CEN-60-12 MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 12VDC / 5A

LED driver.

Specially designed for the regulation of LED strips.

Format in metal boxIP66.

Input range90-295Vca47-63Hz.

Output voltage12vdc.Adjustable by external potentiometer (10,8-13,5 Vcc).

Output intensity5A. Range of output current 0-5A according to demand load.

Maximum output current adjustable through external potentiometer (3,75-5A).

Power:60W.

Efficiency typical:86%.

Potentiometers: This model incorporates 2 external potentiometers that allows us to regulate the output voltage and the maximum output current.

Input class I with grounding.

Factor corrector, power>0,95to 230vac at full load.

Operating temperature range of caseTcfrom-30ºCup+70ºC.

Dimensions (Length x Width x Height):185 x 62,5 x 40,5 mm

3 years of warranty.

Manufacturer: MEAN WELL.

The series CEN are LED drivers designed to work directly with LED strips or LED bulbs, which are fed at constant voltage. Working mode constant voltage giving a fixed voltage of 12V if the load is powered at constant voltage and does not overcome the maximum output power. The output current and the output voltage can be adjusted byexternal potentiometerslocated in the housing of the source.

With metal housing, suitable for LED lighting and signalling mobile in dry environments, humid, and wet conditions. Valid for interior and exterior. This model has a noise and ripple maximum of 2.4 Vp-p, so that should not be used with controllers, just to feed directly into LEDs. Complies with the requirements of security at the global level for lighting. Test burn at 100% load. High reliability with PFC (correction Factor for Power) is active.