SP-480-3.3 MEANWELL AC-DC Enclosed power supply, Output 3.3VDC / 85A, PFC, forced air cooling

480 W Single Output with the Function of PFC 480 W Single Output with the Function of PFC
480 W Single Output with the Function of PFC SP-480series SP-480series
SP-480series Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Built-in active PFC function,PF>0.95 Built-in active PFC function,PF>0.95
Built-in active PFC function,PF>0.95 Protections: short circuit / Overload / Over voltage / Over temperature Protections: short circuit / Overload / Over voltage / Over temperature
Protections: short circuit / Overload / Over voltage / Over temperature The forced air cooling built-in DC fan The forced air cooling built-in DC fan
The forced air cooling built-in DC fan High power density 5.18 w/in3 High power density 5.18 w/in3
High power density 5.18 w/in3 Low profile:43mm thickness Low profile:43mm thickness
Low profile:43mm thickness Built-in remote ON-OFF control Built-in remote ON-OFF control
Built-in remote ON-OFF control Built-in remote sense function Built-in remote sense function
Built-in remote sense function Active AC surge current limiting Active AC surge current limiting
Active AC surge current limiting 3 years warranty 3 years warranty
3 years warranty Bauar t gepr u f t Bauar t gepr u f t
Bauar t gepr u f t Sicherheit egel ma ge Sicherheit egel ma ge
Sicherheit egel ma ge od or s od or s
od or s be wacg be wacg
be wacg SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE DC VOLTAGE RATED CURRENT CURRENT RANGE
DC VOLTAGE RATED CURRENT CURRENT RANGE www. tuv. com www. tuv. com
www. tuv. com ID 2000000000 ID 2000000000
ID 2000000000SP-480-3.3 SP-480-5SP-480-12SP-480-15SP-480-24SP-480-48 SP-480-3.3 SP-480-5SP-480-12SP-480-15SP-480-24SP-480-48
SP-480-3.3 SP-480-5SP-480-12SP-480-15SP-480-24SP-480-48 3.3 V 5V12V15V24V48V 3.3 V 5V12V15V24V48V
3.3 V 5V12V15V24V48V 85A85A40A32A20A10A 85A85A40A32A20A10A
85A85A40A32A20A10A 0 ~ 85A0 ~ 85A0 ~ 43A0 ~ 35A0 ~ 22A0 ~ 11A 0 ~ 85A0 ~ 85A0 ~ 43A0 ~ 35A0 ~ 22A0 ~ 11A
0 ~ 85A0 ~ 85A0 ~ 43A0 ~ 35A0 ~ 22A0 ~ 11A RATED POWER RATED POWER
RATED POWER 280.5 W 280.5 W
280.5 W 425W 425W
425W 480W 480W
480W 480W 480W
480W 480W 480W
480W 480W 480W
480W Peak LOAD(10min.) Note.5280.5 W Peak LOAD(10min.) Note.5280.5 W
Peak LOAD(10min.) Note.5280.5 W 425W 425W
425W 516W 516W
516W 525W 525W
525W 528W 528W
528W 528W 528W
528WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.280mVp-p 80mVp-p 120mVp-p 150mVp-p 150mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.280mVp-p 80mVp-p 120mVp-p 150mVp-p 150mVp-p 240mVp-p
RIPPLE & NOISE (max.) Note.280mVp-p 80mVp-p 120mVp-p 150mVp-p 150mVp-p 240mVp-p VOLTAGE ADJ. RANGE of VOLTAGE ADJ. RANGE of
VOLTAGE ADJ. RANGE of 2.9 ~ 3.6 4.5 V ~ 5.5 10.8 V ~ 13.2 V 13.5 ~ 18V22 ~ 27.6V41~ 56V 2.9 ~ 3.6 4.5 V ~ 5.5 10.8 V ~ 13.2 V 13.5 ~ 18V22 ~ 27.6V41~ 56V
2.9 ~ 3.6 4.5 V ~ 5.5 10.8 V ~ 13.2 V 13.5 ~ 18V22 ~ 27.6V41~ 56V VOLTAGE TOLERANCE Note.32.0%2.0%1.5%1.5%1.0%1.0% VOLTAGE TOLERANCE Note.32.0%2.0%1.5%1.5%1.0%1.0%
VOLTAGE TOLERANCE Note.32.0%2.0%1.5%1.5%1.0%1.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) 0.5%0.5%0.3%0.3%0.2%0.2% 0.5%0.5%0.3%0.3%0.2%0.2%
0.5%0.5%0.3%0.3%0.2%0.2% 1.0%1.0%0.5%0.5%0.5%0.5% 1.0%1.0%0.5%0.5%0.5%0.5%
1.0%1.0%0.5%0.5%0.5%0.5% 1000ms, 80ms/230VAC 2500ms, 80ms/115VAC at full load 1000ms, 80ms/230VAC 2500ms, 80ms/115VAC at full load
1000ms, 80ms/230VAC 2500ms, 80ms/115VAC at full load 18ms/230VAC18ms/115VAC at full load 18ms/230VAC18ms/115VAC at full load
18ms/230VAC18ms/115VAC at full load VOLTAGE RANGE Note.7 85 ~ 264VAC120 ~ 370VDC VOLTAGE RANGE Note.7 85 ~ 264VAC120 ~ 370VDC
VOLTAGE RANGE Note.7 85 ~ 264VAC120 ~ 370VDCINPUT INPUT
INPUT PROTECTION PROTECTION
PROTECTION FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD of
OVERLOADOVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz PF>0.95/230VAC PF>0.98/115VAC at full load PF>0.95/230VAC PF>0.98/115VAC at full load
PF>0.95/230VAC PF>0.98/115VAC at full load 74% 79% 85% 85% 88% 89% 74% 79% 85% 85% 88% 89%
74% 79% 85% 85% 88% 89% 6.5 A/115VAC3.5A/230VAC 6.5 A/115VAC3.5A/230VAC
6.5 A/115VAC3.5A/230VAC 20A/115VAC40A/230VAC 20A/115VAC40A/230VAC
