150W U-Bracket Single Output with the Function of PFC
150W U-Bracket Single Output with the Function of PFC
150W U-Bracket Single Output with the Function of PFC
USP-150series
USP-150series
USP-150seriesFeatures :
Features :
Features :
UniversalAC input / Full range(up to 295VAC)
UniversalAC input / Full range(up to 295VAC)
UniversalAC input / Full range(up to 295VAC)
Built-in active PFC function
Built-in active PFC function
Built-in active PFC function
Constant voltage design
Constant voltage design
Constant voltage design
High efficiency up to 93%
High efficiency up to 93%
High efficiency up to 93%
Protections: short circuit / Overload / Over voltage/ Over temperature
Protections: short circuit / Overload / Over voltage/ Over temperature
Protections: short circuit / Overload / Over voltage/ Over temperature
Cooling by free air convection
Cooling by free air convection
Cooling by free air convection
U-bracket low profile:33mm
U-bracket low profile:33mm
U-bracket low profile:33mm
ZVS technology to reduce power dissipation
ZVS technology to reduce power dissipation
ZVS technology to reduce power dissipation
3 years warranty
3 years warranty
3 years warrantySPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
USP-150-12 USP-150-15 USP-150-24
USP-150-12 USP-150-15 USP-150-24
USP-150-12 USP-150-15 USP-150-24
USP-150-36
USP-150-36
USP-150-36
USP-150-48
USP-150-48
USP-150-48
DC VOLTAGE RATED CURRENT CURRENT RANGE
DC VOLTAGE RATED CURRENT CURRENT RANGE
DC VOLTAGE RATED CURRENT CURRENT RANGE
12V
12V
12V
12,5
12,5
12,5
0 ~ 12.5 a
0 ~ 12.5 a
0 ~ 12.5 a
15V
15V
15V
10A
10A
10A
0 ~ 10A
0 ~ 10A
0 ~ 10A
24V
24V
24V
6.3 A
6.3 A
6.3 A
0 ~ 6.3
0 ~ 6.3
0 ~ 6.3
36V
36V
36V
4.2
4.2
4.2
0 ~ 4.2
0 ~ 4.2
0 ~ 4.2
48V
48V
48V
3.2
3.2
3.2
0 ~ 3.2
0 ~ 3.2
0 ~ 3.2
RATED POWER
RATED POWER
RATED POWER
150W150W151.2W
150W150W151.2W
150W150W151.2W
151.2 W
151.2 W
151.2 W
153.6 W
153.6 W
153.6 W
OUTPUT
OUTPUT
OUTPUT
RIPPLE & NOISE (max.) Note.2100mVp-p150mVp-p150mVp-p
RIPPLE & NOISE (max.) Note.2100mVp-p150mVp-p150mVp-p
RIPPLE & NOISE (max.) Note.2100mVp-p150mVp-p150mVp-p
250mVp-p
250mVp-p
250mVp-p
250mVp-p
250mVp-p
250mVp-p
VOLTAGE ADJ. RANGE of
VOLTAGE ADJ. RANGE of
VOLTAGE ADJ. RANGE of
11.0~13.2 V 13.5~16.5V21.6~26.4 V
11.0~13.2 V 13.5~16.5V21.6~26.4 V
11.0~13.2 V 13.5~16.5V21.6~26.4 V
32.4~39.6 V
32.4~39.6 V
32.4~39.6 V
43.2~52.8 V
43.2~52.8 V
43.2~52.8 V
VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0%
VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0%
VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0%
2.0%
2.0%
2.0%
2.0%
2.0%
2.0%
LINE REGULATION LOAD REGULATION SETUP, RISE TIME
LINE REGULATION LOAD REGULATION SETUP, RISE TIME
LINE REGULATION LOAD REGULATION SETUP, RISE TIME
HOLD TIME (Typ.)
HOLD TIME (Typ.)
HOLD TIME (Typ.)
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
0.5% 0.5% 0.5%
1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
1.0% 1.0% 1.0%
2000 ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
2000 ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
2000 ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load
16ms/230VAC16ms/115VAC at full load
0.5%
0.5%
0.5%
1.0%
1.0%
1.0%
0.5%
0.5%
0.5%
1.0%
1.0%
1.0%
VOLTAGE RANGE Note.4 90 ~ 295VAC127 ~ 417VDC
VOLTAGE RANGE Note.4 90 ~ 295VAC127 ~ 417VDC
VOLTAGE RANGE Note.4 90 ~ 295VAC127 ~ 417VDC
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.)
