LPS-100-7.5 MEANWELL AC-DC Single output Open frame power supply, Output 7.5VDC / 13.3A

100W Single Output without PFC FunctionLPS-100series 100W Single Output without PFC FunctionLPS-100series
100W Single Output without PFC FunctionLPS-100series Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Cooling by free air convection Cooling by free air convection
Cooling by free air convection 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Fix switching frequency at 134KHz Fix switching frequency at 134KHz
Fix switching frequency at 134KHz 2 years warranty 2 years warranty
2 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL .. ..
.. LPS-100-3.3 LPS-100-5LPS-100-7.5 LPS-100-12LPS-100-13.5 LPS-100-15LPS-100-24LPS-100-27LPS-100-48 LPS-100-3.3 LPS-100-5LPS-100-7.5 LPS-100-12LPS-100-13.5 LPS-100-15LPS-100-24LPS-100-27LPS-100-48
LPS-100-3.3 LPS-100-5LPS-100-7.5 LPS-100-12LPS-100-13.5 LPS-100-15LPS-100-24LPS-100-27LPS-100-48 THE DC VOLTAGE THE DC VOLTAGE
THE DC VOLTAGE 3.3V5V 7.5V12V 13.5 V 3.3V5V 7.5V12V 13.5 V
3.3V5V 7.5V12V 13.5 V 15V 15V
15V 24V 27V 48V 24V 27V 48V
24V 27V 48V RATED CURRENT CURRENT RANGE RATED CURRENT CURRENT RANGE
RATED CURRENT CURRENT RANGE 20A 20A 13.3A8.4A7.5A6.7A4.2A3.8A2.1A 20A 20A 13.3A8.4A7.5A6.7A4.2A3.8A2.1A
20A 20A 13.3A8.4A7.5A6.7A4.2A3.8A2.1A 0 ~ 20 0 ~ 20 0 ~ 13.3A0 ~ 8.4A0 ~ 7.5A0 ~ 6.7A0 ~ 4.2 A(6A 10s)0 ~ 3.8A0 ~ 2.1 0 ~ 20 0 ~ 20 0 ~ 13.3A0 ~ 8.4A0 ~ 7.5A0 ~ 6.7A0 ~ 4.2 A(6A 10s)0 ~ 3.8A0 ~ 2.1
0 ~ 20 0 ~ 20 0 ~ 13.3A0 ~ 8.4A0 ~ 7.5A0 ~ 6.7A0 ~ 4.2 A(6A 10s)0 ~ 3.8A0 ~ 2.1 RATED POWER RATED POWER
RATED POWER 66W100W99.75W 100.8 W 101.25 W 100.5 W 66W100W99.75W 100.8 W 101.25 W 100.5 W
66W100W99.75W 100.8 W 101.25 W 100.5 W 100.8 W(144W 10s)102.6 W 100.8 W 100.8 W(144W 10s)102.6 W 100.8 W
100.8 W(144W 10s)102.6 W 100.8 W RIPPLE & NOISE (max.) Note.2150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 200mVp-p RIPPLE & NOISE (max.) Note.2150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 200mVp-p
RIPPLE & NOISE (max.) Note.2150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 200mVp-p OUTPUT VOLTAGE ADJ. RANGE of OUTPUT VOLTAGE ADJ. RANGE of
OUTPUT VOLTAGE ADJ. RANGE of 3 ~ 3.6V4.5 ~ 5.7 V 6 ~ 9V 10 ~ 13.2V12 ~ 15V 13.5 ~ 18V20 ~ 26.4V26 ~ 32V 41 ~ 56V 3 ~ 3.6V4.5 ~ 5.7 V 6 ~ 9V 10 ~ 13.2V12 ~ 15V 13.5 ~ 18V20 ~ 26.4V26 ~ 32V 41 ~ 56V
3 ~ 3.6V4.5 ~ 5.7 V 6 ~ 9V 10 ~ 13.2V12 ~ 15V 13.5 ~ 18V20 ~ 26.4V26 ~ 32V 41 ~ 56V VOLTAGE TOLERANCE Note.33.0%3.0%2.0%2.0%2.0%2.0%1.0%1.0%1.0% VOLTAGE TOLERANCE Note.33.0%3.0%2.0%2.0%2.0%2.0%1.0%1.0%1.0%
VOLTAGE TOLERANCE Note.33.0%3.0%2.0%2.0%2.0%2.0%1.0%1.0%1.0% INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.)