20A/115VAC40A/230VAC <2mA / 240VAC <2mA / 240VAC
<2mA / 240VAC 87 ~ 103 87 ~ 103A 45.15 ~ 58.05 A 36.75 ~ 47.25 A 23.1 ~ 29.7 A 11.55 ~ 14.85 A Protection type : Constant current limiting, recovers automatically after conditions is removed 87 ~ 103 87 ~ 103A 45.15 ~ 58.05 A 36.75 ~ 47.25 A 23.1 ~ 29.7 A 11.55 ~ 14.85 A Protection type : Constant current limiting, recovers automatically after conditions is removed
87 ~ 103 87 ~ 103A 45.15 ~ 58.05 A 36.75 ~ 47.25 A 23.1 ~ 29.7 A 11.55 ~ 14.85 A Protection type : Constant current limiting, recovers automatically after conditions is removed 3.8 ~ 4.45 5.75 V ~ 6.75 13.8 V ~ 16.2 V 18 ~ 21V 28.8 ~ 33.6 57.6 V ~ 67.2 V 3.8 ~ 4.45 5.75 V ~ 6.75 13.8 V ~ 16.2 V 18 ~ 21V 28.8 ~ 33.6 57.6 V ~ 67.2 V
3.8 ~ 4.45 5.75 V ~ 6.75 13.8 V ~ 16.2 V 18 ~ 21V 28.8 ~ 33.6 57.6 V ~ 67.2 V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover MOST of TEMPERATURENote.4Shut down o/p voltage, recovers automatically after temperature goes down MOST of TEMPERATURENote.4Shut down o/p voltage, recovers automatically after temperature goes down
MOST of TEMPERATURENote.4Shut down o/p voltage, recovers automatically after temperature goes down THE ROLE OF ENVIRONMENT THE ROLE OF ENVIRONMENT
FUNCTION ENVIRONMENTSAFETY & EMC SAFETY AND EMC
SAFETY AND EMC (Note 6) (Note 6)
(Note 6)OTHER OTHER
OTHER REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY
REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., The MOISTURE STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING RC+/RC-: 0 ~ 0.8 V=power on ; 4 ~ 10V=power off RC+/RC-: 0 ~ 0.8 V=power on ; 4 ~ 10V=power off
RC+/RC-: 0 ~ 0.8 V=power on ; 4 ~ 10V=power off -20 ~ +60 ° c (Refer to "Reduction Curve") -20 ~ +60 ° c (Refer to "Reduction Curve")
-20 ~ +60 ° c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH -40 ~ +85℃, 10 ~ 95% RH
-40 ~ +85℃, 10 ~ 95% RH 0.03%/c (0 ~ 50 ° c) 0.03%/c (0 ~ 50 ° c)
0.03%/c (0 ~ 50 ° c) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approved
UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:Short I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:Short
I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:Short I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), light industry level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), light industry level, criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), light industry level, criteria A 120.5 K hrs min.MIL-HDBK-217F (25c) 120.5 K hrs min.MIL-HDBK-217F (25c)
120.5 K hrs min.MIL-HDBK-217F (25c) 278*127*43 mm (L*W*H) 278*127*43 mm (L*W*H)
278*127*43 mm (L*W*H) 1.7 Kg; 6pcs/11.3 Kg/0.67 CUFT 1.7 Kg; 6pcs/11.3 Kg/0.67 CUFT
1.7 Kg; 6pcs/11.3 Kg/0.67 CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. TSW1: Detecton heat sink powertransistor. 4. TSW1: Detecton heat sink powertransistor.
4. TSW1: Detecton heat sink powertransistor. TSW2: Detecton heat sink of output diode. TSW2: Detecton heat sink of output diode.
TSW2: Detecton heat sink of output diode. 5. 33% duty cycle maximumwithin every 30 minutes.Average output powershould does not exceed the ratedpower. 5. 33% duty cycle maximumwithin every 30 minutes.Average output powershould does not exceed the ratedpower.
5. 33% duty cycle maximumwithin every 30 minutes.Average output powershould does not exceed the ratedpower. 6. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in 6. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in
6. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in a 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how to a 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how to
a 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how to to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com) to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)
to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com) 7. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 7. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
7. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.File name:SP-480-SPEC2015-10-12 File name:SP-480-SPEC2015-10-12
File name:SP-480-SPEC2015-10-12