ~ 264VAC127 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63HzINPUT INPUT
INPUT EFFICIENCY(Typ.) EFFICIENCY(Typ.)
EFFICIENCY(Typ.) AC CURRENT (Typ.) AC CURRENT (Typ.)
AC CURRENT (Typ.)115VAC 115VAC
115VAC 230VAC 230VAC
230VAC 75% 75%
75% 0.9 to 0.9 to
0.9 to 0.6 to 0.6 to
0.6 to 81% 81%
81% 1.2 1.2
1.2 0.8 to 0.8 to
0.8 to 82% 84% 85% 86% 82% 84% 85% 86%
82% 84% 85% 86% THE FUNCTION OF PROTECTION THE FUNCTION OF PROTECTION
PROTECTION FUNCTIONENVIRONMENT ENVIRONMENT
ENVIRONMENTSAFETY & EMC SAFETY AND EMC
SAFETY AND EMC (Note 5) (Note 5)
(Note 5)OTHER OTHER
OTHER INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD of
OVERLOADOVER VOLTAGE REMOTE ON/OFF OVER VOLTAGE REMOTE ON/OFF
OVER VOLTAGE REMOTE ON/OFF WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING COLD START 18A/115VAC 35A/230VAC COLD START 18A/115VAC 35A/230VAC
COLD START 18A/115VAC 35A/230VAC <1mA / 240VAC <1mA / 240VAC
<1mA / 240VAC 122 ~ 160% rated output power 122 ~ 160% rated output power
122 ~ 160% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45 5.75 V ~ 6.75 13.8 V ~ 16.2 V 17.25 ~ 20.25 27.6 V ~ 32.4 57.6 V ~ 67.2 V Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45 5.75 V ~ 6.75 13.8 V ~ 16.2 V 17.25 ~ 20.25 27.6 V ~ 32.4 57.6 V ~ 67.2 V Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.45 5.75 V ~ 6.75 13.8 V ~ 16.2 V 17.25 ~ 20.25 27.6 V ~ 32.4 57.6 V ~ 67.2 V Protection type : Hiccup mode, recovers automatically after fault condition is removed RC+/RC- : 0 ~ 0.8 V power on ; 4 ~ 10V power off RC+/RC- : 0 ~ 0.8 V power on ; 4 ~ 10V power off
RC+/RC- : 0 ~ 0.8 V power on ; 4 ~ 10V power off -20 ~ +70c (Refer to "Reduction Curve") -20 ~ +70c (Refer to "Reduction Curve")
-20 ~ +70c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH -20 ~ +85℃, 10 ~ 95% RH
-20 ~ +85℃, 10 ~ 95% RH 0.04%/c (0 ~ 50 ° c) 0.04%/c (0 ~ 50 ° c)
0.04%/c (0 ~ 50 ° c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2) heavy industry level, criteria Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2) heavy industry level, criteria
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2) heavy industry level, criteria 341.7 Khrs min.MIL-HDBK-217F (25c) 341.7 Khrs min.MIL-HDBK-217F (25c)
341.7 Khrs min.MIL-HDBK-217F (25c) 195*55*23 mm (L*W*H) 195*55*23 mm (L*W*H)
195*55*23 mm (L*W*H) 0.24 Kg; 48pcs/12.5 Kg/0.84 CUFT 0.24 Kg; 48pcs/12.5 Kg/0.84 CUFT
0.24 Kg; 48pcs/12.5 Kg/0.84 CUFT NOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 33.3% of the working cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower. 4. 33.3% of the working cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower.
4. 33.3% of the working cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) File name:LPS-50-SPEC2015-07-17 File name:LPS-50-SPEC2015-07-17
File name:LPS-50-SPEC2015-07-17