SP-100-3.3 MEANWELL AC-DC Enclosed power supply, Output 3.3VDC / 20A, PFC, free air convection

1 0 0 W S i n g l e O u t p u t M e d i c a l Ty p e 1 0 0 W S i n g l e O u t p u t M e d i c a l Ty p e
1 0 0 W S i n g l e O u t p u t M e d i c a l Ty p e M S P - 1 0 0s e r i e s M S P - 1 0 0s e r i e s
M S P - 1 0 0s e r i e s SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE DC VOLTAGE RATED CURRENT CURRENT RANGE
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RATED POWER
RATED POWER Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Built-in active PFCfunction Built-in active PFCfunction
Built-in active PFCfunction High efficiency, up to 90% High efficiency, up to 90%
High efficiency, up to 90% Withstand 300VAC surge input for 5 seconds Withstand 300VAC surge input for 5 seconds
Withstand 300VAC surge input for 5 seconds Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltage
Protections: short circuit / Overload / Over voltage Protections: Over temperature (optional) Protections: Over temperature (optional)
Protections: Over temperature (optional) Cooling by free air convection Cooling by free air convection
Cooling by free air convection 1U low profile 38mm 1U low profile 38mm
1U low profile 38mm Medical safetyapproved (MOOP level) Medical safetyapproved (MOOP level)
Medical safetyapproved (MOOP level) Built-in remote ON-OFF control Built-in remote ON-OFF control
Built-in remote ON-OFF control No load power consumption<0.5 W No load power consumption<0.5 W
No load power consumption<0.5 W All using 105 long life electrolyticcapacitors All using 105 long life electrolyticcapacitors
All using 105 long life electrolyticcapacitors 5 years warranty 5 years warranty
5 years warranty MSP-100-3.3 MSP-100-5 MSP-100-7.5 MSP-100-12MSP-100-15 MSP-100-24MSP-100-36MSP-100-48 MSP-100-3.3 MSP-100-5 MSP-100-7.5 MSP-100-12MSP-100-15 MSP-100-24MSP-100-36MSP-100-48
MSP-100-3.3 MSP-100-5 MSP-100-7.5 MSP-100-12MSP-100-15 MSP-100-24MSP-100-36MSP-100-48 3.3 V 5V 7.5 V 12V15V24V36V48V 3.3 V 5V 7.5 V 12V15V24V36V48V
3.3 V 5V 7.5 V 12V15V24V36V48V 20A 17A13.5A 8.5 A 7A 4.5 A 2.9 A 2.2 A 20A 17A13.5A 8.5 A 7A 4.5 A 2.9 A 2.2 A
20A 17A13.5A 8.5 A 7A 4.5 A 2.9 A 2.2 A 0 ~ 20A0 ~ 17A0 ~ 13.5 0 ~ 8.5 0 ~ 7A0 ~ 4.5 0 ~ 2.9 A 0 ~ 2.2 0 ~ 20A0 ~ 17A0 ~ 13.5 0 ~ 8.5 0 ~ 7A0 ~ 4.5 0 ~ 2.9 A 0 ~ 2.2
0 ~ 20A0 ~ 17A0 ~ 13.5 0 ~ 8.5 0 ~ 7A0 ~ 4.5 0 ~ 2.9 A 0 ~ 2.2 66W 85W 101.3W102W 105W 108W 104.4W105.6W 66W 85W 101.3W102W 105W 108W 104.4W105.6W
66W 85W 101.3W102W 105W 108W 104.4W105.6W RIPPLE & NOISE (max.)Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p RIPPLE & NOISE (max.)Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p
RIPPLE & NOISE (max.)Note.280mVp-p80mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p OUTPUTVOLTAGE ADJ. RANGE of OUTPUTVOLTAGE ADJ. RANGE of
OUTPUTVOLTAGE ADJ. RANGE of 3.1 ~ 3.8V4.75 ~ 5.8V7.1 ~ 9V 11.4 ~ 13.8V14.25 ~ 18V 22.8 ~ 28.8V34.2 ~ 39.6V45.6 ~ 55.2 V 3.1 ~ 3.8V4.75 ~ 5.8V7.1 ~ 9V 11.4 ~ 13.8V14.25 ~ 18V 22.8 ~ 28.8V34.2 ~ 39.6V45.6 ~ 55.2 V
3.1 ~ 3.8V4.75 ~ 5.8V7.1 ~ 9V 11.4 ~ 13.8V14.25 ~ 18V 22.8 ~ 28.8V34.2 ~ 39.6V45.6 ~ 55.2 V VOLTAGE TOLERANCE Note.3 +2.5,-3.5% +2.5,-3.5% 2.5% 1.5% 1.5% 1.5% 1.5% 1.5% VOLTAGE TOLERANCE Note.3 +2.5,-3.5% +2.5,-3.5% 2.5% 1.5% 1.5% 1.5% 1.5% 1.5%
VOLTAGE TOLERANCE Note.3 +2.5,-3.5% +2.5,-3.5% 2.5% 1.5% 1.5% 1.5% 1.5% 1.5% LINE REGULATION LOAD REGULATION SETUP, RISE TIME LINE REGULATION LOAD REGULATION SETUP, RISE TIME
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) HOLD TIME (Typ.)
