108W/216W desktop Power supply or Charger
108W/216W desktop Power supply or Charger
108W/216W desktop Power supply or Charger
E S C / S P - 1 2 0 / 2 4 0 s e r i e s
E S C / S P - 1 2 0 / 2 4 0 s e r i e s
E S C / S P - 1 2 0 / 2 4 0 s e r i e s
Features :
Features :
Features :
AC input range switch selectedby
AC input range switch selectedby
AC input range switch selectedby
Protections: short circuit/ Overload / Over voltage/ Over temperature
Protections: short circuit/ Overload / Over voltage/ Over temperature
Protections: short circuit/ Overload / Over voltage/ Over temperature
Batteryunder/Over voltageand polarityprotections(ESC only) Forced air cooling built-in DC fan(240Wonly)
Batteryunder/Over voltageand polarityprotections(ESC only) Forced air cooling built-in DC fan(240Wonly)
Batteryunder/Over voltageand polarityprotections(ESC only) Forced air cooling built-in DC fan(240Wonly)
Fixed switchingfrequencyat 25KHz
Fixed switchingfrequencyat 25KHz
Fixed switchingfrequencyat 25KHz
3 colors LED charging indicator
3 colors LED charging indicator
3 colors LED charging indicator
2 years warranty
2 years warranty
2 years warrantySPECIFICATION
SPECIFICATION
SPECIFICATION
MODEL
MODEL
MODEL
DC VOLTAGE RATED CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT RANGE RATED POWER
ESC/ESP-120 ESC/ESP-240
ESC/ESP-120 ESC/ESP-240
ESC/ESP-120 ESC/ESP-240
13.5 V 27V54V13.5V 27V54V
13.5 V 27V54V13.5V 27V54V
13.5 V 27V54V13.5V 27V54V
8A4A2A16A8A4A
8A4A2A16A8A4A
8A4A2A16A8A4A
0 - 8A0 - 4A0 - 2A0 - 16A 0 - 8A0 - 4A
0 - 8A0 - 4A0 - 2A0 - 16A 0 - 8A0 - 4A
0 - 8A0 - 4A0 - 2A0 - 16A 0 - 8A0 - 4A
108W108W108W216W216W216W
108W108W108W216W216W216W
108W108W108W216W216W216W
RIPPLE & NOISE (max.) Note.2120mVp-p150mVp-p400mVp-p120mVp-p150mVp-p400mVp-p
RIPPLE & NOISE (max.) Note.2120mVp-p150mVp-p400mVp-p120mVp-p150mVp-p400mVp-p
RIPPLE & NOISE (max.) Note.2120mVp-p150mVp-p400mVp-p120mVp-p150mVp-p400mVp-p
OUTPUTVOLTAGE ADJ. RANGE of
OUTPUTVOLTAGE ADJ. RANGE of
OUTPUTVOLTAGE ADJ. RANGE of
12 - 15V 24 - 30V 48 - 56V 12 - 15V 24 - 30V 48 - 56V
12 - 15V 24 - 30V 48 - 56V 12 - 15V 24 - 30V 48 - 56V
12 - 15V 24 - 30V 48 - 56V 12 - 15V 24 - 30V 48 - 56V
VOLTAGE TOLERANCENote.32.0%1.0%1.0%2.0%1.0%1.0%
VOLTAGE TOLERANCENote.32.0%1.0%1.0%2.0%1.0%1.0%
VOLTAGE TOLERANCENote.32.0%1.0%1.0%2.0%1.0%1.0%
LINE REGULATION 0.5%0.5% 0.5%
LINE REGULATION 0.5%0.5% 0.5%
LINE REGULATION 0.5%0.5% 0.5%
1.0% 0.5% 0.5%
1.0% 0.5% 0.5%
1.0% 0.5% 0.5%
LOAD REGULATION 2.0% 1.0% 0.5%
LOAD REGULATION 2.0% 1.0% 0.5%
LOAD REGULATION 2.0% 1.0% 0.5%
2.0%
2.0%
2.0%
1.0% 0.5%
1.0% 0.5%
1.0% 0.5%
SETUP, RISE TIME HOLD TIME (Typ.)
SETUP, RISE TIME HOLD TIME (Typ.)
SETUP, RISE TIME HOLD TIME (Typ.)
