LPP-100-13.5 MEANWELL AC-DC Single output Open frame power supply with PFC, Output 13.5VDC / 7.5A

100W Single Output with PFC FunctionLPP-100series 100W Single Output with PFC FunctionLPP-100series
100W Single Output with PFC FunctionLPP-100series Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Built-in active PFC function Built-in active PFC function
Built-in active PFC function Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Cooling by free air convection Cooling by free air convection
Cooling by free air convection 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Fixed switching frequency at PFC:67KHzPWM:134KHz Fixed switching frequency at PFC:67KHzPWM:134KHz
Fixed switching frequency at PFC:67KHzPWM:134KHz 3 years warranty 3 years warranty
3 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL THE DC VOLTAGE THE DC VOLTAGE
THE DC VOLTAGE .. ..
.. LPP-100-3.3 LPP-100-5LPP-100-7.5 LPP-100-12LPP-100-13.5 LPP-100-15LPP-100-24LPP-100-27LPP-100-48 LPP-100-3.3 LPP-100-5LPP-100-7.5 LPP-100-12LPP-100-13.5 LPP-100-15LPP-100-24LPP-100-27LPP-100-48
LPP-100-3.3 LPP-100-5LPP-100-7.5 LPP-100-12LPP-100-13.5 LPP-100-15LPP-100-24LPP-100-27LPP-100-48 3.3V5V 7.5V12V 13.5V15V 24V 27V 48V 3.3V5V 7.5V12V 13.5V15V 24V 27V 48V
3.3V5V 7.5V12V 13.5V15V 24V 27V 48V RATED CURRENT RATED CURRENT
RATED CURRENT 20A 20A 13.5A8.5A7.5A6.7A4.2A 20A 20A 13.5A8.5A7.5A6.7A4.2A
20A 20A 13.5A8.5A7.5A6.7A4.2A 3.8A2.1A 3.8A2.1A
3.8A2.1A CURRENT RANGE RATED POWER CURRENT RANGE RATED POWER
CURRENT RANGE RATED POWER 0 ~ 20 0 ~ 20 0 ~ 13.3A0 ~ 8.5A0 ~ 7.5A0 ~ 6.7 A 0 ~ 20 0 ~ 20 0 ~ 13.3A0 ~ 8.5A0 ~ 7.5A0 ~ 6.7 A
0 ~ 20 0 ~ 20 0 ~ 13.3A0 ~ 8.5A0 ~ 7.5A0 ~ 6.7 A 66W100W101.25W 102W101.25W 100.5 W 66W100W101.25W 102W101.25W 100.5 W
66W100W101.25W 102W101.25W 100.5 W 0 ~ 4.2 0 ~ 4.2
0 ~ 4.2 100.8 W 100.8 W
100.8 W 0 ~ 3.8A0 ~ 2.1 0 ~ 3.8A0 ~ 2.1
0 ~ 3.8A0 ~ 2.1 102.6 W 100.8 W 102.6 W 100.8 W
102.6 W 100.8 WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p
RIPPLE & NOISE (max.) Note.2100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p VOLTAGE ADJ. RANGE of VOLTAGE ADJ. RANGE of
VOLTAGE ADJ. RANGE of 3.14 ~ 3.63 4.75 V ~ 5.5 V 7.13 ~ 8.25 V 11.4 ~ 13.2 V 12.8 ~ 14.9 V 14.3 ~ 16.5 V 22.8 ~ 26.4 V 25.7 ~ 29.7 V 45.6 ~ 52.8 V 3.14 ~ 3.63 4.75 V ~ 5.5 V 7.13 ~ 8.25 V 11.4 ~ 13.2 V 12.8 ~ 14.9 V 14.3 ~ 16.5 V 22.8 ~ 26.4 V 25.7 ~ 29.7 V 45.6 ~ 52.8 V
3.14 ~ 3.63 4.75 V ~ 5.5 V 7.13 ~ 8.25 V 11.4 ~ 13.2 V 12.8 ~ 14.9 V 14.3 ~ 16.5 V 22.8 ~ 26.4 V 25.7 ~ 29.7 V 45.6 ~ 52.8 V VOLTAGE TOLERANCE Note.32.0% VOLTAGE TOLERANCE Note.32.0%
VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0%
2.0% 2.0%2.0%2.0%2.0%1.0%1.0%1.0% 2.0%2.0%2.0%2.0%1.0%1.0%1.0%
2.0%2.0%2.0%2.0%1.0%1.0%1.0% LINE REGULATION LINE REGULATION
LINE REGULATION 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% LOAD REGULATION LOAD REGULATION
LOAD REGULATION 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5%0.5% 0.5%0.5%
0.5%0.5% SETUP, RISE TIME HOLD TIME (Typ.) SETUP, RISE TIME HOLD TIME (Typ.)