HOLD TIME (Typ.) 0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% 0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2%
0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% 2.0% 2.0% 1.5% 0.8% 0.8% 0.5% 0.5% 0.5% 2.0% 2.0% 1.5% 0.8% 0.8% 0.5% 0.5% 0.5%
2.0% 2.0% 1.5% 0.8% 0.8% 0.5% 0.5% 0.5% 2500ms, 100ms/230VAC 2500ms, 100ms/115VAC at full load 2500ms, 100ms/230VAC 2500ms, 100ms/115VAC at full load
2500ms, 100ms/230VAC 2500ms, 100ms/115VAC at full load 50 ms /23 0VAC 20m s/115 VAC t fu ll load 50 ms /23 0VAC 20m s/115 VAC t fu ll load
50 ms /23 0VAC 20m s/115 VAC t fu ll load VOLTAGE RANGENote.5 85 ~ 2 64VAC 12 0 ~ 370 VDC VOLTAGE RANGENote.5 85 ~ 2 64VAC 12 0 ~ 370 VDC
VOLTAGE RANGENote.5 85 ~ 2 64VAC 12 0 ~ 370 VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)
FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 6 3Hz 47 ~ 6 3Hz
47 ~ 6 3Hz PF>0.9 5/2 30 VAC PF>0.9 8/115 VAC in ful l lo ad PF>0.9 5/2 30 VAC PF>0.9 8/115 VAC in ful l lo ad
PF>0.9 5/2 30 VAC PF>0.9 8/115 VAC in ful l lo ad INPUT INPUT
INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.)
EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)
INRUSH CURRENT (Typ.) 78%83% 78%83%
78%83% 1.2 A/115VA C 0 .6A/2 30 VAC 1.2 A/115VA C 0 .6A/2 30 VAC
1.2 A/115VA C 0 .6A/2 30 VAC 35 A/11 5 V AC 65 A/230 VAC 35 A/11 5 V AC 65 A/230 VAC
35 A/11 5 V AC 65 A/230 VAC 84%87.5% 88%88.5%89%90% 84%87.5% 88%88.5%89%90%
84%87.5% 88%88.5%89%90% The LEAKAGE CURRENTNote.6 Earth leakage current < 300A/264VAC , Touch leakage current < 100 a/264VAC The LEAKAGE CURRENTNote.6 Earth leakage current < 300A/264VAC , Touch leakage current < 100 a/264VAC
The LEAKAGE CURRENTNote.6 Earth leakage current < 300A/264VAC , Touch leakage current < 100 a/264VAC 10 5 ~ 135 % ra ted ou tput po we r 10 5 ~ 135 % ra ted ou tput po we r
10 5 ~ 135 % ra ted ou tput po we r The OVERHEAD of The OVERHEAD of
The OVERHEAD of P rote fiction type : Constant current lim iti ng for Vo=50 ~ 10 0% of the rated volta ge, rec ove rs auto matica lly after fa ult condition is rem oved P rote fiction type : Constant current lim iti ng for Vo=50 ~ 10 0% of the rated volta ge, rec ove rs auto matica lly after fa ult condition is rem oved
P rote fiction type : Constant current lim iti ng for Vo=50 ~ 10 0% of the rated volta ge, rec ove rs auto matica lly after fa ult condition is rem oved PROTECTION PROTECTION
PROTECTIONOVER VOLTAGE OVER VOLTAGE
OVER VOLTAGE 3.96 ~ V 4.62 3.96 ~ V 4.62
3.96 ~ V 4.62 6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V 6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V
6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V THE ROLE OF ENVIRONMENT THE ROLE OF ENVIRONMENT
FUNCTION ENVIRONMENTOVER TEMPERATURE REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY
OVER TEMPERATURE REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., The MOISTURE STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATION
TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS Prote cti on typ e : Shu t wn o/p vol tage , re-p ower to re co ver Prote cti on typ e : Shu t wn o/p vol tage , re-p ower to re co ver
Prote cti on typ e : Shu t wn o/p vol tage , re-p ower to re co ver Shu t down o/p vo ltag e, re co vers au tom atic al ly afte r tem pe ra ture to go is do wn Shu t down o/p vo ltag e, re co vers au tom atic al ly afte r tem pe ra ture to go is do wn
Shu t down o/p vo ltag e, re co vers au tom atic al ly afte r tem pe ra ture to go is do wn RC+/ RC- : 0 ~ 0.8 V= po wer o n ; 4 ~ 10V = po wer o ff RC+/ RC- : 0 ~ 0.8 V= po wer o n ; 4 ~ 10V = po wer o ff
RC+/ RC- : 0 ~ 0.8 V= po wer o n ; 4 ~ 10V = po wer o ff -40 ~ +60 (Re fer t o "ra ting Re e") -40 ~ +60 (Re fer t o "ra ting Re e")
