LPF-90-30 MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 30VDC / 3A, cable output, No dimm..

90 W Single Output switching Power supply 90 W Single Output switching Power supply
90W Single Output Switching Power SupplyFeatures : Features :
Features : LPF-90series LPF-90series
LPF-90series F F
FSPECIFICATION SPECIFICATION
SPECIFICATION 110 110
One hundred ten M MSELV IP67 M MSELV IP67
M MSELV IP67 UniversalAC input / Full range (up to 305VAC) UniversalAC input / Full range (up to 305VAC)
UniversalAC input / Full range (up to 305VAC) Built-in active PFC function Built-in active PFC function
Built-in active PFC function High efficiency up to 91% High efficiency up to 91%
High efficiency up to 91% Protections: short circuit / Over current/ Over voltage/ Over temperature Protections: short circuit / Over current/ Over voltage/ Over temperature
Protections: short circuit / Over current/ Over voltage/ Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection Fully isolated plastic case Fully isolated plastic case
Fully isolated plastic case Fully encapsulated with IP67 level (Note.6) Fully encapsulated with IP67 level (Note.6)
Fully encapsulated with IP67 level (Note.6) Classpower unit, no FG Classpower unit, no FG
Classpower unit, no FG Class 2 power unit Class 2 power unit
Class 2 power unit Type HL LED Driver for often Class I, Type HL LED Driver for often Class I,
Type HL LED Driver for often Class I, Division 2 hazardous locationluminaires Division 2 hazardous locationluminaires
Division 2 hazardous locationluminaires Suitable for LED lighting and moving sign applications Suitable for LED lighting and moving sign applications
Suitable for LED lighting and moving sign applications The fulfillment of all the world safetyregulations for the lighting The fulfillment of all the world safetyregulations for the lighting
The fulfillment of all the world safetyregulations for the lighting Suitable for dry / damp/ wet locations Suitable for dry / damp/ wet locations
Suitable for dry / damp/ wet locations 5 years warranty 5 years warranty
5 years warranty( for 48V,54V only) ( except for 48V,54V ) ( for 48V,54V only) ( except for 48V,54V )
( for 48V,54V only) ( except for 48V,54V )MODEL MODEL
MODELLPF-90-15 LPF-90-20 LPF-90-24 LPF-90-30 LPF-90-36 LPF-90-42 LPF-90-48 LPF-90-54 LPF-90-15 LPF-90-20 LPF-90-24 LPF-90-30 LPF-90-36 LPF-90-42 LPF-90-48 LPF-90-54
LPF-90-15 LPF-90-20 LPF-90-24 LPF-90-30 LPF-90-36 LPF-90-42 LPF-90-48 LPF-90-54 THE DC VOLTAGE THE DC VOLTAGE
THE DC VOLTAGE 15V 15V
15V 20V 24V30V36V 20V 24V30V36V
20V 24V30V36V 42V 42V
42V 48V 48V
48V 54V 54V
54V CONSTANT CURRENT REGION Note.4 9 ~ 15V12 ~ 20V14.4 ~ 24V 18 ~ 30V21.6 ~ 36V CONSTANT CURRENT REGION Note.4 9 ~ 15V12 ~ 20V14.4 ~ 24V 18 ~ 30V21.6 ~ 36V
CONSTANT CURRENT REGION Note.4 9 ~ 15V12 ~ 20V14.4 ~ 24V 18 ~ 30V21.6 ~ 36V 25.2 ~ 42V 25.2 ~ 42V
25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V 28.8 ~ 48V 32.4 ~ 54V
28.8 ~ 48V 32.4 ~ 54V NOMINAL CURRENT NOMINAL POWER NOMINAL CURRENT NOMINAL POWER
NOMINAL CURRENT NOMINAL POWER 5A 4.5 A 3.75 A 3A2.5A 5A 4.5 A 3.75 A 3A2.5A
5A 4.5 A 3.75 A 3A2.5A 75W 90W 90W 90W 90W 75W 90W 90W 90W 90W
75W 90W 90W 90W 90W 2.15 A 2.15 A
2.15 A 90.3 W 90.3 W
90.3 W 1.88 A 1.88 A
1.88 A 90.24 W 90.24 W
90.24 W 1.67 A 1.67 A
1.67 A 90.18 W 90.18 W
90.18 WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2150mVp-p150mVp-p150mVp-p200mVp-p200mVp-p RIPPLE & NOISE (max.) Note.2150mVp-p150mVp-p150mVp-p200mVp-p200mVp-p
RIPPLE & NOISE (max.) Note.2150mVp-p150mVp-p150mVp-p200mVp-p200mVp-p 200mVp-p 200mVp-p
200mVp-p 200mVp-p 200mVp-p
200mVp-p 200mVp-p 200mVp-p
200mVp-p VOLTAGE TOLERANCE Note.34.0%4.0%4.0%4.0%4.0%4.0%4.0%4.0% VOLTAGE TOLERANCE Note.34.0%4.0%4.0%4.0%4.0%4.0%4.0%4.0%