SETUP, RISE TIME HOLD TIME (Typ.) 600ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load 600ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
600ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load 28ms/230VAC28ms/115VAC at full load 28ms/230VAC28ms/115VAC at full load
28ms/230VAC28ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC
VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF>0.95/230VAC PF>0.98/115VAC at full load PF>0.95/230VAC PF>0.98/115VAC at full load
PF>0.95/230VAC PF>0.98/115VAC at full load INPUT INPUT
INPUT EFFICIENCY(Typ.) EFFICIENCY(Typ.)
EFFICIENCY(Typ.) 69% 69%
69% 75% 76% 79% 79% 80% 83% 83% 83% 75% 76% 79% 79% 80% 83% 83% 83%
75% 76% 79% 79% 80% 83% 83% 83%PROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD of
OVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of
OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT of The VIBRATION The VIBRATION
The VIBRATION 1.7 A/115VAC0.75A/230VAC COLD START 30A/230VAC 1.7 A/115VAC0.75A/230VAC COLD START 30A/230VAC
1.7 A/115VAC0.75A/230VAC COLD START 30A/230VAC <2mA / 240VAC <2mA / 240VAC
<2mA / 240VAC 105 ~ 150% rated output power 105 ~ 150% rated output power
105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.8 ~ 4.45 5.75 V ~ 6.75 V 8.6 ~ 10.1 13.8 V ~ 16.2 15.5 V ~ 18.2 V 17.25 ~ 20.25 27.6 V ~ 32.4 V 31 ~ 36.45V55.2 ~ 64.8 V Protection type : Shut down o/p voltage, re-power on to recover 3.8 ~ 4.45 5.75 V ~ 6.75 V 8.6 ~ 10.1 13.8 V ~ 16.2 15.5 V ~ 18.2 V 17.25 ~ 20.25 27.6 V ~ 32.4 V 31 ~ 36.45V55.2 ~ 64.8 V Protection type : Shut down o/p voltage, re-power on to recover
3.8 ~ 4.45 5.75 V ~ 6.75 V 8.6 ~ 10.1 13.8 V ~ 16.2 15.5 V ~ 18.2 V 17.25 ~ 20.25 27.6 V ~ 32.4 V 31 ~ 36.45V55.2 ~ 64.8 V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 ° c (Refer to "Reduction Curve") -10 ~ +60 ° c (Refer to "Reduction Curve")
-10 ~ +60 ° c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH -20 ~ +85℃, 10 ~ 95% RH
-20 ~ +85℃, 10 ~ 95% RH 0.05%/c (0 ~ 50 ° c) 0.05%/c (0 ~ 50 ° c)
0.05%/c (0 ~ 50 ° c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes SECURITY STANDARDSUL60950-1, TUV EN60950-1 approved SECURITY STANDARDSUL60950-1, TUV EN60950-1 approved
SECURITY STANDARDSUL60950-1, TUV EN60950-1 approved SAFETY AND EMC SAFETY AND EMC
SAFETY AND EMC (Note 4) (Note 4)
(Note 4)OTHER OTHER
OTHER VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING I/P-O/P:3KVAC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:2.0 KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A 224.3 Khrs min.MIL-HDBK-217F (25c) 224.3 Khrs min.MIL-HDBK-217F (25c)
224.3 Khrs min.MIL-HDBK-217F (25c) 222*62*33.6 mm (L*W*H) 222*62*33.6 mm (L*W*H)
222*62*33.6 mm (L*W*H) 0.51 Kg; 24pcs/13.9 Kg/1.39 CUFT 0.51 Kg; 24pcs/13.9 Kg/1.39 CUFT
0.51 Kg; 24pcs/13.9 Kg/1.39 CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)
(asavailable in http://www.meanwell.com) 5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.File name:LPP-100-SPEC2015-07-17 File name:LPP-100-SPEC2015-07-17
File name:LPP-100-SPEC2015-07-17