-40 ~ +60 (Re fer t o "ra ting Re e") 20 ~ 9 0% RH no n-co nde ns ing 20 ~ 9 0% RH no n-co nde ns ing
20 ~ 9 0% RH no n-co nde ns ing -40 ~ +85, 10 ~ 95 % RH -40 ~ +85, 10 ~ 95 % RH
-40 ~ +85, 10 ~ 95 % RH 0 .04 %/ (0 ~ 50) 0 .04 %/ (0 ~ 50)
0 .04 %/ (0 ~ 50) 10 ~ 5 00Hz , 5G 10 meters. /1cy cl e, 60m. ea ch alo ng X, y, Z ax is 10 ~ 5 00Hz , 5G 10 meters. /1cy cl e, 60m. ea ch alo ng X, y, Z ax is
10 ~ 5 00Hz , 5G 10 meters. /1cy cl e, 60m. ea ch alo ng X, y, Z ax is ANSI/AAMI ES60601-1, IEC60601-1 approved ANSI/AAMI ES60601-1, IEC60601-1 approved
ANSI/AAMI ES60601-1, IEC60601-1 approved ISO LATI ON WILL SEE LPrim ary-Se co nda ry: 2MOOP, Prim aria-Ea rth: 1M object-oriented programming, Sec ond ary E-arth: 1M object-oriented programming ISO LATI ON WILL SEE LPrim ary-Se co nda ry: 2MOOP, Prim aria-Ea rth: 1M object-oriented programming, Sec ond ary E-arth: 1M object-oriented programming
ISO LATI ON WILL SEE LPrim ary-Se co nda ry: 2MOOP, Prim aria-Ea rth: 1M object-oriented programming, Sec ond ary E-arth: 1M object-oriented programming SECURITY and SECURITY and
SECURITY and EMC EMC
EMC (Note 4) (Note 4)
(Note 4)OTHER OTHER
OTHER VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION
VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGING
PACKAGING I/P-O/P:4KVACI/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P:4KVACI/P-FG:2KVACO/P-FG:0.5 KVAC
I/P-O/P:4KVACI/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:1 00M Ohm s / 5 00VDC / 25/ 70% RH Com pli anc e of the EN5 5011 (CISPR11) Cl ass B, EN610 00 -3 -2,-3 I/P-O/P, I/P-FG, O/P-FG:1 00M Ohm s / 5 00VDC / 25/ 70% RH Com pli anc e of the EN5 5011 (CISPR11) Cl ass B, EN610 00 -3 -2,-3
I/P-O/P, I/P-FG, O/P-FG:1 00M Ohm s / 5 00VDC / 25/ 70% RH Com pli anc e of the EN5 5011 (CISPR11) Cl ass B, EN610 00 -3 -2,-3 Com pli anc e of the EN6 100 0-4-2, 3,4,5 ,6,8 ,11 , EN60 601 -1-2 Com pli anc e of the EN6 100 0-4-2, 3,4,5 ,6,8 ,11 , EN60 601 -1-2
Com pli anc e of the EN6 100 0-4-2, 3,4,5 ,6,8 ,11 , EN60 601 -1-2 29 5.7 K hrs min. MI L-HDBK-2 17 F (25) 29 5.7 K hrs min. MI L-HDBK-2 17 F (25)
29 5.7 K hrs min. MI L-HDBK-2 17 F (25) 15 9*97 *3 8mm (L *W*H) 15 9*97 *3 8mm (L *W*H)
15 9*97 *3 8mm (L *W*H) 0.38 Kg; 24pcs/10.1 Kg/0.76 CUFT 0.38 Kg; 24pcs/10.1 Kg/0.76 CUFT
0.38 Kg; 24pcs/10.1 Kg/0.76 CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (available in http://www.meanwell.com) EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (available in http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (available in http://www.meanwell.com) 5. The reduction may be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 5. The reduction may be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.
5. The reduction may be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 6. Touch currentwas measured from the main entrance to the DC output. 6. Touch currentwas measured from the main entrance to the DC output.
6. Touch currentwas measured from the main entrance to the DC output. 7. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final productmanufacturers you must re-confirm this deviation that does not affect the basic safety or essential performance. 7. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final productmanufacturers you must re-confirm this deviation that does not affect the basic safety or essential performance.
7. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final productmanufacturers you must re-confirm this deviation that does not affect the basic safety or essential performance. Fi file Name:MSP-100-SPEC2014-12-08 Fi file Name:MSP-100-SPEC2014-12-08
Fi file Name:MSP-100-SPEC2014-12-08