200 ms, 100 ms at full load
200 ms, 100 ms at full load
200 ms, 100 ms at full load
36ms at full load
36ms at full load
36ms at full load
200 ms, 100 ms at full load
200 ms, 100 ms at full load
200 ms, 100 ms at full load
30ms at full load
30ms at full load
30ms at full loadINPUT
INPUT
INPUT
VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD
The OVERHEAD of
The OVERHEAD of
88 - 132VAC/176 -264VAC selected by switch249 - 370VDC
88 - 132VAC/176 -264VAC selected by switch249 - 370VDC
88 - 132VAC/176 -264VAC selected by switch249 - 370VDC
47 - 63Hz
47 - 63Hz
47 - 63Hz
81% 83% 84% 81% 84% 85%
81% 83% 84% 81% 84% 85%
81% 83% 84% 81% 84% 85%
3A/115VAC 1.5 A/230VAC4.5A/115VAC 2.5 A/230VAC COLD START 40A
3A/115VAC 1.5 A/230VAC4.5A/115VAC 2.5 A/230VAC COLD START 40A
3A/115VAC 1.5 A/230VAC4.5A/115VAC 2.5 A/230VAC COLD START 40A
<3.5 mA / 240VAC
<3.5 mA / 240VAC
<3.5 mA / 240VAC
105 - 135% rated output power
105 - 135% rated output power
105 - 135% rated output power
Type of protection : double current limiting, recovers automatically after fault condition is removed
Type of protection : double current limiting, recovers automatically after fault condition is removed
Type of protection : double current limiting, recovers automatically after fault condition is removed
15.5 - 18.2 V
15.5 - 18.2 V
15.5 - 18.2 V
31 - 36.5 V
31 - 36.5 V
31 - 36.5 V
62.1 - 72.9 V
62.1 - 72.9 V
62.1 - 72.9 V
15.5 - 18.2 V
15.5 - 18.2 V
15.5 - 18.2 V
31 - 36.5 V
31 - 36.5 V
31 - 36.5 V
62.1 - 72.9 V
62.1 - 72.9 V
62.1 - 72.9 V
PROTECTION
PROTECTION
PROTECTION
THE ROLE OF ENVIRONMENT
THE ROLE OF ENVIRONMENT
FUNCTION ENVIRONMENTSAFETY & EMC
SAFETY AND EMC
SAFETY AND EMC
(Note 4)
(Note 4)
(Note 4)OTHER
OTHER
OTHER
OVER VOLTAGE
OVER VOLTAGE
OVER VOLTAGE
ON THE TEMPERATURE OF THE BATTERY
ON THE TEMPERATURE OF THE BATTERY
ON THE TEMPERATURE OF THE BATTERY
FAN CONTROL WORKING TEMP. WORKING HUMIDITY
FAN CONTROL WORKING TEMP. WORKING HUMIDITY
FAN CONTROL WORKING TEMP. WORKING HUMIDITY
STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE
The VIBRATION
The VIBRATION
The VIBRATION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION
PACKAGING
PACKAGING
PACKAGING
Protection type : Constant voltage limiting, recovers automatically after fault condition is removed
Protection type : Constant voltage limiting, recovers automatically after fault condition is removed
Protection type : Constant voltage limiting, recovers automatically after fault condition is removed
RTH580detect in the heat sink 01,02 power transistorRTH585detect in the heat sink 01,02 power transistor
RTH580detect in the heat sink 01,02 power transistorRTH585detect in the heat sink 01,02 power transistor
RTH580detect in the heat sink 01,02 power transistorRTH585detect in the heat sink 01,02 power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ESC series with bat. the polarity, bat. Under voltage, bat. Over voltage protection
ESC series with bat. the polarity, bat. Under voltage, bat. Over voltage protection
ESC series with bat. the polarity, bat. Under voltage, bat. Over voltage protection
NO FAN RTH5 60FAN,50FAN OFF
NO FAN RTH5 60FAN,50FAN OFF
NO FAN RTH5 60FAN,50FAN OFF
-10 - +60(Refer to "Reduction Curve")
-10 - +60(Refer to "Reduction Curve")
-10 - +60(Refer to "Reduction Curve")
20% - 90% RH non-condensing
20% - 90% RH non-condensing
20% - 90% RH non-condensing
-20 - +85 , 10% - 95% RH
-20 - +85 , 10% - 95% RH
-20 - +85 , 10% - 95% RH
10 - 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 - 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
10 - 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes
CSA1010.1(UL3101-1,IEC1010-1,EN61010-1) approved
CSA1010.1(UL3101-1,IEC1010-1,EN61010-1) approved
CSA1010.1(UL3101-1,IEC1010-1,EN61010-1) approved
I/P-O/P:3KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC
I/P-O/P:3KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4, light industry level, criteria A
Compliance to EN61000-4-2,3,4, light industry level, criteria A
Compliance to EN61000-4-2,3,4, light industry level, criteria A
215.8 K hrs min.(ESC-120)200.6 K hrs min.(ESC-240)250.9 K Hrs min.(ESP-120)226.6 K Hrs min.(ESP-240) MIL-HDBK-217F (25 )
215.8 K hrs min.(ESC-120)200.6 K hrs min.(ESC-240)250.9 K Hrs min.(ESP-120)226.6 K Hrs min.(ESP-240) MIL-HDBK-217F (25 )
215.8 K hrs min.(ESC-120)200.6 K hrs min.(ESC-240)250.9 K Hrs min.(ESP-120)226.6 K Hrs min.(ESP-240) MIL-HDBK-217F (25 )
150*140*86 mm (L*W*H)
150*140*86 mm (L*W*H)
150*140*86 mm (L*W*H)
1.38 Kg; 8pcs/12Kg/1.1 CUFT(ESC-120) 1.5 Kg; 8pcs/13Kg/1.1 CUFT(ESC-240)
1.38 Kg; 8pcs/12Kg/1.1 CUFT(ESC-120) 1.5 Kg; 8pcs/13Kg/1.1 CUFT(ESC-240)
1.38 Kg; 8pcs/12Kg/1.1 CUFT(ESC-120) 1.5 Kg; 8pcs/13Kg/1.1 CUFT(ESC-240)
NOTE
NOTE
NOTE
1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedloadand 25 of ambient temperature.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable in http://www.meanwell.com)
File name:ESC/ESP-120/240-SPEC 2011-08-09
File name:ESC/ESP-120/240-SPEC 2011-08-09
File name:ESC/ESP-120/240-SPEC 2011-08-09