VOLTAGE TOLERANCE Note.34.0%4.0%4.0%4.0%4.0%4.0%4.0%4.0% LINE REGULATION LINE REGULATION
LINE REGULATION 0.5%0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5%0.5%
0.5%0.5%0.5%0.5%0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% LOAD REGULATION LOAD REGULATION
LOAD REGULATION 1.5% 1.5%
1.5% 1.0% 0.5% 0.5% 0.5% 1.0% 0.5% 0.5% 0.5%
1.0% 0.5% 0.5% 0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% SETUP, RISE TIME Note.71200ms, 200ms / 115VAC at full load500ms, 200ms / 230VAC at full load SETUP, RISE TIME Note.71200ms, 200ms / 115VAC at full load500ms, 200ms / 230VAC at full load
SETUP, RISE TIME Note.71200ms, 200ms / 115VAC at full load500ms, 200ms / 230VAC at full load HOLD TIME (Typ.) HOLD TIME (Typ.)
HOLD TIME (Typ.) 16ms/230VAC16ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC
VOLTAGE RANGE Note.5 90 ~ 305VAC127 ~ 431VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF>0.97/115VAC, PF>0.96/230VAC, PF>0.95/277VAC at full load (please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input PF>0.97/115VAC, PF>0.96/230VAC, PF>0.95/277VAC at full load (please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input
PF>0.97/115VAC, PF>0.96/230VAC, PF>0.95/277VAC at full load (please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VAC input and output loading75% at 277VAC input INPUT INPUT
INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.)
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT(Typ.) MAX. No. of the systems of power in the 16TH MAX. No. of the systems of power in the 16TH
MAX. No. of the systems of power in the 16TH 89%90%90.5%91%91% 89%90%90.5%91%91%
89%90%90.5%91%91% 0.95 A / 115VAC0.5A / 230VAC 0.4 A / 277VAC 0.95 A / 115VAC0.5A / 230VAC 0.4 A / 277VAC
0.95 A / 115VAC0.5A / 230VAC 0.4 A / 277VAC COLD start 70A(twidth=435s measured at 50% Ipeak) at 230VAC COLD start 70A(twidth=435s measured at 50% Ipeak) at 230VAC
COLD start 70A(twidth=435s measured at 50% Ipeak) at 230VAC 91% 91%
91% 91% 91%
91% 91% 91%
91% CIRCUIT BREAKER4 units (circuit breaker type B) / 6 units(circuit breaker type C) 230VAC CIRCUIT BREAKER4 units (circuit breaker type B) / 6 units(circuit breaker type C) 230VAC
CIRCUIT BREAKER4 units (circuit breaker type B) / 6 units(circuit breaker type C) 230VAC THE LEAKAGE CURRENT THE LEAKAGE CURRENT
THE LEAKAGE CURRENT <0.75 mA / 277VAC <0.75 mA / 277VAC
<0.75 mA / 277VAC MOST of CURRENTNote.4 95 ~ 108% MOST of CURRENTNote.4 95 ~ 108%
MOST of CURRENTNote.4 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Constant current limiting, recovers automatically after fault condition is removedPROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENTOVER VOLTAGE OVER VOLTAGE
MOST OF VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY
THE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., The MOISTURE STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION 18 ~ 21V23 ~ 27V28 ~ 34V34 ~ 38V41 ~ 46V Protection type : Shut down o/p voltage, re-power on to recover 18 ~ 21V23 ~ 27V28 ~ 34V34 ~ 38V41 ~ 46V Protection type : Shut down o/p voltage, re-power on to recover
18 ~ 21V23 ~ 27V28 ~ 34V34 ~ 38V41 ~ 46V Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover -40 ~ +70C (Refer to "Reduction Curve") -40 ~ +70C (Refer to "Reduction Curve")
-40 ~ +70C (Refer to "Reduction Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing
20 ~ 95% RH non-condensing -40 ~ +80C, 10 ~ 95% RH -40 ~ +80C, 10 ~ 95% RH
-40 ~ +80C, 10 ~ 95% RH 0.03%/C (0 ~ 50 ° C) 0.03%/C (0 ~ 50 ° C)
0.03%/C (0 ~ 50 ° C) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, y, Z axes 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, y, Z axes