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD of
OVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of The VIBRATION The VIBRATION
The VIBRATION 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% 2.0%2.0%1.5%1.5%1.5%1.5%0.5%0.5%0.5% 2.0%2.0%1.5%1.5%1.5%1.5%0.5%0.5%0.5%
2.0%2.0%1.5%1.5%1.5%1.5%0.5%0.5%0.5% Around 800ms, 50ms/230VAC 1200ms, 50ms/115VAC at full load Around 800ms, 50ms/230VAC 1200ms, 50ms/115VAC at full load
Around 800ms, 50ms/230VAC 1200ms, 50ms/115VAC at full load 20ms/230VAC20ms/115VAC at full load 20ms/230VAC20ms/115VAC at full load
20ms/230VAC20ms/115VAC at full load 88 ~ 132VAC / 176 ~ 264VAC auto switch 248 ~ 370VDC 88 ~ 132VAC / 176 ~ 264VAC auto switch 248 ~ 370VDC
88 ~ 132VAC / 176 ~ 264VAC auto switch 248 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 69% 77% 77% 79% 79% 80% 80% 81% 81% 69% 77% 77% 79% 79% 80% 80% 81% 81%
69% 77% 77% 79% 79% 80% 80% 81% 81% 2.3 A/115VAC1.5A/230VAC 2.3 A/115VAC1.5A/230VAC
2.3 A/115VAC1.5A/230VAC COLD START 30A/115VAC 60A/230VAC COLD START 30A/115VAC 60A/230VAC
COLD START 30A/115VAC 60A/230VAC <1mA / 240VAC <1mA / 240VAC
<1mA / 240VAC 105 ~ 140% (+24V: above 6.5 A) rated output power 105 ~ 140% (+24V: above 6.5 A) rated output power
105 ~ 140% (+24V: above 6.5 A) rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45 5.75 V ~ 6.75 V 9.4 ~ 10.9 13.8 V ~ 16.2 15.5 V ~ 18.2 V 18 ~ 21V 27.6 ~ 32.4 V 33.7 ~ 39.2 57.6 V ~ 67.2 V Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45 5.75 V ~ 6.75 V 9.4 ~ 10.9 13.8 V ~ 16.2 15.5 V ~ 18.2 V 18 ~ 21V 27.6 ~ 32.4 V 33.7 ~ 39.2 57.6 V ~ 67.2 V Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.45 5.75 V ~ 6.75 V 9.4 ~ 10.9 13.8 V ~ 16.2 15.5 V ~ 18.2 V 18 ~ 21V 27.6 ~ 32.4 V 33.7 ~ 39.2 57.6 V ~ 67.2 V Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60 ° c (Refer to "Reduction Curve") -10 ~ +60 ° c (Refer to "Reduction Curve")
-10 ~ +60 ° c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH -20 ~ +85℃, 10 ~ 95% RH
-20 ~ +85℃, 10 ~ 95% RH 0.05%/c (0 ~ 50 ° c) 0.05%/c (0 ~ 50 ° c)
0.05%/c (0 ~ 50 ° c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes SECURITY STANDARDSUL60950-1, TUV EN60950-1 approved SECURITY STANDARDSUL60950-1, TUV EN60950-1 approved
SECURITY STANDARDSUL60950-1, TUV EN60950-1 approved SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note 4) (Note 4)
(Note 4)OTHER OTHER
OTHER VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING I/P-O/P:3KVAC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A
Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 203.6 Khrs min.MIL-HDBK-217F (25c) 203.6 Khrs min.MIL-HDBK-217F (25c)
203.6 Khrs min.MIL-HDBK-217F (25c) 222*62*32 mm (L*W*H) 222*62*32 mm (L*W*H)
222*62*32 mm (L*W*H) 0.45 Kg; 24pcs/12.5 Kg/1.39 CUFT 0.45 Kg; 24pcs/12.5 Kg/1.39 CUFT
0.45 Kg; 24pcs/12.5 Kg/1.39 CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) 5. If the input range 85V-89V, the output load is changed from 0A-ratedload, Therewill be reduced 20V for 1second (LPS-100-24). 5. If the input range 85V-89V, the output load is changed from 0A-ratedload, Therewill be reduced 20V for 1second (LPS-100-24).
5. If the input range 85V-89V, the output load is changed from 0A-ratedload, Therewill be reduced 20V for 1second (LPS-100-24). 6. Mounting holesM1 and M2 must be connected to earth forEMI purposes. 6. Mounting holesM1 and M2 must be connected to earth forEMI purposes.
6. Mounting holesM1 and M2 must be connected to earth forEMI purposes. File name:LPS-100-SPEC2015-07-17 File name:LPS-100-SPEC2015-07-17
File name:LPS-100-SPEC2015-07-17