47 ~ 63Hz
47 ~ 63Hz
47 ~ 63Hz
PF0.98/115VAC PF0.96/230VAC PF0.94/277VAC at full load
PF0.98/115VAC PF0.96/230VAC PF0.94/277VAC at full load
PF0.98/115VAC PF0.96/230VAC PF0.94/277VAC at full load
INPUT
INPUT
INPUT
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
EFFICIENCY (Typ.)
91.5%
91.5%
91.5%
91.5% 93%
91.5% 93%
91.5% 93%
93%
93%
93%
93%
93%
93%
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
The OVERHEAD of
The OVERHEAD of
The OVERHEAD of
2A/115VAC 1A/230VAC0.7A/277VAC Cold start 65A/230VAC
2A/115VAC 1A/230VAC0.7A/277VAC Cold start 65A/230VAC
2A/115VAC 1A/230VAC0.7A/277VAC Cold start 65A/230VAC
<2mA / 240VAC
<2mA / 240VAC
<2mA / 240VAC
110~160% rated output power
110~160% rated output power
110~160% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removedPROTECTION
PROTECTION
PROTECTIONOVER VOLTAGE
OVER VOLTAGE
OVER VOLTAGE
13.6 ~ 16.3V17 ~ 21V 26.7 ~ 32.4 V
13.6 ~ 16.3V17 ~ 21V 26.7 ~ 32.4 V
13.6 ~ 16.3V17 ~ 21V 26.7 ~ 32.4 V
41.4 ~ 48.6 V
41.4 ~ 48.6 V
41.4 ~ 48.6 V
53 ~ 64.8 V
53 ~ 64.8 V
53 ~ 64.8 V
ENVIRONMENT
ENVIRONMENT
ENVIRONMENTOVER TEMPERATURE WORKING TEMP WORKING HUMIDITY
THE OVER TEMPERATURE WORKING TEMP WORKING HUMIDITY
THE OVER TEMPERATURE WORKING TEMP WORKING HUMIDITY
STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS
SAFETY STANDARDS
SAFETY STANDARDS
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down
Shut down o/p voltage, recovers automatically after temperature goes down
-30 ~ +65 (Refer to output load curve of power reduction)
-30 ~ +65 (Refer to output load curve of power reduction)
-30 ~ +65 (Refer to output load curve of power reduction)
20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing
-40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH
-40 ~ +85, 10 ~ 95% RH
0.03%/ (0 ~ 60)
0.03%/ (0 ~ 60)
0.03%/ (0 ~ 60)
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
UL60950-1 approved; design refer to IEC60950-1,EN60950-1
UL60950-1 approved; design refer to IEC60950-1,EN60950-1
UL60950-1 approved; design refer to IEC60950-1,EN60950-1
SECURITY and
SECURITY and
SECURITY and
WITHSTAND VOLTAGE of the Note.6I/P-O/P:3.0 KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC
WITHSTAND VOLTAGE of the Note.6I/P-O/P:3.0 KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC
WITHSTAND VOLTAGE of the Note.6I/P-O/P:3.0 KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC
EMC
EMC
EMC
(Note 5)
(Note 5)
(Note 5)OTHER
OTHER
OTHER
ISOLATION RESISTANCE EMC EMISSION
ISOLATION RESISTANCE EMC EMISSION
ISOLATION RESISTANCE EMC EMISSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
PACKAGING
PACKAGING
PACKAGING
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70% RH
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level (surge 4KV),criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level (surge 4KV),criteria A
216.3 K hrs min.MIL-HDBK-217F (25)
216.3 K hrs min.MIL-HDBK-217F (25)
216.3 K hrs min.MIL-HDBK-217F (25)
215*67.4*33mm (L*W*H)
215*67.4*33mm (L*W*H)
215*67.4*33mm (L*W*H)
0.48 kg;24PCS/12.5 kg/0.61 CUFT
0.48 kg;24PCS/12.5 kg/0.61 CUFT
0.48 kg;24PCS/12.5 kg/0.61 CUFTNOTE
NOTE
NOTE
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation.
4. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details.
4. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details.
4. Deratingmay be necessary underlow input voltages. Please checkthe static characteristics for more details.
5. The supply is considered a component which will be installedinto a final computer. All EMC testing has been executed for mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)
5. The supply is considered a component which will be installedinto a final computer. All EMC testing has been executed for mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)
5. The supply is considered a component which will be installedinto a final computer. All EMC testing has been executed for mountingthe unit on a 360mm*360mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that still meets EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)
6. Please, remove the component D1 beforeconducted Hipot test.
6. Please, remove the component D1 beforeconducted Hipot test.
6. Please, remove the component D1 beforeconducted Hipot test.File name:USP-150-SPEC2016-01-21
File name:USP-150-SPEC2016-01-21
File name:USP-150-SPEC2016-01-21