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, y, Z axes 47 ~ 53V 47 ~ 53V
47 ~ 53V 54 ~ 60V 54 ~ 60V
54 ~ 60V 59 ~ 65V 59 ~ 65V
59 ~ 65VSAFETY & EMC SAFETY AND EMC
SECURITY AND EMCOTHERS OTHER
OTHER SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY STANDARDS WITHSTAND VOLTAGE
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION ISOLATION RESISTANCE EMC EMISSION
ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING UL8750, ENEC EN61347-1, EN61347-2-13 independent, EN62384, J61347-1, J61347-2-13, IP67 approved ; Design refer to UL60950-1, TUV EN60950-1 UL8750, ENEC EN61347-1, EN61347-2-13 independent, EN62384, J61347-1, J61347-2-13, IP67 approved ; Design refer to UL60950-1, TUV EN60950-1
UL8750, ENEC EN61347-1, EN61347-2-13 independent, EN62384, J61347-1, J61347-2-13, IP67 approved ; Design refer to UL60950-1, TUV EN60950-1 I/P-O/P:3.75 KVAC I/P-O/P:3.75 KVAC
I/P-O/P:3.75 KVAC I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH
I/P-O/P:100M Ohms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3 Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3
Compliance to EN55015, EN61000-3-2 Class C (60% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria B Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria B
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria B 301.6 Khrs min.MIL-HDBK-217F (25C) 301.6 Khrs min.MIL-HDBK-217F (25C)
301.6 Khrs min.MIL-HDBK-217F (25C) 161*61*36mm (L*W*H) 161*61*36mm (L*W*H)
161*61*36mm (L*W*H) 0.7 Kg;20pcs/15Kg/0.73 CUFT 0.7 Kg;20pcs/15Kg/0.73 CUFT
0.7 Kg;20pcs/15Kg/0.73 CUFTNOTE NOTE
NOTE 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature. 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 ° C ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Please refer to "DRIVING METHODS OF LED MODULE". 4. Please refer to "DRIVING METHODS OF LED MODULE".
4. Please refer to "DRIVING METHODS OF LED MODULE". 5. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details. 5. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details.
5. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details. 6. Suitable for indoor useor outdoorusewithout direct sunlightexposure. Please avoid immerse in the waterover 30 minutes. 6. Suitable for indoor useor outdoorusewithout direct sunlightexposure. Please avoid immerse in the waterover 30 minutes.
6. Suitable for indoor useor outdoorusewithout direct sunlightexposure. Please avoid immerse in the waterover 30 minutes. 7. Lengthof setting time is measured at cold first start.Turn on/OFF the supply can lead to the increase of the setup time. 7. Lengthof setting time is measured at cold first start.Turn on/OFF the supply can lead to the increase of the setup time.
7. Lengthof setting time is measured at cold first start.Turn on/OFF the supply can lead to the increase of the setup time. 8. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 8. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
8. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 9. To comply with the requirements of the latestErP regulation of the luminaires, LED supply you canonly be used behinda switch without permanently connected to the electrical grid. 9. To comply with the requirements of the latestErP regulation of the luminaires, LED supply you canonly be used behinda switch without permanently connected to the electrical grid.
9. To comply with the requirements of the latestErP regulation of the luminaires, LED supply you canonly be used behinda switch without permanently connected to the electrical grid. File name:LPF-90-SPEC2015-07-31 File name:LPF-90-SPEC2015-07-31
File name:LPF-90-SPEC2015-07-31